Can't find AP1117E50G-13 SOT-223 or equivalent in libs

Am 10.05.2015 um 02:53 schrieb Virtual Insanity:

Hi, am doing my first schematic in Eagle and am having trouble finding

specific components.

All the tutorials make it look like it just works, but i'm finding that

isn't really the case.

 

I am interested in using a LDO regulator like the AP1117E50G-13.

 

I have added the Diode, TI and a couple of other libs from Element 14 to

try to ensure the components in question are available.

There are now components from these manufacturers available when i

attempt to drop a component, but the are still lacking the LDO

regulators with the pinout i need (the 78xx variant is available, but

the pinout is not compatible)

 

I need an SOT-223 i can use in the schematic and PCB design where pin 1

= GND/ADJ, 2 = Vout(connected to tab) and 3 = Vin.

 

Surely there is a way to do this without re-inventing the wheel, any

suggestions of where i might be going wrong?

Is there a SUPER Library available somewhere that will add this kind of

stuff?

 

Thanks.

 

--

To view any images and attachments in this post, visit:

http://www.element14.com/community/message/149395

Please search packages from a BOARD !

USE *

ADD SOT-223

HELP USE

HELP ADD

Mit freundlichen Grüßen / Best regards

Alfred Zaffran

--

______________________________________________________________

Alfred Zaffran              Support

CadSoft Computer GmbH       Hotline:   08635-698930

Pleidolfweg 15              FAX:       08635-698940

84568 Pleiskirchen          eMail: <alf@cadsoft.de>

                             Web:   <www.cadsoft.de>

Registergericht: Amtsgericht Traunstein HRB 5573

Geschaeftsfuehrer: Mark Whiteling

______________________________________________________________

Am 10.05.2015 um 02:53 schrieb Virtual Insanity:

Hi, am doing my first schematic in Eagle and am having trouble finding

specific components.

All the tutorials make it look like it just works, but i'm finding that

isn't really the case.

 

I am interested in using a LDO regulator like the AP1117E50G-13.

 

I have added the Diode, TI and a couple of other libs from Element 14 to

try to ensure the components in question are available.

There are now components from these manufacturers available when i

attempt to drop a component, but the are still lacking the LDO

regulators with the pinout i need (the 78xx variant is available, but

the pinout is not compatible)

 

I need an SOT-223 i can use in the schematic and PCB design where pin 1

= GND/ADJ, 2 = Vout(connected to tab) and 3 = Vin.

 

Surely there is a way to do this without re-inventing the wheel, any

suggestions of where i might be going wrong?

Is there a SUPER Library available somewhere that will add this kind of

stuff?

 

Thanks.

 

--

To view any images and attachments in this post, visit:

http://www.element14.com/community/message/149395

Please search packages from a BOARD !

USE *

ADD SOT-223

HELP USE

HELP ADD

Mit freundlichen Grüßen / Best regards

Alfred Zaffran

--

______________________________________________________________

Alfred Zaffran              Support

CadSoft Computer GmbH       Hotline:   08635-698930

Pleidolfweg 15              FAX:       08635-698940

84568 Pleiskirchen          eMail: <alf@cadsoft.de>

                             Web:   <www.cadsoft.de>

Registergericht: Amtsgericht Traunstein HRB 5573

Geschaeftsfuehrer: Mark Whiteling

______________________________________________________________