Actions
Forum Thread Details
  • Replies 6 replies
  • Subscribers 180 subscribers
  • Views 1338 views
  • Users 0 members are here
Related

1.27MM Hole Spacing

autodeskguest

Hi,

 

I'm trying to create a new device (with a new package) that is a simple 25

pin header. The pin spacing, however, is 1.27MM with a 0.75MM diameter pin.

 

When creating holes of 0.75MM in diameter spaced 1.27MM apart, I'm able to

size the pads the way I want to, without them touching each other (more that

0.005" of spacing, 0.127MM) . However, when I go to the device view with an

image of the package, it shows the pads are now touching each other, which

means all the pins are shorted together.

 

Is there something I'm missing, maybe a setting for a min diameter for a

pad?

 

Thanks for any help,

Nick.

 

 

 

Parents

  • On 07/14/08 11:03, David Moodie wrote:

    ...

    It is the wonders of eagle's screwed up DRC

     

    ...

    Once more eagle should NEVER change anything the designer does without

    first asking if this is acceptable.

     

    ...

    Please get this sorted- check my design DO NOT CHANGE IT without asking me.

     

    The minimum restring requirement is something the board manufacturer

    will tell you. If, at any place, your board violates this requirement,

    this will typically cause the board manufacturer to get back to you

    and tell you that this board can't be manufactured at all, or needs

    to use a different manufacturing process, where the increased level

    of precision can be achieved.

     

    If you don't want EAGLE to assure the minimum restring requirement

    automatically, you can set this parameter to 0 in the design rules.

    It will then use exactly the diameters you have set in your libraries.

     

    Klaus Schmidinger

    --

    _______________________________________________________________

     

    Klaus Schmidinger                       Phone: +49-8635-6989-10

    CadSoft Computer GmbH                   Fax:   +49-8635-6989-40

    Hofmark 2                               Email:   kls@cadsoft.de

    D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de

    _______________________________________________________________

     

Reply

  • On 07/14/08 11:03, David Moodie wrote:

    ...

    It is the wonders of eagle's screwed up DRC

     

    ...

    Once more eagle should NEVER change anything the designer does without

    first asking if this is acceptable.

     

    ...

    Please get this sorted- check my design DO NOT CHANGE IT without asking me.

     

    The minimum restring requirement is something the board manufacturer

    will tell you. If, at any place, your board violates this requirement,

    this will typically cause the board manufacturer to get back to you

    and tell you that this board can't be manufactured at all, or needs

    to use a different manufacturing process, where the increased level

    of precision can be achieved.

     

    If you don't want EAGLE to assure the minimum restring requirement

    automatically, you can set this parameter to 0 in the design rules.

    It will then use exactly the diameters you have set in your libraries.

     

    Klaus Schmidinger

    --

    _______________________________________________________________

     

    Klaus Schmidinger                       Phone: +49-8635-6989-10

    CadSoft Computer GmbH                   Fax:   +49-8635-6989-40

    Hofmark 2                               Email:   kls@cadsoft.de

    D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de

    _______________________________________________________________

     

Children
No Data