Hi everyone, this is my Raspberry pi development box that I pleced together to do all my Rpi projects.
The box is a standard 5 to 24 division utility box that you can get a any home depo for 7 bucks.
Put the holes for the Rpi and install the Rpi inside with some minos circuitry for GPIO connections and a fan(Very important) to cool everithing down and you have the perfect chassy for a project box.
| FN | GPIO# | PIN# | GPIO# | FN | |
| SDA | GPIO2 | 17 | 18 | GPIO14 | TXD |
| SCL | GPIO3 | 15 | 16 | GPIO15 | RXD |
| GPCLK0 | GPIO4 | 13 | 14 | GPIO17 | |
| CE0 | GPIO7 | 11 | 12 | GPIO18 | PCM_CLK |
| CE1 | GPIO8 | 9 | 10 | GPIO22 | |
| MISO | GPIO9 | 7 | 8 | GPIO23 | |
| MOSI | GPIO10 | 5 | 6 | GPIO24 | |
| SCLK | GPIO11 | 3 | 4 | GPIO25 | |
| GND | 1 | 2 | GPIO27 | PCM_DOUT | |
Place a protoboard and pocket size multimeter and Bamm, there is a development box for all your needs.
Good thing the Rpi is powered by 5v so you can install a battery pack and presto Rpi instapower.
I allready installed Adafruit weeze that works the best.
Next are the pheripherals, I have yet to get a wifi for the Rpi but I just got a new wireless keyboard with mouse pad wich is very cool and very small, now I have to get used to it.
Next up Ill get the mini wireless for the usb, I allready have a 4 port usb hub for flash memories.
