HHi out there, Q. How can i fit a Pi Face board to a raspberry pi model B+ v1,2
magne
Message was edited by: Magne Selbach
HHi out there, Q. How can i fit a Pi Face board to a raspberry pi model B+ v1,2
magne
Message was edited by: Magne Selbach
Unless you have an old one, buy this PiFace PiFace Control and Display Revision 2 | 2434231 | PiFace.
Assuming you already have the version 1 of the PiFace, you could try 40-Pin to 26-Pin + 14-Pin Adapter for Raspberry PI B+ - Red - Free Shipping - DealExtreme. The PiFace will be shifted over and may have other problems like USB overhang and will be higher too.
There is also this.
http://www.adafruit.com/products/1979
Last time I looked element14 weren't stocking it, but that may have changed, so check your local store.
Mark
Those are what I use, works very well but the board is left hanging a little so you need to be careful
Oh I totally agree
I am totally new to this, but didn't I see a stacking adapter for this problem somewhere?