symbols for Eagle CAD

Former Member over 12 years ago

who know how to draw or find the symbols for vishay TSSP6P38,TSAL6200 and aplus APR9600 voice chip?

Parents

0 Richard_H over 12 years ago

Hello, (here comes the copy of my answer to the same posting you made a bit earlier)

there are different sources for libraries:

First of all the libraries that come with EAGLE. If you are in the ADD dialogue for adding components into your schematic you can search for library components. In case of for example APR9600 try *9600* as search string. The asterisk works as a placeholder
"unsharpens" the search. EAGLE normally looks for exactly the given word.
Second we have source of additional libraries on the CadSoft website. Please take a look at http://www.cadsoft.de/downloads/libraries.
Third there are libraries available at element14.com. Follow this link:
http://www.element14.com/community/community/knode/cad_tools/cadsoft_eagle/eagle_cad_libraries
And also on farnell.com you can find more and more EAGLE library definitions for the components. On the product's page sometimes you find a link for an EAGLE library.

For a good advice how to create library components, please take a look into the EAGLE manual. Chapter 8 explains detailed how this works.

Best regards,
Richard
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Former Member over 12 years ago in reply to Richard_H

i want to know how to get the symbols for tssp6p38 and tsal6200 for eagle cad software,please provide me the symbols or please tell me where can i find it thanks a lot.

if possible,i want to know the symbol for apr 9600,please help me to come out that if possible...i got no other method to create...

i can't find the symbols on the link/website u mentioned,please provide me as fast as possible as i need it urgently...thanks a lot..
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Former Member over 12 years ago in reply to Former Member
So the apr 9600 how to get?i think u can find the data sheet on web for the tssp6p38,I get a non corrupted 1...I'm outside can't send u now..

Date: Mon, 22 Apr 2013 14:11:03 +0000
From: messages@element14.com
To: khangzing@hotmail.com
Subject: - Re: symbols for Eagle CAD











    Re: symbols for Eagle CAD

    created by ALF_Z in Forums - View the full discussion

Hello zing teh,
for the TSAL6200 you can use LED 5mm from led.lbr.
For the APR9600 I have send a message to
CAD_Tech Element14 <CAD_Tech@element14.com>

    Reply to this message by going to element14
     Start a new discussion in Forums at element14
To unsubscribe from ALL email notifications from element14 Community, Click Here

To learn how to modify your email preferences, Click Here
                                                                Sitemap |Feedback & Support | Terms of Use | FAQ | About element14                 **************************Disclaimer**************************

The contents of this e-mail and any file transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed.
The content may also contain legal, professional or other privileged information.
If you received this e-mail in error, please destroy it immediately.
You should not copy or use it for any purpose nor disclose its contents to any other person.
The views stated herein do not necessarily represent the view of the Company.

Please ensure you have adequate virus protection before you open or detach any documents from this transmission.
The Company does not accept any liability for viruses.

Premier Farnell plc
150 Armley Road
Leeds
LS12 2QQ

Telephone +44 (0) 870 129 8608

Fax +44 (0) 870 129 8610

Registered in England

Company Number 876412

Registered Office: Farnell House, Forge Lane, Leeds LS12 2NE
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Former Member over 12 years ago in reply to Former Member

zing teh schrieb:

So the apr 9600 how to get?i think u can find the data sheet on web for the tssp6p38,I get a non corrupted 1...I'm outside can't send u now..
How is the web adress of this non corrupted data sheet?

The APR9600 I have sent at pm.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Former Member over 12 years ago in reply to Former Member
this is the tssp6p38 datasheet.

Date: Tue, 23 Apr 2013 05:58:20 +0000
From: messages@element14.com
To: khangzing@hotmail.com
Subject: - Re: symbols for Eagle CAD











    Re: symbols for Eagle CAD

    created by ALF_Z in Forums - View the full discussion

zing teh schrieb: So the apr 9600 how to get?i think u can find the data sheet on web for the tssp6p38,I get a non corrupted 1...I'm outside can't send u now..How is the web adress of this non corrupted data sheet? The APR9600 I have sent at pm.

    Reply to this message by going to element14
     Start a new discussion in Forums at element14
To unsubscribe from ALL email notifications from element14 Community, Click Here

To learn how to modify your email preferences, Click Here
                                                                Sitemap |Feedback & Support | Terms of Use | FAQ | About element14                 **************************Disclaimer**************************
The contents of this e-mail and any file transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed.
The content may also contain legal, professional or other privileged information.
If you received this e-mail in error, please destroy it immediately.
You should not copy or use it for any purpose nor disclose its contents to any other person.
The views stated herein do not necessarily represent the view of the Company.
Please ensure you have adequate virus protection before you open or detach any documents from this transmission.
The Company does not accept any liability for viruses.
Premier Farnell plc
150 Armley Road
Leeds
LS12 2QQ

Telephone +44 (0) 870 129 8608

Fax +44 (0) 870 129 8610
Registered in England

Company Number 876412

Registered Office: Farnell House, Forge Lane, Leeds LS12 2NE

Attachments:
IR Sensor transmitter and receiver diode.pdf
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Former Member over 12 years ago in reply to Former Member
for tsal6200,how much voltage i should give and how many resistor should i use?

Date: Mon, 22 Apr 2013 14:01:36 +0000
From: messages@element14.com
To: khangzing@hotmail.com
Subject: - Re: symbols for Eagle CAD











    Re: symbols for Eagle CAD

    created by ALF_Z in Forums - View the full discussion

Hello zing teh, the data sheet of http://www.vishay.com/docs/82475/tssp6p38.pdf are corrupt!The pinning (text line)1 = GND, 2 = N.C., 3 = VS, 4 = OUTThe pinning (block diagram)2 = GND, 1 = OUT, 3 = VS???

    Reply to this message by going to element14
     Start a new discussion in Forums at element14
To unsubscribe from ALL email notifications from element14 Community, Click Here

To learn how to modify your email preferences, Click Here
                                                                Sitemap |Feedback & Support | Terms of Use | FAQ | About element14                 **************************Disclaimer**************************
The contents of this e-mail and any file transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed.
The content may also contain legal, professional or other privileged information.
If you received this e-mail in error, please destroy it immediately.
You should not copy or use it for any purpose nor disclose its contents to any other person.
The views stated herein do not necessarily represent the view of the Company.
Please ensure you have adequate virus protection before you open or detach any documents from this transmission.
The Company does not accept any liability for viruses.
Premier Farnell plc
150 Armley Road
Leeds
LS12 2QQ

Telephone +44 (0) 870 129 8608

Fax +44 (0) 870 129 8610
Registered in England

Company Number 876412

Registered Office: Farnell House, Forge Lane, Leeds LS12 2NE
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Former Member over 12 years ago in reply to Former Member

zing teh schrieb:

this is the tssp6p38 datasheet.
? where ? web page ?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Former Member over 12 years ago in reply to Former Member
i had attach the pdf file which is tssp6p38 datasheet,where i download i forgotten.
Date: Tue, 23 Apr 2013 09:53:23 +0000
From: messages@element14.com
To: khangzing@hotmail.com
Subject: - Re: symbols for Eagle CAD











    Re: symbols for Eagle CAD

    created by ALF_Z in Forums - View the full discussion

zing teh schrieb: this is the tssp6p38 datasheet.? where ? web page ?

    Reply to this message by going to element14
     Start a new discussion in Forums at element14
To unsubscribe from ALL email notifications from element14 Community, Click Here

To learn how to modify your email preferences, Click Here
                                                                Sitemap |Feedback & Support | Terms of Use | FAQ | About element14                 **************************Disclaimer**************************
The contents of this e-mail and any file transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed.
The content may also contain legal, professional or other privileged information.
If you received this e-mail in error, please destroy it immediately.
You should not copy or use it for any purpose nor disclose its contents to any other person.
The views stated herein do not necessarily represent the view of the Company.
Please ensure you have adequate virus protection before you open or detach any documents from this transmission.
The Company does not accept any liability for viruses.
Premier Farnell plc
150 Armley Road
Leeds
LS12 2QQ

Telephone +44 (0) 870 129 8608

Fax +44 (0) 870 129 8610
Registered in England

Company Number 876412

Registered Office: Farnell House, Forge Lane, Leeds LS12 2NE

Attachments:
IR Sensor transmitter and receiver diode.pdf
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Former Member over 12 years ago in reply to Former Member

where do you get this pdf, URL?
I always get the corrupted data sheet <http://www.vishay.com/docs/82475/tssp6p38.pdf>
The link of farnell online http://de.farnell.com/vishay/tssp6p38tr/ir-sensor-smd-f-naeherung-38khz/dp/2251451?Ntt=TSSP6P38 also.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Former Member over 12 years ago in reply to Former Member
i forgotten,long time ago,the 1 i give u,u can make the symbol right?and for the apr9600,i didnt receive anything,the file u sent has been removed,please check and see-.-

Date: Tue, 23 Apr 2013 14:13:22 +0000
From: messages@element14.com
To: khangzing@hotmail.com
Subject: - Re: symbols for Eagle CAD











    Re: symbols for Eagle CAD

    created by ALF_Z in Forums - View the full discussion

where do you get this pdf, URL?I always get the corrupted data sheet <http://www.vishay.com/docs/82475/tssp6p38.pdf> The link of farnell online http://de.farnell.com/vishay/tssp6p38tr/ir-sensor-smd-f-naeherung-38khz/dp/2251451?Ntt=TSSP6P38 also.

    Reply to this message by going to element14
     Start a new discussion in Forums at element14
To unsubscribe from ALL email notifications from element14 Community, Click Here

To learn how to modify your email preferences, Click Here
                                                                Sitemap |Feedback & Support | Terms of Use | FAQ | About element14                 **************************Disclaimer**************************
The contents of this e-mail and any file transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed.
The content may also contain legal, professional or other privileged information.
If you received this e-mail in error, please destroy it immediately.
You should not copy or use it for any purpose nor disclose its contents to any other person.
The views stated herein do not necessarily represent the view of the Company.
Please ensure you have adequate virus protection before you open or detach any documents from this transmission.
The Company does not accept any liability for viruses.
Premier Farnell plc
150 Armley Road
Leeds
LS12 2QQ

Telephone +44 (0) 870 129 8608

Fax +44 (0) 870 129 8610
Registered in England

Company Number 876412

Registered Office: Farnell House, Forge Lane, Leeds LS12 2NE
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Former Member over 12 years ago in reply to Former Member
hey bro,the pins of tssp6p38 is very small and weird,may i know how to connect it to breadboard?i need the answer urgently,please answer me as soon as possible.if it need any adapter,is element 14 selling any adapter which suitable for this receiver?

From: khangzing@hotmail.com
To: communities@element14.com
Subject: RE: - Re: symbols for Eagle CAD
Date: Tue, 23 Apr 2013 22:18:00 +0800

i forgotten,long time ago,the 1 i give u,u can make the symbol right?and for the apr9600,i didnt receive anything,the file u sent has been removed,please check and see-.-

Date: Tue, 23 Apr 2013 14:13:22 +0000
From: messages@element14.com
To: khangzing@hotmail.com
Subject: - Re: symbols for Eagle CAD











    Re: symbols for Eagle CAD

    created by ALF_Z in Forums - View the full discussion

where do you get this pdf, URL?
I always get the corrupted data sheet <http://www.vishay.com/docs/82475/tssp6p38.pdf>
The link of farnell online http://de.farnell.com/vishay/tssp6p38tr/ir-sensor-smd-f-naeherung-38khz/dp/2251451?Ntt=TSSP6P38 also.

    Reply to this message by going to element14
     Start a new discussion in Forums at element14
To unsubscribe from ALL email notifications from element14 Community, Click Here

To learn how to modify your email preferences, Click Here
                                                                Sitemap |Feedback & Support | Terms of Use | FAQ | About element14                 **************************Disclaimer**************************

The contents of this e-mail and any file transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed.
The content may also contain legal, professional or other privileged information.
If you received this e-mail in error, please destroy it immediately.
You should not copy or use it for any purpose nor disclose its contents to any other person.
The views stated herein do not necessarily represent the view of the Company.

Please ensure you have adequate virus protection before you open or detach any documents from this transmission.
The Company does not accept any liability for viruses.

Premier Farnell plc
150 Armley Road
Leeds
LS12 2QQ

Telephone +44 (0) 870 129 8608

Fax +44 (0) 870 129 8610

Registered in England

Company Number 876412

Registered Office: Farnell House, Forge Lane, Leeds LS12 2NE
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Former Member over 12 years ago in reply to Former Member
please provide me the pictures and steps that show how to connect the tssp6p38 on breadboard.i need it urgently,please reply as soon as possible. and also,the tsal6200 and tssp6p38 how to connect this 2,please provide me the circuit diagram thanks.

From: khangzing@hotmail.com
To: communities@element14.com
Subject: RE: - Re: symbols for Eagle CAD
Date: Wed, 24 Apr 2013 09:09:34 +0800

hey bro,the pins of tssp6p38 is very small and weird,may i know how to connect it to breadboard?i need the answer urgently,please answer me as soon as possible.if it need any adapter,is element 14 selling any adapter which suitable for this receiver?

From: khangzing@hotmail.com
To: communities@element14.com
Subject: RE: - Re: symbols for Eagle CAD
Date: Tue, 23 Apr 2013 22:18:00 +0800

i forgotten,long time ago,the 1 i give u,u can make the symbol right?and for the apr9600,i didnt receive anything,the file u sent has been removed,please check and see-.-

Date: Tue, 23 Apr 2013 14:13:22 +0000
From: messages@element14.com
To: khangzing@hotmail.com
Subject: - Re: symbols for Eagle CAD











    Re: symbols for Eagle CAD

    created by ALF_Z in Forums - View the full discussion

where do you get this pdf, URL?
I always get the corrupted data sheet <http://www.vishay.com/docs/82475/tssp6p38.pdf>
The link of farnell online http://de.farnell.com/vishay/tssp6p38tr/ir-sensor-smd-f-naeherung-38khz/dp/2251451?Ntt=TSSP6P38 also.

    Reply to this message by going to element14
     Start a new discussion in Forums at element14
To unsubscribe from ALL email notifications from element14 Community, Click Here

To learn how to modify your email preferences, Click Here
                                                                Sitemap |Feedback & Support | Terms of Use | FAQ | About element14                 **************************Disclaimer**************************

The contents of this e-mail and any file transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed.
The content may also contain legal, professional or other privileged information.
If you received this e-mail in error, please destroy it immediately.
You should not copy or use it for any purpose nor disclose its contents to any other person.
The views stated herein do not necessarily represent the view of the Company.

Please ensure you have adequate virus protection before you open or detach any documents from this transmission.
The Company does not accept any liability for viruses.

Premier Farnell plc
150 Armley Road
Leeds
LS12 2QQ

Telephone +44 (0) 870 129 8608

Fax +44 (0) 870 129 8610

Registered in England

Company Number 876412

Registered Office: Farnell House, Forge Lane, Leeds LS12 2NE
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Former Member over 12 years ago in reply to Former Member
please provide me the pictures and steps that show how to connect the tssp6p38 on breadboard.i need it urgently,please reply as soon as possible. and also,the tsal6200 and tssp6p38 how to connect this 2,please provide me the circuit diagram thanks.

From: khangzing@hotmail.com
To: communities@element14.com
Subject: RE: - Re: symbols for Eagle CAD
Date: Wed, 24 Apr 2013 09:09:34 +0800

hey bro,the pins of tssp6p38 is very small and weird,may i know how to connect it to breadboard?i need the answer urgently,please answer me as soon as possible.if it need any adapter,is element 14 selling any adapter which suitable for this receiver?

From: khangzing@hotmail.com
To: communities@element14.com
Subject: RE: - Re: symbols for Eagle CAD
Date: Tue, 23 Apr 2013 22:18:00 +0800

i forgotten,long time ago,the 1 i give u,u can make the symbol right?and for the apr9600,i didnt receive anything,the file u sent has been removed,please check and see-.-

Date: Tue, 23 Apr 2013 14:13:22 +0000
From: messages@element14.com
To: khangzing@hotmail.com
Subject: - Re: symbols for Eagle CAD











    Re: symbols for Eagle CAD

    created by ALF_Z in Forums - View the full discussion

where do you get this pdf, URL?
I always get the corrupted data sheet <http://www.vishay.com/docs/82475/tssp6p38.pdf>
The link of farnell online http://de.farnell.com/vishay/tssp6p38tr/ir-sensor-smd-f-naeherung-38khz/dp/2251451?Ntt=TSSP6P38 also.

    Reply to this message by going to element14
     Start a new discussion in Forums at element14
To unsubscribe from ALL email notifications from element14 Community, Click Here

To learn how to modify your email preferences, Click Here
                                                                Sitemap |Feedback & Support | Terms of Use | FAQ | About element14                 **************************Disclaimer**************************

The contents of this e-mail and any file transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed.
The content may also contain legal, professional or other privileged information.
If you received this e-mail in error, please destroy it immediately.
You should not copy or use it for any purpose nor disclose its contents to any other person.
The views stated herein do not necessarily represent the view of the Company.

Please ensure you have adequate virus protection before you open or detach any documents from this transmission.
The Company does not accept any liability for viruses.

Premier Farnell plc
150 Armley Road
Leeds
LS12 2QQ

Telephone +44 (0) 870 129 8608

Fax +44 (0) 870 129 8610

Registered in England

Company Number 876412

Registered Office: Farnell House, Forge Lane, Leeds LS12 2NE
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data