PT100

Question

I would like to know with which temperature tester (brand and model) I can use the PT100 probe of TE Connectivity with manufacturer code NB-PTCO-158.

geralds · Answer

Hi celex ,

You can not connect directly that sensor on an temp. tester, if it has not an amplifier.

http://www.farnell.com/datasheets/2305684.pdf

Please read the data sheet and build a signal conditioning module with preamp.

https://de.farnell.com/en-DE/c/automation-process-control/signal-conditioning/signal-converters?signal-conditioner-input…

Best Regards

Gerald

--

Gough Lui · Answer

You could test the probe with a handheld indicator that supports Pt100 (but check the alpha value) - some examples include: https://au.omega.com/pptst/HH370.html https://www.tcaus.com.au/temperature_instruments/RTD_indicator.html or alternatively, if you're near a bench, you could use a high-accuracy DMM and convert resistance values using the standard Pt100 curve. Do your own research before making any purchases as I can't guarantee compatibility. - Gough

ajcc · Answer

It's hard to tell what your idea of a temperature tester is from your question and the product you've picked out (which as far as I can tell is just the cheapest PT100 RTD available on Newark). From your question it sounds like you want a handheld meter, but from the sensor it seems like you just want to play around with RTDs? If you search for PT100 Resistance Table you'll notice that you need a fairly accurate way of measuring the resistance, in practice that means a good current source and a differential/instrumentation amplifier. If you're familiar with microcontrollers then a development board for something like the MAXIM MAX31865 MAXIM MAX31865 all-in-one solution with its SPI interface could be interesting? You can also find a lot of application notes on how to use and build circuits for reading RTDs, like this one from Ti or this blog post from Ti listing different circuit topologies.

PT100

Top Replies