This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Circuit Studio 1.3.0 outputting gerbers

Hi,

I'm using Circuit Studio 1.3.0 and when outputting gerbers the selected "mechanical layer to include on all layers" isn't getting added to any layers. I've tried a board outline on Mechanical 1 and Mechanical 2 and this is not being applied when the Gerbers are generated. Is this a known issue?

Dave

Parents

Former Member over 8 years ago

you don't really want to include the outline on all the gerber layers anyway, i know many do but they just need to get removed by the fabricator lest they leave copper hairs around the outline, just provide the outline on its own layer and you will save them some work, and put only the outline on the outline layer, registration is done by other means
why is it you want to include that ?

however something slightly useful on all layers might be a title block or part number but that will be also one of the first things to go when they make the working films
Cancel
Vote Up 0 Vote Down

Cancel

Reply

Former Member over 8 years ago

you don't really want to include the outline on all the gerber layers anyway, i know many do but they just need to get removed by the fabricator lest they leave copper hairs around the outline, just provide the outline on its own layer and you will save them some work, and put only the outline on the outline layer, registration is done by other means
why is it you want to include that ?

however something slightly useful on all layers might be a title block or part number but that will be also one of the first things to go when they make the working films
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data