I got a new computer. My old license file is for a 32 bit, and apparently not valid for the 64 bit version.
What can I do?
On 6/11/2015 4:13 PM, David Smead wrote:
I got a new computer. My old license file is for a 32 bit, andapparently not valid for the 64 bit version. What can I do? --To view any images and attachments in this post, visit:http://www.element14.com/community/message/152382
I got a new computer. My old license file is for a 32 bit, and
apparently not valid for the 64 bit version.
--
To view any images and attachments in this post, visit:
http://www.element14.com/community/message/152382
Hi David,
I hope you're doing well. Licenses are not dependent on the system
architecture, what errors are you seeing?
Only two things can ever be wrong when licensing EAGLE. Either your
installation code or your key file are incorrect. With a little more
info I think I can get you up and running.
hth,
Jorge Garcia
Jorge Garcia wrote on Fri, 12 June 2015 11:59
I got a new computer. My old license file is for a 32 bit, and apparently not valid for the 64 bit version. What can I do? -- To view any images and attachments in this post, visit: http://www.element14.com/community/message/152382
Hi David, I hope you're doing well. Licenses are not dependent on the system architecture, what errors are you seeing? Only two things can ever be wrong when licensing EAGLE. Either your installation code or your key file are incorrect. With a little more info I think I can get you up and running. hth,Jorge Garcia
That's over-simplifying it Jorge. The whole mess with version 7.0 (and
only 7.0) could be what he is referring to. He may have setup the license
server on a 32-bit machine and now that same install won't work on 64-bit.
Just speculating but the release of the v7.0 license makes this
conversation more complicated.
James.
James Morrison ~~~ Stratford Digital
Order your EAGLE license right now from Stratford Digital at
http://www.eaglecentral.ca
Web access to CadSoft support forums at www.eaglecentral.ca. Where the CadSoft EAGLE community meets.
The error is:
Your license is not valid for this version of EAGLE!
Please contact CadSoft for an upgrade.
I have 7.2 on by 32-bit machine and I'm trying to install 7.3 on the 64-bit
machine.
David Smead
CadSoft Guest http://www.element14.com/community/people/cadsoftnntpcreated the discussion "Need license to move to 64 bit Linu x." To view the discussion, visit:http://www.element14.com/community/message/152499/l/re-need-license-to-move-to-64-bit-linu-x#152499
CadSoft Guest http://www.element14.com/community/people/cadsoftnntp
created the discussion
"Need license to move to 64 bit Linu
x."
To view the discussion, visit:
http://www.element14.com/community/message/152499/l/re-need-license-to-move-to-64-bit-linu-x#152499
>
That's over-simplifying it Jorge. The whole mess with version 7.0 (andonly 7.0) could be what he is referring to. He may have setup the licenseserver on a 32-bit machine and now that same install won't work on 64-bit.Just speculating but the release of the v7.0 license makes thisconversation more complicated. James.
That's a valid point, James. Nice to hear from you, hadn't seen you in
the forums in a while. Let's see what the user comes up with.
Best Regards,
I have 7.2 on by 32-bit machine and I'm trying to install 7.3 on the64-bitmachine.
I have 7.2 on by 32-bit machine and I'm trying to install 7.3 on the
64-bit
That would mean that you are likely using an older version of your key
file. Please e-mail me support@cadsoftusa.com with your serial number
and I'll send you a new packing list so that you can download your most
recent key file and installation code.
The new packing list contents did not allow me to install the 64 bit version. I get the same error.
I'm trying to install in /usr/local/bin/eagle as root.
Are there files laying around I need to purge. I'm getting impatient.
On 6/17/2015 11:26 PM, David Smead wrote:
The new packing list contents did not allow me to install the 64 bitversion. I get the same error. I'm trying to install in /usr/local/bin/eagle as root. Are there files laying around I need to purge. I'm getting impatient.
The new packing list contents did not allow me to install the 64 bit
version. I get the same error.
I check and you have a V7 license make sure that you are using the last
packing list I sent you to download your latest key file and
installation code. The name of the key file doesn't change but the
internals do, so make sure you are using the correct one.
The error you mention would seem to indicate that you don't have a V7
license, but that's not the case.
Here are the top two lines of the key file:
CadSoft License Registration File
Copyright (c) 2015 CadSoft
The activation code is the same as the earlier version.
I don't think I'm doing anything out of the ordinary, installing in the same directory as my 32-bit machine.
I need this to work!!!!!!! NOW.
On 6/21/2015 4:09 AM, David Smead wrote:
Here are the top two lines of the key file:CadSoft License Registration FileCopyright (c) 2015 CadSoft The activation code is the same as the earlier version. I don't think I'm doing anything out of the ordinary, installing in thesame directory as my 32-bit machine. I need this to work!!!!!!! NOW. --To view any images and attachments in this post, visit:http://www.element14.com/community/message/153243
I don't think I'm doing anything out of the ordinary, installing in the
same directory as my 32-bit machine.
http://www.element14.com/community/message/153243
OK, let's get to bottom of this. Here's the office number call me and
we'll get this done in one phone call. Something is not lining up and I
think over the phone we can figure this out.
954-237-0932.
If you would prefer that I call you then e-mail me your number to
support@cadsoftusa.com.
