Does anyone know of a good, inexpensive board house?

"Ron Owens" <ron.owens@fx-engineering.com> wrote in message

news:g8a6h9$b54$1@cheetah.cadsoft.de...

Steve Jacobson wrote:

 

Does anyone know of a good, inexpensive board house that takes Eagle

Gerber

files?  I have a small 2 layer prototype board that I will stuff myself.

 

Steve

 

Hi Steve,

 

I have used PCB Express for several years for small prototype quantities

and have always gotten excellent results. You can check out their prices

at: http://www.pcbexpress.com/

 

They also have CAM files for Eagle that will produce the Gerber files they

like to see at:

http://www.pcbexpress.com/downloads/Sunstone-EagleCam.zip

 

I'm sure you could find a less expensive service. I only recommend this

one due to my past experience of more than 20 different prototype boards

they have made for me.

 

I have not used their parent company, Sunstone Circuits. For production

quantities I use a contract manufacturing company that send me fully

assembled boards. They are Assembly Technologies, Inc. in Charlotte, NC.

http://www.assemblytechinc.com/

 

Ron

Hello all,

I work as a CAM Technician at the company that Ron refers to below.  Thank

you for the referral, Ron!

Sunstone offers the same high-quality quick-turn board fab from both

PCBexpress.com and Sunstone.com. Both sites will work, but we often receive

feedback from our newer customers that the sunstone.com ordering process is

easier to use than pcbexpress.com.

Since we have very many EAGLE users, we also offer free Design Rule Decks

for EAGLE for our 2, 4, & 6 layer boards.  They are available on the

downloads page that Ron referred to and also on CadSoft Website on the

Miscellaneous Download page

http://www.cadsoft.de/cgi-bin/download.pl?page=/home/cadsoft/html_public/download.htm.en&dir=eagle/userfiles/misc&sort=time.

If you need anything further, please feel free to contact me.

Terri Miller

tmiller@sunstone.com

"Ron Owens" <ron.owens@fx-engineering.com> wrote in message

news:g8a6h9$b54$1@cheetah.cadsoft.de...

Steve Jacobson wrote:

 

Does anyone know of a good, inexpensive board house that takes Eagle

Gerber

files?  I have a small 2 layer prototype board that I will stuff myself.

 

Steve

 

Hi Steve,

 

I have used PCB Express for several years for small prototype quantities

and have always gotten excellent results. You can check out their prices

at: http://www.pcbexpress.com/

 

They also have CAM files for Eagle that will produce the Gerber files they

like to see at:

http://www.pcbexpress.com/downloads/Sunstone-EagleCam.zip

 

I'm sure you could find a less expensive service. I only recommend this

one due to my past experience of more than 20 different prototype boards

they have made for me.

 

I have not used their parent company, Sunstone Circuits. For production

quantities I use a contract manufacturing company that send me fully

assembled boards. They are Assembly Technologies, Inc. in Charlotte, NC.

http://www.assemblytechinc.com/

 

Ron

Hello all,

I work as a CAM Technician at the company that Ron refers to below.  Thank

you for the referral, Ron!

Sunstone offers the same high-quality quick-turn board fab from both

PCBexpress.com and Sunstone.com. Both sites will work, but we often receive

feedback from our newer customers that the sunstone.com ordering process is

easier to use than pcbexpress.com.

Since we have very many EAGLE users, we also offer free Design Rule Decks

for EAGLE for our 2, 4, & 6 layer boards.  They are available on the

downloads page that Ron referred to and also on CadSoft Website on the

Miscellaneous Download page

http://www.cadsoft.de/cgi-bin/download.pl?page=/home/cadsoft/html_public/download.htm.en&dir=eagle/userfiles/misc&sort=time.

If you need anything further, please feel free to contact me.

Terri Miller

tmiller@sunstone.com