Actions
Forum Thread Details
  • Replies 1 reply
  • Subscribers 180 subscribers
  • Views 388 views
  • Users 0 members are here
Related

How designing silkscreen a PCB for RF applications

autodeskguest

Hi, I'm using Eagle and designing a PCB for RF applications and need to

create a shield or border with gold bath in which some RF components are

placed, but I nedd that is free of the mask silkscreen, as you can see in

the picture, someone could tell me how I can do in Eagle?

 

 

--

Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

 

Parents

  • wsalas wrote on Fri, 07 October 2016 00:59

    Hi, I'm using Eagle and designing a PCB for RF applications and need to

    create a shield or border with gold bath in which some RF components are

    placed, but I nedd that is free of the mask silkscreen, as you can see in

    the picture, someone could tell me how I can do in Eagle?

     

     

    Hello,

     

    I assume you mean you need it to be free of the solder mask (silkscreen is

    the legends with component references printed on it) which is fairly

    straightforward to achieve.

     

    1) Select the WIRE tool.

    2) Change layer to tStop (or bStop for the bottom side)

    3) Select a trace width to match your shield width.

    4) Draw over the top of the shield trace.

     

    Best Regards,

     

    Rachael

    --

    Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

     

Reply

  • wsalas wrote on Fri, 07 October 2016 00:59

    Hi, I'm using Eagle and designing a PCB for RF applications and need to

    create a shield or border with gold bath in which some RF components are

    placed, but I nedd that is free of the mask silkscreen, as you can see in

    the picture, someone could tell me how I can do in Eagle?

     

     

    Hello,

     

    I assume you mean you need it to be free of the solder mask (silkscreen is

    the legends with component references printed on it) which is fairly

    straightforward to achieve.

     

    1) Select the WIRE tool.

    2) Change layer to tStop (or bStop for the bottom side)

    3) Select a trace width to match your shield width.

    4) Draw over the top of the shield trace.

     

    Best Regards,

     

    Rachael

    --

    Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

     

Children
No Data