Actions
Forum Thread Details
  • State Not Answered
  • Replies 14 replies
  • Subscribers 178 subscribers
  • Views 2155 views
  • Users 0 members are here
Related

Double sided PCB design

anishkgt

Hi all,

 

Since i've started using Eagle, i am now very much familiar with designing one sided. I thought i'd try out double sided.

 

My idea is to design a PCB with a 11pin connector on one side, 8 led on the other and a POT. So that the connector do not come in the way of the LED when mounting the PCB. below is my design just need some advise if the below design is ok as a double sided design before i send it to the fab house.

 

imageimage

Parents
  • 0

    Also, use the mirror command on the variable resistor otherwise it won't work in the expected direction (unless you've compensated for that in your wiring which would then need to be corrected too).

    This is assuming you want the variable resistor on the other side.

    Right now from your question it is totally ambiguous if the connector is intended to be on other side, or the remainder components..

Reply
  • 0

    Also, use the mirror command on the variable resistor otherwise it won't work in the expected direction (unless you've compensated for that in your wiring which would then need to be corrected too).

    This is assuming you want the variable resistor on the other side.

    Right now from your question it is totally ambiguous if the connector is intended to be on other side, or the remainder components..

Children
No Data