Actions
Forum Thread Details
  • State Not Answered
  • Replies 3 replies
  • Subscribers 180 subscribers
  • Views 387 views
  • Users 0 members are here
Related

Difference entre Schematics et Board

gblpcml

Hi,

 

I Am new user of eagle. for my first project, I have differences between my schematic and the board. for example, I have a net for a pin of connector not indiqued in the board. Also, I have two pin connected in the board witch not connected in schematic !...

Is it possible to control nets beetween both ?

 

Thanks

 

Gérald

Parents
  • 0

    Hi Gérald,

    that's not how it should be. Both files should be sychronised.

     

    Having a wire on the board (but not the Sch.) is the easy one to explain.

    You've added a "wire" on the board. That's a beginners trap as Eagle does not treat a "Wire" drawn on the board as part of the circuit. All connections must be made on the scematic first.

     

    If you have wire on the schematic that does not appear on the board, most likely it is not connected at one end.

    Try moving the sympol at each end of the wire (schematic) and see if the wire moves with it. This will show if the wire is connected.

     

    Hint: never edit ether a schematic or board when the pair isn't open. You'll loose synchronisation and it can be traumatic making things good again.

     

    ian

  • 0 in reply to Former Member

    Hi ian,

     

    It's OK, I found errors with you're explanations. As you tell, I have wire not connected and I sees it when I move component. I have also another error with a package I do.

    My problem's are resolved

     

    Thank you

Reply Children
No Data