Featured Articles
Announcing Pi
Technical Specifications
Raspberry Pi FAQs
Win a Pi
Raspberry Pi Wishlist
Actions
Forum Thread Details
  • Replies 32 replies
  • Subscribers 686 subscribers
  • Views 3937 views
  • Users 0 members are here
Related

RPI 3 nousb

Former Member

I recently got a pi 3 with the 7" touch screen. I set it up with berryboot and installed jessie. I got to were I needed to use a keyboard and that is when I found out the usb ports didn't work.

I went through the following link to try to fix it but nothing there helped.

https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=53832

 

I've tried keyboards and mice from working linux computers, I even tried a powered usb hub and nothing. I've tried running without the touch screen(via ssh) nothing is recognized.

I've tried power supplies from my other pi's with change. Do I need to post dmesg output? Is it possible I got a bum Pi?

-dan

Parents

  • Here's the dmesg output. I couldn't figure out how to copy just the errors but I managed to copy the whole listing.

     

    pi@raspberrypi:~ $ dmesg

    [    0.000000] Booting Linux on physical CPU 0x0

    [    0.000000] Initializing cgroup subsys cpuset

    [    0.000000] Initializing cgroup subsys cpu

    [    0.000000] Initializing cgroup subsys cpuacct

    [    0.000000] Linux version 4.1.19-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #858 SMP Tue Mar 15 15:56:00 GMT 2016

    [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d

    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

    [    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2

    [    0.000000] cma: Reserved 8 MiB at 0x3a400000

    [    0.000000] Memory policy: Data cache writealloc

    [    0.000000] On node 0 totalpages: 241664

    [    0.000000] free_area_init_node: node 0, pgdat 80880fc0, node_mem_map b9bb4000

    [    0.000000]   Normal zone: 2124 pages used for memmap

    [    0.000000]   Normal zone: 0 pages reserved

    [    0.000000]   Normal zone: 241664 pages, LIFO batch:31

    [    0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)

    [    0.000000] [bcm2709_smp_init_cpus] ncores=4

    [    0.000000] PERCPU: Embedded 12 pages/cpu @bafb0000 s20416 r8192 d20544 u49152

    [    0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096

    [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540

    [    0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480 bcm2709.boardrev=0xa22082 bcm2709.serial=0x10b7a724 smsc95xx.macaddr=B8:27:EB:B7:A7:24 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait

    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

    [    0.000000] Memory: 939376K/966656K available (6064K kernel code, 534K rwdata, 1664K rodata, 444K init, 757K bss, 19088K reserved, 8192K cma-reserved)

    [    0.000000] Virtual kernel memory layout:

        vector  : 0xffff0000 - 0xffff1000   (   4 kB)

        fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)

        vmalloc : 0xbb800000 - 0xff000000   (1080 MB)

        lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)

        modules : 0x7f000000 - 0x80000000   (  16 MB)

          .text : 0x80008000 - 0x807945f0   (7730 kB)

          .init : 0x80795000 - 0x80804000   ( 444 kB)

          .data : 0x80804000 - 0x80889b10   ( 535 kB)

           .bss : 0x8088c000 - 0x809497dc   ( 758 kB)

    [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

    [    0.000000] Hierarchical RCU implementation.

    [    0.000000] Additional per-CPU info printed with stalls.

    [    0.000000] NR_IRQS:608

    [    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).

    [    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns

    [    0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns

    [    0.000026] Switching to timer-based delay loop, resolution 52ns

    [    0.000248] Console: colour dummy device 80x30

    [    0.001292] console [tty1] enabled

    [    0.001346] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)

    [    0.001413] pid_max: default: 32768 minimum: 301

    [    0.001734] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

    [    0.001777] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

    [    0.002764] Initializing cgroup subsys blkio

    [    0.002813] Initializing cgroup subsys memory

    [    0.002860] Initializing cgroup subsys devices

    [    0.002904] Initializing cgroup subsys freezer

    [    0.002954] Initializing cgroup subsys net_cls

    [    0.003023] CPU: Testing write buffer coherency: ok

    [    0.003112] ftrace: allocating 20313 entries in 60 pages

    [    0.048751] CPU0: update cpu_capacity 1024

    [    0.048816] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

    [    0.048851] [bcm2709_smp_prepare_cpus] enter

    [    0.049005] Setting up static identity map for 0x8240 - 0x8274

    [    0.050782] [bcm2709_boot_secondary] cpu:1 started (0) 17

    [    0.050986] [bcm2709_secondary_init] enter cpu:1

    [    0.051028] CPU1: update cpu_capacity 1024

    [    0.051034] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

    [    0.051420] [bcm2709_boot_secondary] cpu:2 started (0) 17

    [    0.051586] [bcm2709_secondary_init] enter cpu:2

    [    0.051607] CPU2: update cpu_capacity 1024

    [    0.051613] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

    [    0.051980] [bcm2709_boot_secondary] cpu:3 started (0) 18

    [    0.052111] [bcm2709_secondary_init] enter cpu:3

    [    0.052132] CPU3: update cpu_capacity 1024

    [    0.052138] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

    [    0.052201] Brought up 4 CPUs

    [    0.052299] SMP: Total of 4 processors activated (153.60 BogoMIPS).

    [    0.052329] CPU: All CPU(s) started in HYP mode.

    [    0.052355] CPU: Virtualization extensions available.

    [    0.053044] devtmpfs: initialized

    [    0.071862] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4

    [    0.072130] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

    [    0.072982] pinctrl core: initialized pinctrl subsystem

    [    0.073532] NET: Registered protocol family 16

    [    0.078653] DMA: preallocated 4096 KiB pool for atomic coherent allocations

    [    0.079626] bcm2709.uart_clock = 48000000

    [    0.083898] bcm2709: Mini UART enabled

    [    0.083965] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

    [    0.084012] hw-breakpoint: maximum watchpoint size is 8 bytes.

    [    0.084188] Serial: AMBA PL011 UART driver

    [    0.084258] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe

    [    0.084458] bcm2835-mbox 3f00b880.mailbox: mailbox enabled

    [    0.149483] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35

    [    0.149554] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)

    [    0.150142] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver

    [    0.150178] bcm2708-dmaengine 3f007000.dma: dma_debug:0

    [    0.150761] SCSI subsystem initialized

    [    0.150964] usbcore: registered new interface driver usbfs

    [    0.151071] usbcore: registered new interface driver hub

    [    0.151189] usbcore: registered new device driver usb

    [    0.151750] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-15 14:47

    [    0.178847] Switched to clocksource arch_sys_counter

    [    0.220293] FS-Cache: Loaded

    [    0.220575] CacheFiles: Loaded

    [    0.229919] NET: Registered protocol family 2

    [    0.230881] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

    [    0.231022] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

    [    0.231232] TCP: Hash tables configured (established 8192 bind 8192)

    [    0.231347] UDP hash table entries: 512 (order: 2, 16384 bytes)

    [    0.231416] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

    [    0.231740] NET: Registered protocol family 1

    [    0.232071] RPC: Registered named UNIX socket transport module.

    [    0.232104] RPC: Registered udp transport module.

    [    0.232132] RPC: Registered tcp transport module.

    [    0.232159] RPC: Registered tcp NFSv4.1 backchannel transport module.

    [    0.233139] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available

    [    0.234210] futex hash table entries: 1024 (order: 4, 65536 bytes)

    [    0.247619] VFS: Disk quotas dquot_6.6.0

    [    0.247952] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

    [    0.250054] FS-Cache: Netfs 'nfs' registered for caching

    [    0.250984] NFS: Registering the id_resolver key type

    [    0.251051] Key type id_resolver registered

    [    0.251080] Key type id_legacy registered

    [    0.253141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

    [    0.253301] io scheduler noop registered

    [    0.253341] io scheduler deadline registered (default)

    [    0.253636] io scheduler cfq registered

    [    0.255931] BCM2708FB: allocated DMA memory fa800000

    [    0.255978] BCM2708FB: allocated DMA channel 0 @ f3007000

    [    0.262569] Console: switching to colour frame buffer device 100x30

    [    0.268097] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled

    [    0.271309] console [ttyS0] disabled

    [    0.272996] 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 29, base_baud = 50000000) is a 16550

    [    1.471429] console [ttyS0] enabled

    [    1.479713] vc-cma: Videocore CMA driver

    [    1.487782] vc-cma: vc_cma_base      = 0x00000000

    [    1.497193] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)

    [    1.507700] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)

    [    1.518296] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)

    [    1.544732] brd: module loaded

    [    1.558270] loop: module loaded

    [    1.565835] vchiq: vchiq_init_state: slot_zero = 0xba880000, is_master = 0

    [    1.580203] Loading iSCSI transport class v2.0-870.

    [    1.590457] usbcore: registered new interface driver smsc95xx

    [    1.601518] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

    [    1.812823] Core Release: 2.80a

    [    1.819620] Setting default values for core params

    [    1.829093] Finished setting default values for core params

    [    2.040132] Using Buffer DMA mode

    [    2.047135] Periodic Transfer Interrupt Enhancement - disabled

    [    2.058301] Multiprocessor Interrupt Enhancement - disabled

    [    2.069060] OTG VER PARAM: 0, OTG VER FLAG: 0

    [    2.077859] Dedicated Tx FIFOs mode

    [    2.085582] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba814000 dma = 0xfa814000 len=9024

    [    2.105141] FIQ FSM acceleration enabled for :

    Non-periodic Split Transactions

    Periodic Split Transactions

    High-Speed Isochronous Endpoints

    [    2.139039] dwc_otg: Microframe scheduler enabled

    [    2.139093] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80417288

    [    2.150401] WARN::hcd_init_fiq:413: FIQ ASM at 0x804175f8 length 36

    [    2.162292] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb89c000

    [    2.173802] dwc_otg 3f980000.usb: DWC OTG Controller

    [    2.183605] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1

    [    2.197206] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000

    [    2.208010] Init: Port Power? op_state=1

    [    2.216063] Init: Power Port (0)

    [    2.223115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

    [    2.235827] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

    [    2.249236] usb usb1: Product: DWC OTG Controller

    [    2.258512] usb usb1: Manufacturer: Linux 4.1.19-v7+ dwc_otg_hcd

    [    2.269934] usb usb1: SerialNumber: 3f980000.usb

    [    2.279745] hub 1-0:1.0: USB hub found

    [    2.287470] hub 1-0:1.0: 1 port detected

    [    2.295822] dwc_otg: FIQ enabled

    [    2.295832] dwc_otg: NAK holdoff enabled

    [    2.295840] dwc_otg: FIQ split-transaction FSM enabled

    [    2.295871] Module dwc_common_port init

    [    2.296130] usbcore: registered new interface driver usb-storage

    [    2.307677] mousedev: PS/2 mouse device common for all mice

    [    2.319021] bcm2835-cpufreq: min=600000 max=1200000

    [    2.328814] sdhci: Secure Digital Host Controller Interface driver

    [    2.340458] sdhci: Copyright(c) Pierre Ossman

    [    2.349336] sdhost: log_buf @ ba813000 (fa813000)

    [    2.428878] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)

    [    2.461683] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0

    [    2.472738] mmc-bcm2835 3f300000.mmc: DMA channel allocated

    [    2.488932] Indeed it is in host mode hprt0 = 00021501

    [    2.499746] mmc0: host does not support reading read-only switch, assuming write-enable

    [    2.517253] mmc0: new high speed SDHC card at address 59b4

    [    2.518964] sdhci-pltfm: SDHCI platform and OF driver helper

    [    2.519332] ledtrig-cpu: registered to indicate activity on CPUs

    [    2.519454] hidraw: raw HID events driver (C) Jiri Kosina

    [    2.519642] usbcore: registered new interface driver usbhid

    [    2.519645] usbhid: USB HID core driver

    [    2.520049] Initializing XFRM netlink socket

    [    2.520074] NET: Registered protocol family 17

    [    2.520182] Key type dns_resolver registered

    [    2.520610] Registering SWP/SWPB emulation handler

    [    2.559401] registered taskstats version 1

    [    2.559581] vc-sm: Videocore shared memory driver

    [    2.559590] [vc_sm_connected_init]: start

    [    2.560770] [vc_sm_connected_init]: end - returning 0

    [    2.562088] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2

    [    2.665718] Waiting for root device /dev/mmcblk0p7...

    [    2.665935] mmcblk0: mmc0:59b4 NCard 7.48 GiB

    [    2.669939]  mmcblk0: p1 p2 < p5 p6 p7 >

    [    2.687522] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

    [    2.688871] usb 1-1: new high-speed USB device number 2 using dwc_otg

    [    2.689002] Indeed it is in host mode hprt0 = 00001101

    [    2.689082] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

    [    2.690629] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

    [    2.693407] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

    [    2.758741] EXT4-fs (mmcblk0p7): INFO: recovery required on readonly filesystem

    [    2.772173] EXT4-fs (mmcblk0p7): write access will be enabled during recovery

    [    2.783770] mmc1: new high speed SDIO card at address 0001

    [    2.889145] usb 1-1: New USB device found, idVendor=0424, idProduct=9514

    [    2.901639] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

    [    2.915491] hub 1-1:1.0: USB hub found

    [    2.923240] hub 1-1:1.0: 5 ports detected

    [    3.208885] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

    [    3.319124] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00

    [    3.331945] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

    [    3.348188] smsc95xx v1.0.4

    [    3.411904] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b7:a7:24

    [    5.170328] EXT4-fs (mmcblk0p7): orphan cleanup on readonly fs

    [    5.181938] EXT4-fs (mmcblk0p7): 1 orphan inode deleted

    [    5.192195] EXT4-fs (mmcblk0p7): recovery complete

    [    5.513869] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)

    [    5.528810] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.

    [    5.553300] devtmpfs: mounted

    [    5.560555] Freeing unused kernel memory: 444K (80795000 - 80804000)

    [    5.908700] random: systemd urandom read with 68 bits of entropy available

    [    5.925167] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)

    [    5.950989] systemd[1]: Detected architecture 'arm'.

    [    6.121309] NET: Registered protocol family 10

    [    6.131734] systemd[1]: Inserted module 'ipv6'

    [    6.143814] systemd[1]: Set hostname to <raspberrypi>.

    [    6.531286] systemd[1]: Expecting device dev-ttyS0.device...

    [    6.544947] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.

    [    6.559596] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

    [    6.573933] systemd[1]: Starting Remote File Systems (Pre).

    [    6.587167] systemd[1]: Reached target Remote File Systems (Pre).

    [    6.599102] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.

    [    6.617868] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

    [    6.637245] systemd[1]: Starting Encrypted Volumes.

    [    6.649601] systemd[1]: Reached target Encrypted Volumes.

    [    6.660454] systemd[1]: Starting Swap.

    [    6.670729] systemd[1]: Reached target Swap.

    [    6.679588] systemd[1]: Expecting device dev-mmcblk0p6.device...

    [    6.693376] systemd[1]: Starting Root Slice.

    [    6.704429] systemd[1]: Created slice Root Slice.

    [    6.714012] systemd[1]: Starting User and Session Slice.

    [    6.726927] systemd[1]: Created slice User and Session Slice.

    [    6.738268] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.

    [    6.753344] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.

    [    6.766675] systemd[1]: Starting Delayed Shutdown Socket.

    [    6.779758] systemd[1]: Listening on Delayed Shutdown Socket.

    [    6.791082] systemd[1]: Starting Journal Socket (/dev/log).

    [    6.804300] systemd[1]: Listening on Journal Socket (/dev/log).

    [    6.815824] systemd[1]: Starting udev Control Socket.

    [    6.827925] systemd[1]: Listening on udev Control Socket.

    [    6.838533] systemd[1]: Starting udev Kernel Socket.

    [    6.850492] systemd[1]: Listening on udev Kernel Socket.

    [    6.860986] systemd[1]: Starting Journal Socket.

    [    6.872437] systemd[1]: Listening on Journal Socket.

    [    6.882399] systemd[1]: Starting System Slice.

    [    6.893583] systemd[1]: Created slice System Slice.

    [    6.903385] systemd[1]: Starting File System Check on Root Device...

    [    6.919901] systemd[1]: Starting system-systemd\x2dfsck.slice.

    [    6.934115] systemd[1]: Created slice system-systemd\x2dfsck.slice.

    [    6.946302] systemd[1]: Starting system-autologin.slice.

    [    6.959356] systemd[1]: Created slice system-autologin.slice.

    [    6.970620] systemd[1]: Starting system-serial\x2dgetty.slice.

    [    6.984340] systemd[1]: Created slice system-serial\x2dgetty.slice.

    [    6.996516] systemd[1]: Starting Increase datagram queue length...

    [    7.012732] systemd[1]: Starting Restore / save the current clock...

    [    7.033046] systemd[1]: Mounting POSIX Message Queue File System...

    [    7.050265] systemd[1]: Starting Create list of required static device nodes for the current kernel...

    [    7.074139] systemd[1]: Starting udev Coldplug all Devices...

    [    7.131285] systemd[1]: Started Set Up Additional Binary Formats.

    [    7.144193] systemd[1]: Mounting Debug File System...

    [    7.189375] systemd[1]: Starting Load Kernel Modules...

    [    7.208235] systemd[1]: Mounted Huge Pages File System.

    [    7.219177] systemd[1]: Starting Slices.

    [    7.230021] systemd[1]: Reached target Slices.

    [    7.243491] systemd[1]: Mounted Debug File System.

    [    7.255679] systemd[1]: Mounted POSIX Message Queue File System.

    [    7.270713] systemd[1]: Started Increase datagram queue length.

    [    7.311306] fuse init (API version 7.23)

    [    7.321986] systemd[1]: Started Restore / save the current clock.

    [    7.337691] systemd[1]: Started Create list of required static device nodes for the current kernel.

    [    7.361974] systemd[1]: Time has been changed

    [    7.378156] i2c /dev entries driver

    [    7.388297] systemd[1]: Started File System Check on Root Device.

    [    7.403977] systemd[1]: Started Load Kernel Modules.

    [    7.417519] systemd[1]: Started udev Coldplug all Devices.

    [    7.567132] systemd[1]: Starting Apply Kernel Variables...

    [    7.583270] systemd[1]: Mounting Configuration File System...

    [    7.599531] systemd[1]: Mounting FUSE Control File System...

    [    7.605008] systemd[1]: Starting Create Static Device Nodes in /dev...

    [    7.610628] systemd[1]: Starting Syslog Socket.

    [    7.613885] systemd[1]: Listening on Syslog Socket.

    [    7.614051] systemd[1]: Starting Journal Service...

    [    7.621762] systemd[1]: Started Journal Service.

    [    7.773163] systemd-udevd[111]: starting version 215

    [    8.142179] rpi-ft5406 rpi_ft5406: Probing device

    [    8.142600] input: FT5406 memory based driver as /devices/virtual/input/input0

    [    8.469205] EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)

    [    8.628099] cfg80211: Calling CRDA to update world regulatory domain

    [    8.719024] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24

    [    8.719885] usbcore: registered new interface driver brcmfmac

    [    8.966409] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c

    [    8.992664] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code

    [    9.093632] bcm2835-rng 3f104000.rng: hwrng registered

    [    9.094189] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000

    [    9.392909] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code

    [    9.392935] cfg80211: World regulatory domain updated:

    [    9.392944] cfg80211:  DFS Master region: unset

    [    9.392953] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)

    [    9.392967] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)

    [    9.392980] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)

    [    9.392992] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)

    9.393007 cfg80211(5170000 KHz 5250000 KHz 80000 KHz  160000160000 KHz AUTO(N/A 2000 mBm(N/A

    9.393021 cfg80211(5250000 KHz 5330000 KHz 80000 KHz  160000160000 KHz AUTO(N/A 2000 mBm(0 s

    9.393034 cfg80211(5490000 KHz 5730000 KHz  160000160000 KHz(N/A 2000 mBm(0 s

    [    9.393046] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)

    [    9.393058] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)

    [    9.518076] systemd-journald[108]: Received request to flush runtime journal from PID 1

    [    9.868407] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists

    [    9.868430] brcmfmac: brcmf_add_if: ignore IF event

    [    9.873886] brcmfmac: power management disabled

    [   10.606396] uart-pl011 3f201000.uart: no DMA platform data

    [   10.994626] Adding 102396k swap on /var/swap.  Priority:-1 extents:1 across:102396k SSFS

    [   11.319062] random: nonblocking pool is initialized

    [   11.630989] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup

    [   11.631218] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

    [   13.250045] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

    [   13.253814] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1

    [   15.197767] Bluetooth: Core ver 2.20

    [   15.197851] NET: Registered protocol family 31

    [   15.197861] Bluetooth: HCI device and connection manager initialized

    [   15.197884] Bluetooth: HCI socket layer initialized

    [   15.197901] Bluetooth: L2CAP socket layer initialized

    [   15.197939] Bluetooth: SCO socket layer initialized

    [   15.214699] Bluetooth: HCI UART driver ver 2.3

    [   15.214720] Bluetooth: HCI UART protocol H4 registered

    [   15.214730] Bluetooth: HCI UART protocol Three-wire (H5) registered

    [   15.214740] Bluetooth: HCI UART protocol BCM registered

    [   15.553447] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

    [   15.553466] Bluetooth: BNEP filters: protocol multicast

    [   15.553489] Bluetooth: BNEP socket layer initialized

    [   25.129810] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)

    pi@raspberrypi:~ $

Reply

  • Here's the dmesg output. I couldn't figure out how to copy just the errors but I managed to copy the whole listing.

     

    pi@raspberrypi:~ $ dmesg

    [    0.000000] Booting Linux on physical CPU 0x0

    [    0.000000] Initializing cgroup subsys cpuset

    [    0.000000] Initializing cgroup subsys cpu

    [    0.000000] Initializing cgroup subsys cpuacct

    [    0.000000] Linux version 4.1.19-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #858 SMP Tue Mar 15 15:56:00 GMT 2016

    [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d

    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

    [    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2

    [    0.000000] cma: Reserved 8 MiB at 0x3a400000

    [    0.000000] Memory policy: Data cache writealloc

    [    0.000000] On node 0 totalpages: 241664

    [    0.000000] free_area_init_node: node 0, pgdat 80880fc0, node_mem_map b9bb4000

    [    0.000000]   Normal zone: 2124 pages used for memmap

    [    0.000000]   Normal zone: 0 pages reserved

    [    0.000000]   Normal zone: 241664 pages, LIFO batch:31

    [    0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)

    [    0.000000] [bcm2709_smp_init_cpus] ncores=4

    [    0.000000] PERCPU: Embedded 12 pages/cpu @bafb0000 s20416 r8192 d20544 u49152

    [    0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096

    [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540

    [    0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480 bcm2709.boardrev=0xa22082 bcm2709.serial=0x10b7a724 smsc95xx.macaddr=B8:27:EB:B7:A7:24 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait

    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

    [    0.000000] Memory: 939376K/966656K available (6064K kernel code, 534K rwdata, 1664K rodata, 444K init, 757K bss, 19088K reserved, 8192K cma-reserved)

    [    0.000000] Virtual kernel memory layout:

        vector  : 0xffff0000 - 0xffff1000   (   4 kB)

        fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)

        vmalloc : 0xbb800000 - 0xff000000   (1080 MB)

        lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)

        modules : 0x7f000000 - 0x80000000   (  16 MB)

          .text : 0x80008000 - 0x807945f0   (7730 kB)

          .init : 0x80795000 - 0x80804000   ( 444 kB)

          .data : 0x80804000 - 0x80889b10   ( 535 kB)

           .bss : 0x8088c000 - 0x809497dc   ( 758 kB)

    [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

    [    0.000000] Hierarchical RCU implementation.

    [    0.000000] Additional per-CPU info printed with stalls.

    [    0.000000] NR_IRQS:608

    [    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).

    [    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns

    [    0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns

    [    0.000026] Switching to timer-based delay loop, resolution 52ns

    [    0.000248] Console: colour dummy device 80x30

    [    0.001292] console [tty1] enabled

    [    0.001346] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)

    [    0.001413] pid_max: default: 32768 minimum: 301

    [    0.001734] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

    [    0.001777] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

    [    0.002764] Initializing cgroup subsys blkio

    [    0.002813] Initializing cgroup subsys memory

    [    0.002860] Initializing cgroup subsys devices

    [    0.002904] Initializing cgroup subsys freezer

    [    0.002954] Initializing cgroup subsys net_cls

    [    0.003023] CPU: Testing write buffer coherency: ok

    [    0.003112] ftrace: allocating 20313 entries in 60 pages

    [    0.048751] CPU0: update cpu_capacity 1024

    [    0.048816] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

    [    0.048851] [bcm2709_smp_prepare_cpus] enter

    [    0.049005] Setting up static identity map for 0x8240 - 0x8274

    [    0.050782] [bcm2709_boot_secondary] cpu:1 started (0) 17

    [    0.050986] [bcm2709_secondary_init] enter cpu:1

    [    0.051028] CPU1: update cpu_capacity 1024

    [    0.051034] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

    [    0.051420] [bcm2709_boot_secondary] cpu:2 started (0) 17

    [    0.051586] [bcm2709_secondary_init] enter cpu:2

    [    0.051607] CPU2: update cpu_capacity 1024

    [    0.051613] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

    [    0.051980] [bcm2709_boot_secondary] cpu:3 started (0) 18

    [    0.052111] [bcm2709_secondary_init] enter cpu:3

    [    0.052132] CPU3: update cpu_capacity 1024

    [    0.052138] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

    [    0.052201] Brought up 4 CPUs

    [    0.052299] SMP: Total of 4 processors activated (153.60 BogoMIPS).

    [    0.052329] CPU: All CPU(s) started in HYP mode.

    [    0.052355] CPU: Virtualization extensions available.

    [    0.053044] devtmpfs: initialized

    [    0.071862] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4

    [    0.072130] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

    [    0.072982] pinctrl core: initialized pinctrl subsystem

    [    0.073532] NET: Registered protocol family 16

    [    0.078653] DMA: preallocated 4096 KiB pool for atomic coherent allocations

    [    0.079626] bcm2709.uart_clock = 48000000

    [    0.083898] bcm2709: Mini UART enabled

    [    0.083965] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

    [    0.084012] hw-breakpoint: maximum watchpoint size is 8 bytes.

    [    0.084188] Serial: AMBA PL011 UART driver

    [    0.084258] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe

    [    0.084458] bcm2835-mbox 3f00b880.mailbox: mailbox enabled

    [    0.149483] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35

    [    0.149554] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)

    [    0.150142] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver

    [    0.150178] bcm2708-dmaengine 3f007000.dma: dma_debug:0

    [    0.150761] SCSI subsystem initialized

    [    0.150964] usbcore: registered new interface driver usbfs

    [    0.151071] usbcore: registered new interface driver hub

    [    0.151189] usbcore: registered new device driver usb

    [    0.151750] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-15 14:47

    [    0.178847] Switched to clocksource arch_sys_counter

    [    0.220293] FS-Cache: Loaded

    [    0.220575] CacheFiles: Loaded

    [    0.229919] NET: Registered protocol family 2

    [    0.230881] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

    [    0.231022] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

    [    0.231232] TCP: Hash tables configured (established 8192 bind 8192)

    [    0.231347] UDP hash table entries: 512 (order: 2, 16384 bytes)

    [    0.231416] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

    [    0.231740] NET: Registered protocol family 1

    [    0.232071] RPC: Registered named UNIX socket transport module.

    [    0.232104] RPC: Registered udp transport module.

    [    0.232132] RPC: Registered tcp transport module.

    [    0.232159] RPC: Registered tcp NFSv4.1 backchannel transport module.

    [    0.233139] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available

    [    0.234210] futex hash table entries: 1024 (order: 4, 65536 bytes)

    [    0.247619] VFS: Disk quotas dquot_6.6.0

    [    0.247952] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

    [    0.250054] FS-Cache: Netfs 'nfs' registered for caching

    [    0.250984] NFS: Registering the id_resolver key type

    [    0.251051] Key type id_resolver registered

    [    0.251080] Key type id_legacy registered

    [    0.253141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

    [    0.253301] io scheduler noop registered

    [    0.253341] io scheduler deadline registered (default)

    [    0.253636] io scheduler cfq registered

    [    0.255931] BCM2708FB: allocated DMA memory fa800000

    [    0.255978] BCM2708FB: allocated DMA channel 0 @ f3007000

    [    0.262569] Console: switching to colour frame buffer device 100x30

    [    0.268097] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled

    [    0.271309] console [ttyS0] disabled

    [    0.272996] 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 29, base_baud = 50000000) is a 16550

    [    1.471429] console [ttyS0] enabled

    [    1.479713] vc-cma: Videocore CMA driver

    [    1.487782] vc-cma: vc_cma_base      = 0x00000000

    [    1.497193] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)

    [    1.507700] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)

    [    1.518296] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)

    [    1.544732] brd: module loaded

    [    1.558270] loop: module loaded

    [    1.565835] vchiq: vchiq_init_state: slot_zero = 0xba880000, is_master = 0

    [    1.580203] Loading iSCSI transport class v2.0-870.

    [    1.590457] usbcore: registered new interface driver smsc95xx

    [    1.601518] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

    [    1.812823] Core Release: 2.80a

    [    1.819620] Setting default values for core params

    [    1.829093] Finished setting default values for core params

    [    2.040132] Using Buffer DMA mode

    [    2.047135] Periodic Transfer Interrupt Enhancement - disabled

    [    2.058301] Multiprocessor Interrupt Enhancement - disabled

    [    2.069060] OTG VER PARAM: 0, OTG VER FLAG: 0

    [    2.077859] Dedicated Tx FIFOs mode

    [    2.085582] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba814000 dma = 0xfa814000 len=9024

    [    2.105141] FIQ FSM acceleration enabled for :

    Non-periodic Split Transactions

    Periodic Split Transactions

    High-Speed Isochronous Endpoints

    [    2.139039] dwc_otg: Microframe scheduler enabled

    [    2.139093] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80417288

    [    2.150401] WARN::hcd_init_fiq:413: FIQ ASM at 0x804175f8 length 36

    [    2.162292] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb89c000

    [    2.173802] dwc_otg 3f980000.usb: DWC OTG Controller

    [    2.183605] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1

    [    2.197206] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000

    [    2.208010] Init: Port Power? op_state=1

    [    2.216063] Init: Power Port (0)

    [    2.223115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

    [    2.235827] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

    [    2.249236] usb usb1: Product: DWC OTG Controller

    [    2.258512] usb usb1: Manufacturer: Linux 4.1.19-v7+ dwc_otg_hcd

    [    2.269934] usb usb1: SerialNumber: 3f980000.usb

    [    2.279745] hub 1-0:1.0: USB hub found

    [    2.287470] hub 1-0:1.0: 1 port detected

    [    2.295822] dwc_otg: FIQ enabled

    [    2.295832] dwc_otg: NAK holdoff enabled

    [    2.295840] dwc_otg: FIQ split-transaction FSM enabled

    [    2.295871] Module dwc_common_port init

    [    2.296130] usbcore: registered new interface driver usb-storage

    [    2.307677] mousedev: PS/2 mouse device common for all mice

    [    2.319021] bcm2835-cpufreq: min=600000 max=1200000

    [    2.328814] sdhci: Secure Digital Host Controller Interface driver

    [    2.340458] sdhci: Copyright(c) Pierre Ossman

    [    2.349336] sdhost: log_buf @ ba813000 (fa813000)

    [    2.428878] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)

    [    2.461683] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0

    [    2.472738] mmc-bcm2835 3f300000.mmc: DMA channel allocated

    [    2.488932] Indeed it is in host mode hprt0 = 00021501

    [    2.499746] mmc0: host does not support reading read-only switch, assuming write-enable

    [    2.517253] mmc0: new high speed SDHC card at address 59b4

    [    2.518964] sdhci-pltfm: SDHCI platform and OF driver helper

    [    2.519332] ledtrig-cpu: registered to indicate activity on CPUs

    [    2.519454] hidraw: raw HID events driver (C) Jiri Kosina

    [    2.519642] usbcore: registered new interface driver usbhid

    [    2.519645] usbhid: USB HID core driver

    [    2.520049] Initializing XFRM netlink socket

    [    2.520074] NET: Registered protocol family 17

    [    2.520182] Key type dns_resolver registered

    [    2.520610] Registering SWP/SWPB emulation handler

    [    2.559401] registered taskstats version 1

    [    2.559581] vc-sm: Videocore shared memory driver

    [    2.559590] [vc_sm_connected_init]: start

    [    2.560770] [vc_sm_connected_init]: end - returning 0

    [    2.562088] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2

    [    2.665718] Waiting for root device /dev/mmcblk0p7...

    [    2.665935] mmcblk0: mmc0:59b4 NCard 7.48 GiB

    [    2.669939]  mmcblk0: p1 p2 < p5 p6 p7 >

    [    2.687522] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

    [    2.688871] usb 1-1: new high-speed USB device number 2 using dwc_otg

    [    2.689002] Indeed it is in host mode hprt0 = 00001101

    [    2.689082] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

    [    2.690629] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

    [    2.693407] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

    [    2.758741] EXT4-fs (mmcblk0p7): INFO: recovery required on readonly filesystem

    [    2.772173] EXT4-fs (mmcblk0p7): write access will be enabled during recovery

    [    2.783770] mmc1: new high speed SDIO card at address 0001

    [    2.889145] usb 1-1: New USB device found, idVendor=0424, idProduct=9514

    [    2.901639] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

    [    2.915491] hub 1-1:1.0: USB hub found

    [    2.923240] hub 1-1:1.0: 5 ports detected

    [    3.208885] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

    [    3.319124] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00

    [    3.331945] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

    [    3.348188] smsc95xx v1.0.4

    [    3.411904] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b7:a7:24

    [    5.170328] EXT4-fs (mmcblk0p7): orphan cleanup on readonly fs

    [    5.181938] EXT4-fs (mmcblk0p7): 1 orphan inode deleted

    [    5.192195] EXT4-fs (mmcblk0p7): recovery complete

    [    5.513869] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)

    [    5.528810] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.

    [    5.553300] devtmpfs: mounted

    [    5.560555] Freeing unused kernel memory: 444K (80795000 - 80804000)

    [    5.908700] random: systemd urandom read with 68 bits of entropy available

    [    5.925167] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)

    [    5.950989] systemd[1]: Detected architecture 'arm'.

    [    6.121309] NET: Registered protocol family 10

    [    6.131734] systemd[1]: Inserted module 'ipv6'

    [    6.143814] systemd[1]: Set hostname to <raspberrypi>.

    [    6.531286] systemd[1]: Expecting device dev-ttyS0.device...

    [    6.544947] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.

    [    6.559596] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

    [    6.573933] systemd[1]: Starting Remote File Systems (Pre).

    [    6.587167] systemd[1]: Reached target Remote File Systems (Pre).

    [    6.599102] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.

    [    6.617868] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

    [    6.637245] systemd[1]: Starting Encrypted Volumes.

    [    6.649601] systemd[1]: Reached target Encrypted Volumes.

    [    6.660454] systemd[1]: Starting Swap.

    [    6.670729] systemd[1]: Reached target Swap.

    [    6.679588] systemd[1]: Expecting device dev-mmcblk0p6.device...

    [    6.693376] systemd[1]: Starting Root Slice.

    [    6.704429] systemd[1]: Created slice Root Slice.

    [    6.714012] systemd[1]: Starting User and Session Slice.

    [    6.726927] systemd[1]: Created slice User and Session Slice.

    [    6.738268] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.

    [    6.753344] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.

    [    6.766675] systemd[1]: Starting Delayed Shutdown Socket.

    [    6.779758] systemd[1]: Listening on Delayed Shutdown Socket.

    [    6.791082] systemd[1]: Starting Journal Socket (/dev/log).

    [    6.804300] systemd[1]: Listening on Journal Socket (/dev/log).

    [    6.815824] systemd[1]: Starting udev Control Socket.

    [    6.827925] systemd[1]: Listening on udev Control Socket.

    [    6.838533] systemd[1]: Starting udev Kernel Socket.

    [    6.850492] systemd[1]: Listening on udev Kernel Socket.

    [    6.860986] systemd[1]: Starting Journal Socket.

    [    6.872437] systemd[1]: Listening on Journal Socket.

    [    6.882399] systemd[1]: Starting System Slice.

    [    6.893583] systemd[1]: Created slice System Slice.

    [    6.903385] systemd[1]: Starting File System Check on Root Device...

    [    6.919901] systemd[1]: Starting system-systemd\x2dfsck.slice.

    [    6.934115] systemd[1]: Created slice system-systemd\x2dfsck.slice.

    [    6.946302] systemd[1]: Starting system-autologin.slice.

    [    6.959356] systemd[1]: Created slice system-autologin.slice.

    [    6.970620] systemd[1]: Starting system-serial\x2dgetty.slice.

    [    6.984340] systemd[1]: Created slice system-serial\x2dgetty.slice.

    [    6.996516] systemd[1]: Starting Increase datagram queue length...

    [    7.012732] systemd[1]: Starting Restore / save the current clock...

    [    7.033046] systemd[1]: Mounting POSIX Message Queue File System...

    [    7.050265] systemd[1]: Starting Create list of required static device nodes for the current kernel...

    [    7.074139] systemd[1]: Starting udev Coldplug all Devices...

    [    7.131285] systemd[1]: Started Set Up Additional Binary Formats.

    [    7.144193] systemd[1]: Mounting Debug File System...

    [    7.189375] systemd[1]: Starting Load Kernel Modules...

    [    7.208235] systemd[1]: Mounted Huge Pages File System.

    [    7.219177] systemd[1]: Starting Slices.

    [    7.230021] systemd[1]: Reached target Slices.

    [    7.243491] systemd[1]: Mounted Debug File System.

    [    7.255679] systemd[1]: Mounted POSIX Message Queue File System.

    [    7.270713] systemd[1]: Started Increase datagram queue length.

    [    7.311306] fuse init (API version 7.23)

    [    7.321986] systemd[1]: Started Restore / save the current clock.

    [    7.337691] systemd[1]: Started Create list of required static device nodes for the current kernel.

    [    7.361974] systemd[1]: Time has been changed

    [    7.378156] i2c /dev entries driver

    [    7.388297] systemd[1]: Started File System Check on Root Device.

    [    7.403977] systemd[1]: Started Load Kernel Modules.

    [    7.417519] systemd[1]: Started udev Coldplug all Devices.

    [    7.567132] systemd[1]: Starting Apply Kernel Variables...

    [    7.583270] systemd[1]: Mounting Configuration File System...

    [    7.599531] systemd[1]: Mounting FUSE Control File System...

    [    7.605008] systemd[1]: Starting Create Static Device Nodes in /dev...

    [    7.610628] systemd[1]: Starting Syslog Socket.

    [    7.613885] systemd[1]: Listening on Syslog Socket.

    [    7.614051] systemd[1]: Starting Journal Service...

    [    7.621762] systemd[1]: Started Journal Service.

    [    7.773163] systemd-udevd[111]: starting version 215

    [    8.142179] rpi-ft5406 rpi_ft5406: Probing device

    [    8.142600] input: FT5406 memory based driver as /devices/virtual/input/input0

    [    8.469205] EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)

    [    8.628099] cfg80211: Calling CRDA to update world regulatory domain

    [    8.719024] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24

    [    8.719885] usbcore: registered new interface driver brcmfmac

    [    8.966409] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c

    [    8.992664] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code

    [    9.093632] bcm2835-rng 3f104000.rng: hwrng registered

    [    9.094189] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000

    [    9.392909] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code

    [    9.392935] cfg80211: World regulatory domain updated:

    [    9.392944] cfg80211:  DFS Master region: unset

    [    9.392953] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)

    [    9.392967] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)

    [    9.392980] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)

    [    9.392992] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)

    9.393007 cfg80211(5170000 KHz 5250000 KHz 80000 KHz  160000160000 KHz AUTO(N/A 2000 mBm(N/A

    9.393021 cfg80211(5250000 KHz 5330000 KHz 80000 KHz  160000160000 KHz AUTO(N/A 2000 mBm(0 s

    9.393034 cfg80211(5490000 KHz 5730000 KHz  160000160000 KHz(N/A 2000 mBm(0 s

    [    9.393046] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)

    [    9.393058] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)

    [    9.518076] systemd-journald[108]: Received request to flush runtime journal from PID 1

    [    9.868407] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists

    [    9.868430] brcmfmac: brcmf_add_if: ignore IF event

    [    9.873886] brcmfmac: power management disabled

    [   10.606396] uart-pl011 3f201000.uart: no DMA platform data

    [   10.994626] Adding 102396k swap on /var/swap.  Priority:-1 extents:1 across:102396k SSFS

    [   11.319062] random: nonblocking pool is initialized

    [   11.630989] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup

    [   11.631218] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

    [   13.250045] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

    [   13.253814] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1

    [   15.197767] Bluetooth: Core ver 2.20

    [   15.197851] NET: Registered protocol family 31

    [   15.197861] Bluetooth: HCI device and connection manager initialized

    [   15.197884] Bluetooth: HCI socket layer initialized

    [   15.197901] Bluetooth: L2CAP socket layer initialized

    [   15.197939] Bluetooth: SCO socket layer initialized

    [   15.214699] Bluetooth: HCI UART driver ver 2.3

    [   15.214720] Bluetooth: HCI UART protocol H4 registered

    [   15.214730] Bluetooth: HCI UART protocol Three-wire (H5) registered

    [   15.214740] Bluetooth: HCI UART protocol BCM registered

    [   15.553447] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

    [   15.553466] Bluetooth: BNEP filters: protocol multicast

    [   15.553489] Bluetooth: BNEP socket layer initialized

    [   25.129810] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)

    pi@raspberrypi:~ $

Children
No Data