I cannot open properly KL43Z examples in KDS

Hi

You need to follow the below steps

Step-1: Install KSDK1.1.0 update.

Step-2: Build Platform library.

Step-3: Build demo application.

Step-4: Import existing demo project to workspace then compile & execute the project.

I have posted similar blog on working with example programs for SDcard on KDS + KSDK tool :

'Create an IoT system with FRDM-K64F and SDK - Part 1 : Enable the SD-Card'

let me know whether this works out for you.

Best Regards

Bheema Rao

Thanks bheemarao, but...

I am sad to say no...

The problem is that I import examples from C:\Freescale\KSDK1.0.0_KL43Z_1.0.1\usb\example\device, not from demos folder.

And I get this:

Examples from demos folder builds ok.

Thanks

Hi,

After installing the "KSDK1.0.0_KL43Z_1.0.1" from freescale wesite you need to build platform library for KL43Z board as shown for K64 in my blog,

i did the build for platform library for KL43Z board by importing the library platform from below path "C:\Freescale\KSDK1.0.0_KL43Z_1.0.1\lib\ksdk_platform_lib\kds\KL43Z4"

it will compile with no errors, now you can add your demo example from "C:\Freescale\KSDK1.0.0_KL43Z_1.0.1\demos" and import the required project.

i imported 'hello_world_frdmkl43z48m' project and build/compiled, it was successful with no errors.

please try the same at your end and let me know.

Best Regards

Bheema Rao

Yeah, I was doing this. I was building first the driver library, and it works for demo projects.

But, the problem was that it is not enough for usb examples, it should be built also a usb library, in this case "usbd_sdk_frdmk43z48m_bm" lib. Once built this two libraries I can build the usb example.

Thanks for your support!!

Regards,

Miguel

Hi Miguel,

Thanks for the reply.

In my case when i added the bare metal project (usbd_sdk_frdmkl43z48m_bm) by importing from the path "C:\Freescale\KSDK1.0.0_KL43Z_1.0.1\usb\usb_core\device\build\kds" it is building with out any errors.

the only thing in my KDS tools is i have upgraded to KSDK1.1.0, but the SDK support for KL43Z is provided for "KSDK1.0.0_KL43Z_1.0.1" you can change the project path to KSDK 1.0.0 at the beginning of creating workspace. just try this once.

Best Regards

Bheema Rao

Hi Miguel

Looks like Bheema answered well your question, right ?

Don't hesitate if you have additional questions or please turn your question as answered to make the solution visible by other community users

Thanks