Hi,
I want to pour GND planes on both TOP and BOTTOM layers.I placed 2 poligons(1 on top 1 on bottom) but the ground plane does not appear after i press ratsnest either from selecting the poligon right click or the left panel command.
Also the AutoRouter didn't want to route my signals,it started but it displayed as 00.0%.I did the routing manually in the end.DRC only shows Dimension errors but i belive they can be approved without much trouble.
One last thing i'd like to check is if it's the board manufacturable as it is(are the vias too small,clearance is ok,other things i may have forgotten).
Thank you.
