symbols for Eagle CAD

Hello,  (here comes the copy of my answer to the same posting you made a bit earlier)

there are different sources for libraries:

First  of all the libraries that come with EAGLE. If you are in the ADD  dialogue for adding components into your schematic you can search for  library components. In case of for example APR9600 try  *9600* as search  string. The asterisk works as a placeholder

"unsharpens" the search. EAGLE normally looks for exactly the given word.

Second we have source of additional libraries on the CadSoft website. Please take a look at http://www.cadsoft.de/downloads/libraries.

Third there are libraries available at element14.com. Follow this link:

http://www.element14.com/community/community/knode/cad_tools/cadsoft_eagle/eagle_cad_libraries

And also on farnell.com  you can find more and more EAGLE library definitions for the  components. On the product's page sometimes you find a link for an EAGLE  library.

For a good advice how to create  library components, please take a look into the EAGLE manual. Chapter 8  explains detailed how this works.

Best regards,

Richard

i want to know how to get the symbols for tssp6p38 and tsal6200 for eagle cad software,please provide me the symbols or please tell me where can i find it thanks a lot.

if possible,i want to know the symbol for apr 9600,please help me to come out that if possible...i got no other method to create...

i can't find the symbols on the link/website u mentioned,please provide me as fast as possible as i need it urgently...thanks a lot..

It's likely they may not already exist (since there are hundreds of thousands of components, it's fairly impossible to have a

complete library). So, they probably need to be created. It's not a good idea to accept someone else's symbols unless you know what you're doing and know how to correct them, because would (should) you really trust someone else's symbols? They may be incorrect, which causes weeks of headache. So, better to learn for yourself and get your design right first time.

The user manual is actually very good for this.

Unless the component is really generic (resistor, capacitor or some transistors) expect to spend time creating the components as part of the design. Schematic, board layout and component design is all needed for pretty much any design.

When I started out creating components, actually the only thing I had difficulty with was knowing what layers were for what purpose. I created the attached document - it describes what each layer does. It may help you. (It's for version 5, but may be the same for version 6 - I have not tried v6). Good luck!

Attachments:

eagle-cad-layers-reference3.pdf

http://www.youtube.com/watch?v=RIfX3fxSpNY

i found this video,at about 3 min 34 sec,it mentioned about "sin icon" can anyone tell me what is that?where can i find it on keyboard?

Hello,

I think your refer to the PIN icon which is used to place pins in the symbol definition. The PIN icon is located in the toolbar on the left and looks like this:

Regards,

Richard

no,now i'm trying to create tssp6p38,it is a new thing,so in the video he teach how to do it,but i stucked half way.or can u develope it for me?

i need 3 symbols.....

1 is tssp6p38,1 is tsal6200 these both are under vishay company,another 1 is apr 9600 voice chip.

http://www.vishay.com/docs/82475/tssp6p38.pdf

http://www.datasheetcatalog.org/datasheet/aplus/APR9600.pdf

http://www.vishay.com/docs/81010/tsal6200.pdf

can u please kindly help me to create?i had search through the net for few days,i can't do anything...

Hello zing teh,

the data sheet of  http://www.vishay.com/docs/82475/tssp6p38.pdf  are corrupt!

The pinning (text line)

1 = GND, 2 = N.C., 3 = VS, 4 = OUT

The pinning (block diagram)

2 = GND, 1 = OUT, 3 = VS

???

Hello zing teh,

for the TSAL6200 you can use LED 5mm from led.lbr.

For the APR9600 I have send a message to

CAD_Tech Element14 <CAD_Tech@element14.com>

So the apr 9600 how to get?i think u can find the data sheet on web for the tssp6p38,I get a non corrupted 1...I'm outside can't send u now..

Date: Mon, 22 Apr 2013 14:11:03 +0000

From: messages@element14.com

To: khangzing@hotmail.com

Subject: - Re: symbols for Eagle CAD

    Re: symbols for Eagle CAD

    created by ALF_Z in Forums - View the full discussion

Hello zing teh,

for the TSAL6200 you can use LED 5mm from led.lbr.

For the APR9600 I have send a message to

CAD_Tech Element14 <CAD_Tech@element14.com>

    Reply to this message by going to element14

     Start a new discussion in Forums at element14

To unsubscribe from ALL email notifications from element14 Community, Click Here

To learn how to modify your email preferences, Click Here

                                                                Sitemap |Feedback & Support | Terms of Use | FAQ | About element14                 **************************Disclaimer**************************

The contents of this e-mail and any file transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed. 

The content may also contain legal, professional or other privileged information.

If you received this e-mail in error, please destroy it immediately. 

You should not copy or use it for any purpose nor disclose its contents to any other person.

The views stated herein do not necessarily represent the view of the Company.

Please ensure you have adequate virus protection before you open or detach any documents from this transmission.

The Company does not accept any liability for  viruses.

Premier Farnell plc

150 Armley Road

Leeds

LS12 2QQ

Telephone +44 (0) 870 129 8608

Fax +44 (0) 870 129 8610

Registered in England

Company Number 876412

Registered Office: Farnell House, Forge Lane, Leeds LS12 2NE

zing teh schrieb:

 

So the apr 9600 how to get?i think u can find the data sheet on web for the tssp6p38,I get a non corrupted 1...I'm outside can't send u now..

How is the web adress of this non corrupted data sheet?

The APR9600 I have sent at pm.