Is this group still active?

Thanks for posting my reply over to the forums Oppie, and your comment, Rachel. It looks like posts from the forums are coming IN to the Community, but posts from the Community are not going OUT. So I think something on our network is still blocked but only in one direction. We're going to keep on this until we get it right. Apologies again for the delay and inconvenience.

Sincerely,

Christy - element14

Christy- does it make any difference that when I access the nntp Cadsoft NG through a newsreader, no login credentials need be entered. In order to use the Element14 forum, afik, one has to login to post? Was wondering if this might be an issue?

It shouldn't be an issue for the sync to work. It might be an issue in terms of having your posts appear on element14 using your correct username here. Is there something else you were referring to about it "being an issue"?

It does look like posts from the Community are starting to export again now, so we'll keep monitoring and hopefully that's got it.

Thanks for your assistance and patience.

Christy - element14

We found that there was a problem with the linkage. The community website runs with four separate servers, and one of those four had a connectivity problem with the news group. If a user posted a reply on community and that reply was handled by the server with issues, the link failed, and that meant the user thought they had made a reply, could see their reply on community, but that reply never made it out to the newsgroup.

That meant that discussions were occasionally being orphaned, ironically including Christy's reply here to the newsgroup!

We've now fixed that linkage error, so we should (hopefully) now have no problems and everything should be working fine.

If there are any problems, either reply here, or poke me on the link below

Dudley

Dudley

"Dudley Nelson" <dnelson@premierfarnell.com> wrote in message > We found

that there was a problem with the linkage. The community

website runs with four separate servers, and one of those four had a

connectivity problem with the news group.

Dudley

 

Much appreciated Dudley

Hi Dudley,

It seems there is still a problem with the link unfortunately. Any posts made over in Eagle Central appear multiple times over in this Element14 forum it seems.

Best Regards,

Rachael

Thanks for letting us know.. we've found the source of the duplicates issue and a fix is in progress. It'll need to get tested and deployed in an upcoming release.

Matt.

Because we can't resolve the duplicate issue until our release on May 10th, we've temporarily shut off the syncing between element14 and the CadSoft forums until that fix is deployed. I'm posting this here on element14 expecting that it will not sync to the forums (and I'll go post a message to the forums directly).

As soon as we have that fix deployed (as it requires a full build of our code-base) we will re-enable the sync and any messages that have been posted between the two sites should sync and the duplication issue will be resolved (has been resolved in our test environment).

We apologize for the inconvenience but this should have it licked this time! Thanks for your patience.

Christy - development director, element14

Hi everyone,

Because we can't resolve the duplicate issue until our release on May 10th,

we've temporarily shut off the syncing between element14 and the CadSoft

forums until that fix is deployed.

As soon as we have that fix deployed (as it requires a full build of our

code-base) we will re-enable the sync and any messages that have been

posted between the two sites should sync and the duplication issue will be

resolved (has been resolved in our test environment).

We apologize for the inconvenience but this should have it licked this

time! Thanks for your patience.

Christy - Development & Platform Director, element14

--

Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

Hi everyone,

Because we can't resolve the duplicate issue until our release on May 10th,

we've temporarily shut off the syncing between element14 and the CadSoft

forums until that fix is deployed.

As soon as we have that fix deployed (as it requires a full build of our

code-base) we will re-enable the sync and any messages that have been

posted between the two sites should sync and the duplication issue will be

resolved (has been resolved in our test environment).

We apologize for the inconvenience but this should have it licked this

time! Thanks for your patience.

Christy - Development & Platform Director, element14

--

Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

Hi everyone,

Because we can't resolve the duplicate issue until our release on May 10th,

we've temporarily shut off the syncing between element14 and the CadSoft

forums until that fix is deployed.

As soon as we have that fix deployed (as it requires a full build of our

code-base) we will re-enable the sync and any messages that have been

posted between the two sites should sync and the duplication issue will be

resolved (has been resolved in our test environment).

We apologize for the inconvenience but this should have it licked this

time! Thanks for your patience.

Christy - Development & Platform Director, element14

--

Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.