Actions
Forum Thread Details
  • State Not Answered
  • Replies 4 replies
  • Subscribers 168 subscribers
  • Views 1498 views
  • Users 0 members are here
Related

Ratsnest not creating ground plane

peterdegroot

I have a double sided board with ground planes on top and bottom planes. I have done this for another board and it has worked fine before.

 

Eagle creates the ground plane fine for the bottom layer but not the top layer. I have checked the polygon definition and it seems fine (name GND and solid fill). I have also deleted the polygon and recreated it.

 

Any ideas ? I have attached the brd file.

Attachments:
dualLM3886b.brd.zip
Parents
  • 0

    Am 24.09.2014 um 23:35 schrieb Peter de Groot:

    I have a double sided board with ground planes on top and bottom planes.

    I have done this for another board and it has worked fine before.

     

    Eagle creates the ground plane fine for the bottom layer but not the top

    layer. I have checked the polygon definition and it seems fine (name GND

    and solid fill). I have also deleted the polygon and recreated it.

     

    Any ideas ? I have attached the brd file.

     

    --

    To view any images and attachments in this post, visit:

    http://www.element14.com/community/message/127145

     

    Attachments:

    dualLM3886b.brd.zip

     

    You have placed a POLYGON 'GND' over a Cutout-Polygon!

    Delete the Cutout-Polygon, then the GND-Polygon can filled the area!

     

    ***

    Um das Original zu lesen, und auch zuverlässig angehängte Dateien

    bereitstellen zu können, benutzen Sie news.cadsoft.de und einen

    funktionierenden News-Reader wie Thunderbird!

    ***

     

    Mit freundlichen Grüßen / Best regards

     

    Alfred Zaffran

    --

     

    • The new EAGLE V7 has landed *

    ______________________________________________________________

    Alfred Zaffran              Support

    CadSoft Computer GmbH       Hotline:   08635-698930

    Pleidolfweg 15              FAX:       08635-698940

    84568 Pleiskirchen          eMail: <alf@cadsoft.de>

                                 Web:   <www.cadsoft.de>

    Registergericht: Amtsgericht Traunstein HRB 5573

    Geschaeftsfuehrer: Mark Whiteling

    ______________________________________________________________

     

Reply
  • 0

    Am 24.09.2014 um 23:35 schrieb Peter de Groot:

    I have a double sided board with ground planes on top and bottom planes.

    I have done this for another board and it has worked fine before.

     

    Eagle creates the ground plane fine for the bottom layer but not the top

    layer. I have checked the polygon definition and it seems fine (name GND

    and solid fill). I have also deleted the polygon and recreated it.

     

    Any ideas ? I have attached the brd file.

     

    --

    To view any images and attachments in this post, visit:

    http://www.element14.com/community/message/127145

     

    Attachments:

    dualLM3886b.brd.zip

     

    You have placed a POLYGON 'GND' over a Cutout-Polygon!

    Delete the Cutout-Polygon, then the GND-Polygon can filled the area!

     

    ***

    Um das Original zu lesen, und auch zuverlässig angehängte Dateien

    bereitstellen zu können, benutzen Sie news.cadsoft.de und einen

    funktionierenden News-Reader wie Thunderbird!

    ***

     

    Mit freundlichen Grüßen / Best regards

     

    Alfred Zaffran

    --

     

    • The new EAGLE V7 has landed *

    ______________________________________________________________

    Alfred Zaffran              Support

    CadSoft Computer GmbH       Hotline:   08635-698930

    Pleidolfweg 15              FAX:       08635-698940

    84568 Pleiskirchen          eMail: <alf@cadsoft.de>

                                 Web:   <www.cadsoft.de>

    Registergericht: Amtsgericht Traunstein HRB 5573

    Geschaeftsfuehrer: Mark Whiteling

    ______________________________________________________________

     

Children