Featured Articles
Announcing Pi
Technical Specifications
Raspberry Pi FAQs
Win a Pi
Raspberry Pi Wishlist
Actions
Forum Thread Details
  • Replies 6 replies
  • Subscribers 677 subscribers
  • Views 465 views
  • Users 0 members are here
Related

Arduino/AVR Problems on my Gertboard

Former Member

Hi there can someone help me get the AVR 328P-PU Microcontroller working with Arduino IDE.

I have followed and completed the setup instructions in the manual and on the website mentioned in the manual.

The error i am gettin is listed below:

 

avrdude: verification error, first mismatch at byte 0x0000

              0x0c  != 0x00

avrdude: verification error; content mismatch

 

and on the Gertboard all the buffered LEDs are lit

 

the sketch im trying to load is Blink example

 

If you need more information just ask and i will try my best to help get the information you requier.

 

Many Thanks in Advance

Lee

 

P.S: Sorry for any gramatical / spelling errors

Parents Reply Children
  • in reply to guzunty

    adding to the above...

     

    1)  Check that you have selected the correct board which will be: Gertboard ATMEGA.

    2)  Check that the port is Raspberry Pi Programmer

    3) When uploading the sketch, make sure you go to file > 'upload using programmer'

     

     

    Number 3 is the main cause of the issues you are having.  you MUST upload using programmer.