Actions
Forum Thread Details
  • Replies 9 replies
  • Subscribers 178 subscribers
  • Views 874 views
  • Users 0 members are here
Related

Libraries for LGA-16 anyone?

autodeskguest

Has anyone a library with the LGA-16 design in it?

 

I'm want to use LIS3LV02DL (STMicroelectronics) or MMA7455L (Freescale

Semiconductor).

 

Anywhere to be found in the libraries??

 

Thank you

 

Parents

  • Attached is a library with a correct layout according to the PDF.  According

    to the dimensions in the PDF, the soldermask is P1 - T1 = .175  and  P2 - T2

    = .150 so the mask is slightly bigger in one direction by .025.  No big deal

    but something to note.  Also the outline is slightly enlarged so that the

    silkscreen doesn't overwrite the solder area.   I didn't read the stencil

    requirements for paste, but I figured you could try to take it from here.

    Good luck and have fun!  I do my schematics on paper so I don't have/use the

    schematic editor.

     

     

    <test@testnospam.nl> wrote in message

    news:fb3iq4lp02uhaai7r7opr1btpu25dsvd7l@4ax.com...

    Thank you all again, will try again this night.

    The problem is that I need to learn it and need to have a small PCB by

    Tuesday.

     

    Will try my best.

     

Reply

  • Attached is a library with a correct layout according to the PDF.  According

    to the dimensions in the PDF, the soldermask is P1 - T1 = .175  and  P2 - T2

    = .150 so the mask is slightly bigger in one direction by .025.  No big deal

    but something to note.  Also the outline is slightly enlarged so that the

    silkscreen doesn't overwrite the solder area.   I didn't read the stencil

    requirements for paste, but I figured you could try to take it from here.

    Good luck and have fun!  I do my schematics on paper so I don't have/use the

    schematic editor.

     

     

    <test@testnospam.nl> wrote in message

    news:fb3iq4lp02uhaai7r7opr1btpu25dsvd7l@4ax.com...

    Thank you all again, will try again this night.

    The problem is that I need to learn it and need to have a small PCB by

    Tuesday.

     

    Will try my best.

     

Children
No Data