Actions
Forum Thread Details
  • Replies 36 replies
  • Subscribers 190 subscribers
  • Views 4700 views
  • Users 0 members are here
Related

in V6.0.0 manual routing got really hard

e14 Contributor

somethings changed, when i manually route and click on the destination pad, if i dont click dead center now... im left with tiny tiny airwires

5.11 didnt do this... i have messed with alot of settings, nothing seems to help

Parents

  • I've literally just spotted that - and worked out how to get it working (was about to post a new message!)

     

    Basically, if you move a component, then the manual routing for that component gets difficult - it doesn't snap the wire to the pad centre.

     

    What you need to do is click on the "Ratsnest" icon - this resets the ends of the air wires.

     

    Or, you can abort your manual route half-way through, and then restart it from where you left off.

     

    I'm beginning to think that V6.0.0 is a bit of a step backwards - and certainly doesn't seem to warrant a major version number upgrade.

Reply

  • I've literally just spotted that - and worked out how to get it working (was about to post a new message!)

     

    Basically, if you move a component, then the manual routing for that component gets difficult - it doesn't snap the wire to the pad centre.

     

    What you need to do is click on the "Ratsnest" icon - this resets the ends of the air wires.

     

    Or, you can abort your manual route half-way through, and then restart it from where you left off.

     

    I'm beginning to think that V6.0.0 is a bit of a step backwards - and certainly doesn't seem to warrant a major version number upgrade.

Children