Actions
Forum Thread Details
  • State Not Answered
  • Replies 10 replies
  • Subscribers 172 subscribers
  • Views 1378 views
  • Users 0 members are here
Related

How to display complete net (multiple sheets) in Schematic editor

guido36

Hello,

 

I was wondering if it is possible to display (or highlight) the complete net (on multiple sheets) in the schematic editor?

 

To explain this in more detail, I can tell how this worked in another tool I worked with:

- Open a schematic with multiple sheets.

- Select a net that is used on several sheets.

- The schematic editor showed in a dropdown box (which contains all the sheets) all the sheets which contains that particulair net in bold.

- When selecting these sheets, the selected net stayed highlighted.

 

Does this function also exist in Eagle (I am using Eagle 6.4.0)?

Now I am searching all the sheets to check were this net appears (with a bit of help with the cross reference labels).

 

Thanks,

 

Guido

Parents
  • 0

    Am 05.06.2013 14:50, schrieb Guido Vermeulen:

    - Open a schematic with multiple sheets.

    - Select a net that is used on several sheets.

    - The schematic editor showed in a dropdown box (which contains all the

    sheets) all the sheets which contains that particulair net in bold.

    - When selecting these sheets, the selected net stayed highlighted.

     

    This can be done with my ULP 'find':

      - Either type, e.g. 'run find n$2' into the command line

      - or type 'run find' to display a dialog box.

     

    If a net is only available on ONE sheet, it is shown and highlighted. If

    a net is distributed over several sheets, you get the corresponding list

    of sheets you desire.

     

    The ULP can also find parts, gates, elements, nets, signals, busses,

    classes, mathematical values (e.g. '1k1' also finds '1100', '1.1k',

    etc.), packages, devices,...

     

    If you're interested in the ULP, I can send it to you.

     

    Andreas Weidner

     

     

  • 0 in reply to autodeskguest

    Thank you for the responses.

     

    Andreas, I am very intrested in your ULP "find".

    I am quite new here, can you tell me how I can give you my email address without writing it down in this post?

     

    I tried already to mail you via this forum but I couldn't find your name in the member list.

     

    Guido

  • 0 in reply to guido36

    Hello Guido,

     

    Am 06.06.2013 11:46, schrieb Guido Vermeulen:

    Andreas, I am very intrested in your ULP "find".

    I am quite new here, can you tell me how I can give you my email address

    without writing it down in this post?

     

    You can reply to my personal e-mail address, which is the one under

    which I write my posts. You should be able to see it in the FROM field

    of all my messages, or here:

       andreas.weidner@aei.mpg.de

     

    Cheers,

    Andreas

     

  • 0 in reply to autodeskguest

    Andreas Weidner schrieb:

     

    You can reply to my personal e-mail address, which is the one under

    which I write my posts. You should be able to see it in the FROM field

    of all my messages,

     

    That crappy web interface at element 14 doesn't even show the FROM

    content...

     

    Tilmann

     

  • 0 in reply to autodeskguest

    Am 06.06.2013 13:34, schrieb Tilmann Reh:

    That crappy web interface at element 14 doesn't even show the FROM

    content...

     

    Ah, I was already wondering.... I now

      - tried to look at the web interface,

      - couldn't find it from the Farnell site,

      - tried it from the CadSoft site,

      - found it there, clicked and

      - nothing happened but an error message 'nothing found'.

        This was shown for ALL forums.

     

    It appears that either the element14 links on the CadSoft site are

    broken, or that something else is amiss...

     

    Andreas Weidner

     

     

  • 0 in reply to autodeskguest

    Andreas Weidner schrieb:

     

    Am 06.06.2013 13:34, schrieb Tilmann Reh:

    That crappy web interface at element 14 doesn't even show the FROM

    content...

     

    Ah, I was already wondering.... I now

      - tried to look at the web interface,

      - couldn't find it from the Farnell site,

      - tried it from the CadSoft site,

      - found it there, clicked and

      - nothing happened but an error message 'nothing found'.

        This was shown for ALL forums.

     

    It appears that either the element14 links on the CadSoft site are

    broken, or that something else is amiss...

     

    From the web sites, it is pretty well hidden indeed. At element14.com,

    you need to select "the knode", then "Forums", then "CadSoft EAGLE",

    then the appropriate group. It's really hard to make it worse.

     

    But try the link in the footer of Guidos post.

     

    Tilmann

     

     

     

Reply
  • 0 in reply to autodeskguest

    Andreas Weidner schrieb:

     

    Am 06.06.2013 13:34, schrieb Tilmann Reh:

    That crappy web interface at element 14 doesn't even show the FROM

    content...

     

    Ah, I was already wondering.... I now

      - tried to look at the web interface,

      - couldn't find it from the Farnell site,

      - tried it from the CadSoft site,

      - found it there, clicked and

      - nothing happened but an error message 'nothing found'.

        This was shown for ALL forums.

     

    It appears that either the element14 links on the CadSoft site are

    broken, or that something else is amiss...

     

    From the web sites, it is pretty well hidden indeed. At element14.com,

    you need to select "the knode", then "Forums", then "CadSoft EAGLE",

    then the appropriate group. It's really hard to make it worse.

     

    But try the link in the footer of Guidos post.

     

    Tilmann

     

     

     

Children
No Data