Strange Prices

I expect BBB pricing to remain "strange" and disparate across the world, because Premier Farnell isn't a BBB manufacturer as it is for Raspberry Pi, and so different forces are in play.  There is also an inevitable conflict of interest to some degree, since every BBB sold probably means one less sale of Pi Model B.  We'll never know how that's being played, as it's an internal business matter.  They've already raised the price once, as BBB was initially listed at £27.<something> in the UK and now it's listed at £30.99.

As you point out though, their price leeway is limited.  If BBB is priced too high, people will just go elsewhere.

The same applies to stock issues as it does to price issues.  At least in the UK, Farnell is ordering relatively few BBBs each week and there are never any in stock, so customers may be going elsewhere.  Currently their stock info says:

Availability:  Awaiting Delivery

 

1000 will be available for delivery on 27 May, 2013

5000 will be available for delivery on 2 Jun, 2013

1500 will be available for delivery on 3 Jun, 2013

I suspect that CircuitCo doesn't allow them any greater numbers so it's not Farnell's fault, but that's no comfort to eager customers.  Those who have succumbed to the BBB feeding frenzy will go elsewhere.

> because Premier Farnell isn't a BBB manufacturer as it is for Raspberry Pi

Do we really know what this difference amounts to?

Premier Farnell doesn't actually manufacture either device.

Sony manufactures the RPi, and Circuitco manufactures the BBB.

I think RS Components is directly involved in testing returned RPis,

but I don't think Farnell even does that.

Farnell may be involved to some extent in supplying components.

We have heard for example that RS didn't order enough Broadcom cpu's

early on.  But we have also heard that the RPF got stuck owning

inventories of memory chips.  So it isn't exactly clear to what extent

Farnell is involved in component inventories for RPi compared to BBB.

coder27 wrote:

 

If company A is located in a high-wage country, selling products that compete on the market with those from company B located in a low-wage country,

An advanced technological nation shouldn't be trying to compete on the cost of human labor.  Robots earn the same wage in all countries.

And it's not only a matter of avoiding labor costs.  Robotic assembly also yields more consistent and higher quality assemblies when done effectively, since robots don't get tired towards the end of the day and they don't have liquid lunches nor marriage problems nor financial worries to distract them etc etc etc.

And in turn, a consequence of the improved quality is that your products compete at a higher level where competition is less and margins are higher, instead of competing at the base level alongside a million others.

Farming out assembly work to a low-wage country just means insufficient investment in automation was made at home.  It's a vicious circle which holds you back in numerous ways.  It's an illusion that as long as profit is made, everything else is equal even if you outsource.  Or perhaps the right word is delusion.

An advanced technological nation shouldn't be trying to compete on the cost of human labor.  Robots earn the same wage in all countries.

Yes, but using robots doesn't solve John's employment issue:

The horrible fact is that we need some kind of manufacturing industry because in reality 80+ % of people are just average not super duper brain surgeons/rocket scientists/engineers etc.

There's no realistric way a country can be self supporting with out involving that 80+% and at the moment that involves some form of manufacture.

And robots obviously can't do every job.  Software jobs are a good example where

there are only a few barriers to a global labor pool, such as security clearances required

for defense jobs.

coder27 wrote:

 

Yes, but using robots doesn't solve John's employment issue:

Not without socio-economic reform, I agree.  But socio-economic reform is very much on the cards.  A future in which people still need to work merely in order to survive is not much of a future to look forward to.  If in a few hundred years' time people still need to go to work (as opposed to want to be involved productively not for money) then as engineers we will have failed humanity.

Yes, but using robots doesn't solve John's employment issue:

I would think that when there's a robot, there's a human to service it, set it up, and the like.

If the company was manually making the product it would possibly only sell x units.

Some of the same other overheads of ordering, testing, and distribution are still there, but divided by x units.

Robot assembly is likely to reduce the human assembly cost, and therefore the product cost, meaning more can be sold.

This in turn means more support staff, which may be greater than those doing the assembly.

The capital cost of the assembly machinery is probably the sticking point, requiring a high investment.

It's a viscious circle no matter what.

We had a company here in NZ making garage doors.

Since no-one can be bothered getting out of their car to open them, they needed to add electronic openers.

They were being manufactured at some low cost overseas place, where volume, not quality was the bottom line.

The company nearly went bust over the warranty replacements, repairs, checking etc.

In desperation they went to in-house manufacture to improve the quality.

The payoff was the reputation went from zero to hero because they were no longer a product to avoid (never mind if the actual door was okay).

mark

coder27 wrote:

 

I think that claim was pretty much debunked, and no figures were ever released to back it up.

figures or not, it's exactly the sort of strange thinking our governments in the UK enjoy and as such I'd be more inclined to believe that one than not

Morgaine Dinova wrote:

 

I think the problem is that politicians don't make things,

I think the problem is politicans

Mark Beckett wrote:

 

I would think that when there's a robot, there's a human to service it, set it up, and the like.

most likely a reasonably large team of them, and even once it's up and running you need to keep feeding it whatever raw materials to keep it running

but the economics of it aren't simple, these smt assembly lines aren't cheap and the cost of the machines is likely to work out similar no matter where in the world you put them, to pay off that investment you need to run them continually for some number of years

So other things like land, facilities, local legislation, transport of materials in and goods out all start to become interesting. If you're a few miles away from sources for all your components that's obviously going to be better than shipping stuff around the world three times.

The other side to the problem is that more and more the design of electronic stuff is making it difficult, impossible, or at least completely impractical to assemble by hand, so more robots required!   Don't know about you, but I really don't like the idea of needing to hand solder thousands of densely packed 0201 R's and C's onto a board, it'll be slow, error prone, and the end quality will likely be very poor.  Even in the places with the cheapest labour costs I expect it's simply not viable for all sorts of things.

Of course, cheap labour costs lets you throw bodies at some problems in the way you couldn't easily do here.

A question was asked in parliament and the minister replied that nobody in his department had any idea what they were talking about. Bear in mind that the Raspberry Pi foundation is run by engineers and programmers, not by people with a background in navigating import procedures.

and bear in mind that the government is run by...................

leaving aside for a moment whether there's any truth to the RPF's statement or not,  I have no problem believing a there's politician (and their departments) who have no idea what anyone, including themselves, are talking about or what the reality of any given situation is

Mark Beckett wrote:

 

It's a viscious circle no matter what.

It's a vicious circle today, but bearing in mind that I was referring to a future a few hundred years ahead in which technology is able to replace human labour, one needs to add the dimension of time to the plot.  That vicious circle today then becomes a parametric spiral of decreasing amplitude as it moves ahead in time, because the labour required today for manufacture and in-field support of robots itself gets replaced by more robots.  (I'm using the area enclosed by the circle to denote manpower involved in the loop as a representation here.)

As the areas in which humans can labour more cost-effectively than machines dwindle, the diameter of the vicious circle gets smaller and smaller, aided by step reductions in size as social, economic and legal changes reflect the new realities of life.  As today's industrial necessity to involve a lot of humans in production evolves into a more fully mechanised future, so the current meme that human labour is a normal part of the industrial process will also dissipate.  There is no point in adding people to the mix when machines can do the labour more effectively.

It's easy to see where that's going, at least in Europe where social welfare is accepted as important and integral to the role of business rather than a problem to be brushed under the carpet.  As less and less of the population is supported by salaries paid by industry and commerce, so that salarial contribution to social health and prosperity will be replaced by other forms of contribution to avoid social disaster.  Society falling into poverty while businesses prosper is not how things work over here, and there is no reason to believe it will change for the worse.

In the US, it's much more difficult to predict the outcome, because those who are not in work are very widely despised there today, and supporting society at large is seen as an unwanted burden rather than a widespread implicit desire to raise the standard of living of the nation as a whole.  I don't know how that will pan out, but clearly there is a much stronger need for socio-economic reform of the prevailing meme there than there is in Europe.  On the current course in USA, the widespread replacment of human labour by machines leads directly to apocalyptic social disintegration, so clearly there's a big problem ahead.

Morgaine wrote:

.... I was referring to a future a few hundred years aheadin which technology is able to replace human labour....

If (and thats a really big if) I'm still alive then, I just hope the robot that cleans me up after my 'accident' is programmed by another.

The alternative where its programmed by some spotty nerd, fresh out of school (or the modern equivalent) who fails to understand the sagging phenomenon brought on by old age, is too painful to picture.

mark

Morgaine wrote:

.... I was referring to a future a few hundred years aheadin which technology is able to replace human labour....

If (and thats a really big if) I'm still alive then, I just hope the robot that cleans me up after my 'accident' is programmed by another.

The alternative where its programmed by some spotty nerd, fresh out of school (or the modern equivalent) who fails to understand the sagging phenomenon brought on by old age, is too painful to picture.

mark