Sensors

Sensor Forum Problem with MICROSTACK BASE BOARD and L80

Join Sensors to participate - click to join for free!

Actions

Forum Thread Details

Replies 3 replies
Subscribers 342 subscribers
Views 505 views
Users 0 members are here

Related

Problem with MICROSTACK BASE BOARD and L80

Former Member over 10 years ago

Hello,

I try to use these two modules with RPi2 :

MICROSTACK BASE BOARD - MICROSTACK - ADAPTER CARTE ADD-ON POUR RASPBERRY PI | Farnell element14

http://fr.farnell.com/microstack/microstack-gps/carte-add-on-l80-gps-raspberry/dp/2434228

Following instructions, I have installed all necessary software in Raspbian but without any success : I have a GPS time out error using cgps -s

Is it because the GPS hasn't fix any position ?

Can I use this GPS without any antenna ?

I suspect the module to be brocken...

Any help would be very appreciated.

Regards,

frank

Parents

Former Member over 10 years ago

Try cat /dev/ttyAMA0 if this doesn't work, then you need to reconfigure /root/cmdline.txt.

I tested this, and it's working properly.

https://learn.adafruit.com/adafruit-ultimate-gps-on-the-raspberry-pi/using-uart-instead-of-usb
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Former Member over 10 years ago in reply to Former Member

Petri,

Ok I will try to work around ttyAMA0 and cmdline.txt.

Your link is not working for me : Could you give an updated link please ?

Thks for your help,
frank
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Former Member over 10 years ago in reply to Former Member

finally, it was because I made indoors tests without any antenna ! Putting Microstack GPS near window solved the problem !
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

Former Member over 10 years ago in reply to Former Member

finally, it was because I made indoors tests without any antenna ! Putting Microstack GPS near window solved the problem !
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data