Ratsnest doing weird things

On 9/19/2016 6:17 AM, Morten Leikvoll wrote:

This happened many versions ago. I have been thinking of posting this

for a long time, but always ended up doing a manual ratsnest for the

wire as the quick resort. Finally here is some doc pics.

 

When routing a path from a track where there is no airwire (ctrl-click

on a wire/via/pad) Eagle ends up displaying a double airwire. See

attached img (double-airwire). Routing the blue track, starting at the

via toward C1 and stopping midway leaves the two same-net airwires. I

would like to see eagle clean up the airwire when route is finished, or

even at the first click.

 

Also, this can end up removing an airwire. See 2nd img. Start routing at

G2, shift-clicking between G2&H3 and stop (esc) there. The airwire to G1

is lost, but you can see it is the same net.

 

Can you please fix this?

Hello Morten,

I hope you're doing well. The devs are asking for sample files

illustrating the issue for analysis and correction.

If you can, e-mail the files to support@cadsoftusa.com.

Best Regards,

Jorge Garcia

On 27.09.2016 20:29, Jorge Garcia wrote:

On 9/19/2016 6:17 AM, Morten Leikvoll wrote:

This happened many versions ago. I have been thinking of posting this

for a long time, but always ended up doing a manual ratsnest for the

wire as the quick resort. Finally here is some doc pics.

 

When routing a path from a track where there is no airwire (ctrl-click

on a wire/via/pad) Eagle ends up displaying a double airwire. See

attached img (double-airwire). Routing the blue track, starting at the

via toward C1 and stopping midway leaves the two same-net airwires. I

would like to see eagle clean up the airwire when route is finished, or

even at the first click.

 

Also, this can end up removing an airwire. See 2nd img. Start routing at

G2, shift-clicking between G2&H3 and stop (esc) there. The airwire to G1

is lost, but you can see it is the same net.

 

Can you please fix this?

 

Hello Morten,

 

I hope you're doing well. The devs are asking for sample files

illustrating the issue for analysis and correction.

 

If you can, e-mail the files to support@cadsoftusa.com.

 

Best Regards,

Jorge Garcia

Mail sent, let me know if you don't find it

On 27.09.2016 20:29, Jorge Garcia wrote:

On 9/19/2016 6:17 AM, Morten Leikvoll wrote:

This happened many versions ago. I have been thinking of posting this

for a long time, but always ended up doing a manual ratsnest for the

wire as the quick resort. Finally here is some doc pics.

 

When routing a path from a track where there is no airwire (ctrl-click

on a wire/via/pad) Eagle ends up displaying a double airwire. See

attached img (double-airwire). Routing the blue track, starting at the

via toward C1 and stopping midway leaves the two same-net airwires. I

would like to see eagle clean up the airwire when route is finished, or

even at the first click.

 

Also, this can end up removing an airwire. See 2nd img. Start routing at

G2, shift-clicking between G2&H3 and stop (esc) there. The airwire to G1

is lost, but you can see it is the same net.

 

Can you please fix this?

 

Hello Morten,

 

I hope you're doing well. The devs are asking for sample files

illustrating the issue for analysis and correction.

 

If you can, e-mail the files to support@cadsoftusa.com.

 

Best Regards,

Jorge Garcia

Mail sent, let me know if you don't find it