Bonjour ,
J ai acheté chez SainSmart :
Je n arrive pas a le faire fonctionne .
J ai déjà essayé plusieurs type de driver en vain , l'ecran reste toujours blanc.
sur https://github.com/notro/wiki
je n'arrive pas a trouver lequel choisir .
Merci
Bonjour ,
J ai acheté chez SainSmart :
Je n arrive pas a le faire fonctionne .
J ai déjà essayé plusieurs type de driver en vain , l'ecran reste toujours blanc.
sur https://github.com/notro/wiki
je n'arrive pas a trouver lequel choisir .
Merci
To add to what John said here are a couple of links that may have more detail on enabling the driver
http://www.valdodov.com/index.php?show=hardware&item=1
http://ozzmaker.com/2013/05/23/raspberry-pi-with-a-3-2-tft-with-touch-control
http://www.raspberrypi.org/forums/viewtopic.php?f=64&t=33679
I realize these are not direct instructions, but they may contain enough information to get you going.
Mike
To add to what John said here are a couple of links that may have more detail on enabling the driver
http://www.valdodov.com/index.php?show=hardware&item=1
http://ozzmaker.com/2013/05/23/raspberry-pi-with-a-3-2-tft-with-touch-control
http://www.raspberrypi.org/forums/viewtopic.php?f=64&t=33679
I realize these are not direct instructions, but they may contain enough information to get you going.
Mike
BTW, that is pretty inexpensive, and since I have actually looked into this before, I ordered one. If you don't have an answer in a week or two, I may be able to provide one.
Mike
I have a cheap 1" SPI LCD if it's on the supported list I may well have a go too