Libraries for LGA-16 anyone?

The package outline is a good start.  Is it correctly centered and the right

dimension of  7.5 by 4.4mm?  I suggest you make the GRID size = .01mm ,

since all of the placement coordinates are at .05mm resolution.  You will

have to scroll in to see the grid, but it makes placement easier.  For the

smd pads you use the SMD button (a red rectangle next to the round green PAD

button).  When you click on the SMD button, an SMD properties bar will

appear in the top menu bar area.  Boxes with "Smd:" "Roundness" and "Angle"

are displayed.  In the "Smd:" box, enter the P1 and P2 dimensions given in

the PDF.  So you should enter 0.975 x 0.65  wrote in message

news:9c3hq41tp95ccof5t39rvv675rrchlnme4@4ax.com...

Hey, thanks...

 

I've been trying for the last hours to work that out, but all I have

is a rectangle...

 

Can I make a pad from a rectangle in stead of using a pad?

I'ts hard to make a rectangle pad with certain dimensions.

I made one from two square pads, grouped them, and tried to copy

them...

Didn't succeed..

 

Quickly?? Not for me..

 

Thanks

 

The PDF for the  LIS3LV02DLLIS3LV02DL has the pad dimensions for it's footprint You

can make your own quite quickly if no one has one to share.

 

 

<test@testnospam.nl> wrote in message

news:deeeq41bkm7ea8j4dm6fr87vbv0360sjiq@4ax.com...

Has anyone a library with the LGA-16 design in it?

 

I'm want to use LIS3LV02DL (STMicroelectronics) or MMA7455L (Freescale

Semiconductor).

 

Anywhere to be found in the libraries??

 

Thank you

The package outline is a good start.  Is it correctly centered and the right

dimension of  7.5 by 4.4mm?  I suggest you make the GRID size = .01mm ,

since all of the placement coordinates are at .05mm resolution.  You will

have to scroll in to see the grid, but it makes placement easier.  For the

smd pads you use the SMD button (a red rectangle next to the round green PAD

button).  When you click on the SMD button, an SMD properties bar will

appear in the top menu bar area.  Boxes with "Smd:" "Roundness" and "Angle"

are displayed.  In the "Smd:" box, enter the P1 and P2 dimensions given in

the PDF.  So you should enter 0.975 x 0.65  wrote in message

news:9c3hq41tp95ccof5t39rvv675rrchlnme4@4ax.com...

Hey, thanks...

 

I've been trying for the last hours to work that out, but all I have

is a rectangle...

 

Can I make a pad from a rectangle in stead of using a pad?

I'ts hard to make a rectangle pad with certain dimensions.

I made one from two square pads, grouped them, and tried to copy

them...

Didn't succeed..

 

Quickly?? Not for me..

 

Thanks

 

The PDF for the  LIS3LV02DLLIS3LV02DL has the pad dimensions for it's footprint You

can make your own quite quickly if no one has one to share.

 

 

<test@testnospam.nl> wrote in message

news:deeeq41bkm7ea8j4dm6fr87vbv0360sjiq@4ax.com...

Has anyone a library with the LGA-16 design in it?

 

I'm want to use LIS3LV02DL (STMicroelectronics) or MMA7455L (Freescale

Semiconductor).

 

Anywhere to be found in the libraries??

 

Thank you