Actions
Forum Thread Details
  • Replies 1129 replies
  • Subscribers 245 subscribers
  • Views 51063 views
  • Users 0 members are here
Related

Have a question about CadSoft EAGLE?  Ask our Expert, Richard! (Archive)

nlarson

This thread is now locked - but you can still ask Richard by posting your questions here.  If you'd rather browse other member's questions you can read the CadSoft EAGLE Forums for past questions and answers. Enjoy!

 

Browse past Q&A help on anything technical relating to CadSoft EAGLE!


image

 

Richard Hammerl

Richard is an engineer with 16 years experience in EAGLE customer support and is waiting for your questions.

Parents

  • Richard,

     

    I recently sent a completed set of gerber files generated from Eagle to a PCB manufacturer. They replied saying that "no stackup information was provided in the gerber files." They needed further information on the thickness/material of the board and each of its layers. I have all of the layer specified in the DRC options for my board. My question is this: Does Eagle automatically generate the "stackup" information or do I need to manually create a text file and include this information for my PCB manufacturer?

Reply

  • Richard,

     

    I recently sent a completed set of gerber files generated from Eagle to a PCB manufacturer. They replied saying that "no stackup information was provided in the gerber files." They needed further information on the thickness/material of the board and each of its layers. I have all of the layer specified in the DRC options for my board. My question is this: Does Eagle automatically generate the "stackup" information or do I need to manually create a text file and include this information for my PCB manufacturer?

Children
  • in reply to e14 Contributor

    Hi Joey,

     

    the layer setup is part of the Design Rules, which are stored in the board file. This means hat the board manufacturer can look up the setup if he would load the file in the layout editor and look into the Design Rules.

    There he can find the values for thickness and the via lenghts.
    But it is always good to tell the board house such details like setup and via lengths in a separate note. So I'ld recommend to tell them all details separately.

     

    Regards,

    Richard