element14 Community

Welcome to

Twist, Turn and Move Design Challenge with TE Robotics

Use your robotics skills to make that machine move!

See how our winners used the TE Connectors kit, an Arduino Uno, and Robotics Shields to build a mobile robot or arm that performs a specific task.

THE KIT
Chosen challengers will receive the TE Robotics Challenge Kit Buy Kit
THE PRIZE
Flash Forge Guider II 3D Printer, and iRobot Roomba Self Emptying Robot Vacuum Clearer Grand Prize	iRobot Bravaa Jet Robot Mop, and Ender 3 V2 3D Printer Runner Up Prize

All challengers who complete their project by the submission deadline: 2nd September 2022 will receive a MultiComp Pro Multimeter Set.

Forum - Thread List

Suggested Answer

Shipment custom clearance 0

787 views

7 replies

Latest 9 months ago
by hitesh.boghani
Not Answered

Alleviate shared pin problem on expansion boards...any suggestions? 0

331 views

2 replies

Latest 10 months ago
by hitesh.boghani

Blog - Post List

Experimenting With Thermistors - Cool Prize

dougw

Here is the very nice tool kit supplied to finishers in the Experimenting With Thermistors . It comes in a clever fold-up tool case that has a snap-in location for each tool. The tool assortment is well chosen to cover a wide range of usage requ...
- 25 Oct 2022
2nd Place Prizes Received!!

dwinhold

I am so thrilled with the prizes that I received!! I didn't realize there was a prize included for the cat (Mr. Meowser) as well!! Finisher Prize!! 3D Printer IRobot Mop Mr. Meowser approves of the prizes Mr. Meowser enjoying his p...
- 20 Oct 2022
Multicomp DMM Prize

dougw

I received a nice Multicomp DMM as a prize in the Twist, Turn and Move Design Challenge for my Sammy Semaphore entry: For some reason there is a ball bearing in the package? Any ideas what that is for? Thanks element14, it was a fun project.
- 15 Oct 2022
Blog #2: TTM Design challenge - Creating a Robot Arm with Scavenged Parts

hitesh.boghani

Let's meet the arm (or rather arm joint) of the robot that doesn't exist as of yet! Mechanical assembly of robot arm I had some printer parts (motors, gears, sheet metal parts) that I wanted to use to create this robot. Also, I had thought of using t...
- 28 Sep 2022
Blog #1: TTM Design challenge - Introduction

hitesh.boghani

First off - I have a confession to make that I had some time adversities due to illnesses in my house so I'm quite late in writing up the blogs and completing the challenge. However, I would say that I am only completing the blogs and as far as the c...
- 19 Sep 2022
Sammy Semaphore Fully Functioning - Blog 7

dougw

Intro Sammy Semaphore is finally fully functional, complete with remote Bluetooth control. He turned out very well, although not without having to work through adversity. The biggest issues were supply chain and the fact that I got very sick. Sammy S...
- 13 Sep 2022
TE Connectivity Connector Tester - Blog 6

dougw

Intro There is only one day left before the deadline for this contest, so I need to publish where I am at. The Connector Tester part of this project involved designing a couple of PCBs to allow TE Connectivity connectors to be tested. Unfortunately n...
- 13 Sep 2022
Twist, Turn and Move Design Challenge with TE Robotics - Unlimited CNC Robot Blog 7 (Final Blog)

dwinhold

Unlimited CNC Robot Blog 7 (Final Blog) My final video of the working project: community.element14.com/.../CNC-Final.mp4 I want to thank our sponsor TE Connectivity for making this challenge possible. Thank you to Element14 and the community for h...
- 13 Sep 2022
The Robocat: Final Blog Post

jwr50

With the deadline here, I am presenting the current state of The Robocat. We have achieved nearly all of our goals by creating a wheeled robot with a super cute cat body. The Robocat can follow pre-programmed paths, identify a laser pointer dot...
- 12 Sep 2022
RARM is alive!

GustavoMorales

And now, the results. A long time passed since the challenge started. Difficulties have passed and now it is time to get into presenting to the community results. First, let me show you some pictures, and then I am attaching a video so you can...
- 12 Sep 2022