Errors in Gerber Data

Martin Smith wrote:

Hi,

 

I have just started using Eagle and am evaluating the Freeium

version. It was all going good until I finished my test design and

tried to generate some gerber files. I used the Spark Fun CAM set-up

and it created the gerbners just fine. The problem was when I checked

the output using an online gerber viewer.

 

When checked I noticed that I was getting big gaps in my top side

plane (which is a +5V plane) and whatever setting I seem to use I

can't get rid of it. I have attached a picture with the eagle .brd

file on the left and the gerber data when viewed with an online

gerber view on the right.

 

Does anyone know ehat is going on?

 

I'm guessing you are using Version 6.0, as you haven't said which version of

Eagle you are using.

Version 6.0 has Gerber polygon issues.  Move to Version 6.1

Warren

--

Viewed / responded via the newsgroup at

news.cadsoft.de

Hi,

Thanks for the reply.

I am using Version 6.1.0 for Windows - does this have issues as well? I think it is the latest release?

Martin

Martin Smith wrote:

Hi,

 

Thanks for the reply.

 

I am using Version 6.1.0 for Windows - does this have issues as well?

I think it is the latest release?

 

Martin

V6 has numerous issues.

There is a 6.1.1 beta available. Have a look at the 'eagle.betatest' forum

to see the list of fixes it contains.

The betatest forum is where many people report issues so a read through

there, as well as 'eagle.supprt.eng',  keeps you up to date with issues

being found.

Warren

--

Viewed / responded via the newsgroup at

news.cadsoft.de

Hi,

Thanks. I downloaded V6.1.1 and I still get the same problem. I have tried moving components, renaming the polygons, drawing in fresh polygons, changing the shape of the poygons and trying only 1 polygon per layer. Nothing worked and I still get the same gaps in the same places.

Very annoying...

Hi,

Thanks. I downloaded V6.1.1 and I still get the same problem. I have tried moving components, renaming the polygons, drawing in fresh polygons, changing the shape of the poygons and trying only 1 polygon per layer. Nothing worked and I still get the same gaps in the same places.

Very annoying...

Eureka!

I think I found the problem. I turned off the 'poc Coord' tick box in the CAM settings and all the gerbers were created OK.

So my next question is what does this option do?

Martin

Martin Smith wrote:

Eureka!

 

I think I found the problem. I turned off the 'poc Coord' tick box in

the CAM settings and all the gerbers were created OK.

 

So my next question is what does this option do?

 

Martin

Assuming 'pos.Coords' see the manual section 'Preparing Manufacturing Data'

/ 'Set Output Parameters'.

I feel you have found a bug that needs attention.

Warren

--

Viewed / responded via the newsgroup at

news.cadsoft.de