Actions
Forum Thread Details
  • Replies 1 reply
  • Subscribers 178 subscribers
  • Views 216 views
  • Users 0 members are here
Related

Wrong CAM output on tStop layer-Eagle 5.1.0

autodeskguest

Hi, Sir,

 

Just upgrade 4.16r2 to 5.1.0.

 

In a tiny project, I found CAM utility cannot generate tStop layer properly.

Here attached the board for your reference.

 

Regards,

C.Y. Chen

 

 

 

 

Parents

  • On 07/17/08 09:59, Cadsoft news wrote:

    Hi, Sir,

     

    Just upgrade 4.16r2 to 5.1.0.

     

    In a tiny project, I found CAM utility cannot generate tStop layer properly.

    Here attached the board for your reference.

     

    Fixed for version 5.1.2 (see news://news.cadsoft.de/eagle.betatest,

    wjere we will announce when the next beta version will become available).

     

    As a quick workaround you can either comment out the lines

     

    AreaBegin     = "G36*\n"

    AreaEnd       = "G37*\n"

     

    from your eagle.def file (which turns off drawing rotated rectangles

    as polygons), or make sure there is at least one other object in

    the respective layer that doesn't result in a rotated rectangle.

    The problem only happens if there are no other objects than rotated

    rectangles.

     

    Klaus Schmidinger

    --

    _______________________________________________________________

     

    Klaus Schmidinger                       Phone: +49-8635-6989-10

    CadSoft Computer GmbH                   Fax:   +49-8635-6989-40

    Hofmark 2                               Email:   kls@cadsoft.de

    D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de

    _______________________________________________________________

     

Reply

  • On 07/17/08 09:59, Cadsoft news wrote:

    Hi, Sir,

     

    Just upgrade 4.16r2 to 5.1.0.

     

    In a tiny project, I found CAM utility cannot generate tStop layer properly.

    Here attached the board for your reference.

     

    Fixed for version 5.1.2 (see news://news.cadsoft.de/eagle.betatest,

    wjere we will announce when the next beta version will become available).

     

    As a quick workaround you can either comment out the lines

     

    AreaBegin     = "G36*\n"

    AreaEnd       = "G37*\n"

     

    from your eagle.def file (which turns off drawing rotated rectangles

    as polygons), or make sure there is at least one other object in

    the respective layer that doesn't result in a rotated rectangle.

    The problem only happens if there are no other objects than rotated

    rectangles.

     

    Klaus Schmidinger

    --

    _______________________________________________________________

     

    Klaus Schmidinger                       Phone: +49-8635-6989-10

    CadSoft Computer GmbH                   Fax:   +49-8635-6989-40

    Hofmark 2                               Email:   kls@cadsoft.de

    D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de

    _______________________________________________________________

     

Children
No Data