Raspberry Pi

Raspberry Pi Forum Cirrus ADC in PureData?

Join Raspberry Pi to participate - click to join for free!

Featured Articles

Announcing Pi

Technical Specifications

Raspberry Pi FAQs

Win a Pi

Raspberry Pi Wishlist

Actions

Forum Thread Details

State Not Answered
Replies 3 replies
Subscribers 707 subscribers
Views 815 views
Users 0 members are here

Related

Cirrus ADC in PureData?

e14 Contributor over 10 years ago

Hello everyone!

I've been trying to make ADC work inside puredata withouth success.

I can get sound out of the DAC with good quality, but get no signal when i plug something in the line-in.

I tried to mess with alsa-mixer in the terminal, also with no success...

I'm a noob on linux and pi, so maybe i'm just missing something elemental....

I used the SD card image provided by element14 with the cirrus drivers,

and followed this instructions to install PD:

JTUS - Journey To Unknown Soundscapes: PureData (pd-extended) on Raspi2 with Cirrus Logic Card

When i make a simple patch attaching the ADC to the DAC object, i get no sound, neither using the test audio patch provided by PD.

I bouth Raspi and Cirrus mainly for processing line-in audio, so right now i'm kind of frustrated...

what am a missing?

anyone found this same situation or knows how to help me?

thank you very much!

Santi Vilanova

www.playmodes.com

Parents

0 hiassoft over 10 years ago
What do you mean by "messing with alsa mixer in the terminal"?

To configure the card to record from linein and to playback to lineout you just have to use the "usecase scripts":

Reset_paths.sh Playback_to_Lineout.sh Record_from_lineIn.sh

Then try if both recording and playback actually work:

arecord -f cd | aplay

The latter command should playback the signal from line-in to line-out.

BTW: Instead of using the rather old image from the element14 site you're better off using a current Raspbian (Jessie) image plus my kernel. Instructions are on my website RPi Linux driver for Wolfson / Cirrus Logic Audio Card and in this thread: Driver fixes and updates to kernel 3.18.16 and 4.0.5

so long,

Hias
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 hiassoft over 10 years ago
What do you mean by "messing with alsa mixer in the terminal"?

To configure the card to record from linein and to playback to lineout you just have to use the "usecase scripts":

Reset_paths.sh Playback_to_Lineout.sh Record_from_lineIn.sh

Then try if both recording and playback actually work:

arecord -f cd | aplay

The latter command should playback the signal from line-in to line-out.

BTW: Instead of using the rather old image from the element14 site you're better off using a current Raspbian (Jessie) image plus my kernel. Instructions are on my website RPi Linux driver for Wolfson / Cirrus Logic Audio Card and in this thread: Driver fixes and updates to kernel 3.18.16 and 4.0.5

so long,

Hias
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data