Actions
Forum Thread Details
  • State Not Answered
  • Replies 18 replies
  • Subscribers 192 subscribers
  • Views 1928 views
  • Users 0 members are here
Related

Methods of Viewing Nets

e14 Contributor

I have been using Eagle for a few months now after previously using Pads and the biggest drawback seems to be the inability to color code the nets.  This makes intelligent component placement and the drawing of pour areas a lot more tedious than those operations need to be.  I did read the tip about using the RATSNEST command to hide/show certain nets and that helps somewhat prior to routing.   But for drawing the pour areas which I normally do after routing, I have resorted to sticking pieces of tape to the computer screen while the SHOW command highlights the net of interest to mark the boundaries of where I want to draw the pour.  Or course once I begin drawing the pour the highlighted net disappears but the little pieces of tape remain and I can draw the pour using the pieces of tape as a guide.  I would just like to know if there is a more sensible way to do this in Eagle.

Parents
  • 0

    Why not simply fix Eagle so the Show command works as needed? Clicking on

    anything after "showing" makes it go away, severely limiting its use. May

    be use a shift-click to "lock" it.

    Also, there should be an option to have a highlighter (as though you took a

    highlighter to a schematic or board layout)--when you are zoomed out (such

    as trying to view a net in a large schematic), it is hard to see the very

    thin lines even when they are colored/shown.

    --

    Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

     

  • 0 in reply to e14candies

    I agree, this is something that needs fixing in EAGLE. It's been raised several times before (including by myself) and from what I can gather it is at least on Cadsoft's radar so hopefully this will end up resolved in some future version.....

  • 0 in reply to rachaelp

    Am 09.07.2016 um 22:21 schrieb rachaelp:

    I agree, this is something that needs fixing in EAGLE. It's been raised several times before (including by myself) and from what I can gather it is at least on Cadsoft's radar so hopefully this will end up resolved in some future version.....

     

    --

    To view any images and attachments in this post, visit:

    https://www.element14.com/community/message/201141

     

     

    I think this wish is about as half as old as eagle itself.

    Among others I suggested to make it flash because  in today's plenty of

    layers, signal colours are hardly to distinguish even if they are high

    lighted.

    It might be that cadsoft has it on Radar but imho the Show command seams

    to be in stealth mode image

     

    --

    Mit freundlichen Grüßen / With best regards

     

    Joern Paschedag

     

  • 0 in reply to rachaelp

    Am 16.07.2016 um 10:57 schrieb rachaelp:

    Joern Paschedag wrote:

     

    Among others I suggested to make it flash because in today's plenty of layers, signal colours are hardly to distinguish even if they are high lighted.

     

    Yes you are right, it can be hard to distinguish at times. I think a related feature which I have mentioned previously is to allow different colours to be assigned to different net classes. This combined with a persistent highlight and a larger default colour palette should make a big difference. I do kinda like the idea of having the ability to temporarily make a highlighted net flash to accentuate the highlight, I can see that being quite helpful at times.

     

    Joern Paschedag wrote:

     

    It might be that cadsoft has it on Radar but imho the Show command seams to be in stealth mode image

     

    They would obviously benefit from having a persistent highlight on their todo list as well image

     

    Best Regards,

     

    Rachael

     

    --

    To view any images and attachments in this post, visit:

    https://www.element14.com/community/message/201564

     

     

    Bulls Eye image

     

    --

    Mit freundlichen Grüßen / With best regards

     

    Joern Paschedag

     

  • 0 in reply to rachaelp

    Am 16.07.2016 um 10:57 schrieb rachaelp:

    Joern Paschedag wrote:

     

    Among others I suggested to make it flash because in today's plenty of layers, signal colours are hardly to distinguish even if they are high lighted.

     

    Yes you are right, it can be hard to distinguish at times. I think a related feature which I have mentioned previously is to allow different colours to be assigned to different net classes. This combined with a persistent highlight and a larger default colour palette should make a big difference. I do kinda like the idea of having the ability to temporarily make a highlighted net flash to accentuate the highlight, I can see that being quite helpful at times.

     

    Joern Paschedag wrote:

     

    It might be that cadsoft has it on Radar but imho the Show command seams to be in stealth mode image

     

    They would obviously benefit from having a persistent highlight on their todo list as well image

     

    Best Regards,

     

    Rachael

     

    --

    To view any images and attachments in this post, visit:

    https://www.element14.com/community/message/201564

     

    Direct Hit image

     

    --

    Mit freundlichen Grüßen / With best regards

     

    Joern Paschedag

     

  • 0 in reply to autodeskguest

    Joern Paschedag wrote:

     

    Among others I suggested to make it flash because in today's plenty of layers, signal colours are hardly to distinguish even if they are high lighted.

     

    Yes you are right, it can be hard to distinguish at times. I think a related feature which I have mentioned previously is to allow different colours to be assigned to different net classes. This combined with a persistent highlight and a larger default colour palette should make a big difference. I do kinda like the idea of having the ability to temporarily make a highlighted net flash to accentuate the highlight, I can see that being quite helpful at times.

     

    Joern Paschedag wrote:

     

    It might be that cadsoft has it on Radar but imho the Show command seams to be in stealth mode image

     

    They would obviously benefit from having a persistent highlight on their todo list as well image

     

    Best Regards,

     

    Rachael

Reply
  • 0 in reply to autodeskguest

    Joern Paschedag wrote:

     

    Among others I suggested to make it flash because in today's plenty of layers, signal colours are hardly to distinguish even if they are high lighted.

     

    Yes you are right, it can be hard to distinguish at times. I think a related feature which I have mentioned previously is to allow different colours to be assigned to different net classes. This combined with a persistent highlight and a larger default colour palette should make a big difference. I do kinda like the idea of having the ability to temporarily make a highlighted net flash to accentuate the highlight, I can see that being quite helpful at times.

     

    Joern Paschedag wrote:

     

    It might be that cadsoft has it on Radar but imho the Show command seams to be in stealth mode image

     

    They would obviously benefit from having a persistent highlight on their todo list as well image

     

    Best Regards,

     

    Rachael

Children
  • 0 in reply to rachaelp

    Am 16.07.2016 um 10:57 schrieb rachaelp:

    Joern Paschedag wrote:

     

    Among others I suggested to make it flash because in today's plenty of layers, signal colours are hardly to distinguish even if they are high lighted.

     

    Yes you are right, it can be hard to distinguish at times. I think a related feature which I have mentioned previously is to allow different colours to be assigned to different net classes. This combined with a persistent highlight and a larger default colour palette should make a big difference. I do kinda like the idea of having the ability to temporarily make a highlighted net flash to accentuate the highlight, I can see that being quite helpful at times.

     

    Joern Paschedag wrote:

     

    It might be that cadsoft has it on Radar but imho the Show command seams to be in stealth mode image

     

    They would obviously benefit from having a persistent highlight on their todo list as well image

     

    Best Regards,

     

    Rachael

     

    --

    To view any images and attachments in this post, visit:

    https://www.element14.com/community/message/201564

     

     

    Bulls Eye image

     

    --

    Mit freundlichen Grüßen / With best regards

     

    Joern Paschedag

     

  • 0 in reply to rachaelp

    Am 16.07.2016 um 10:57 schrieb rachaelp:

    Joern Paschedag wrote:

     

    Among others I suggested to make it flash because in today's plenty of layers, signal colours are hardly to distinguish even if they are high lighted.

     

    Yes you are right, it can be hard to distinguish at times. I think a related feature which I have mentioned previously is to allow different colours to be assigned to different net classes. This combined with a persistent highlight and a larger default colour palette should make a big difference. I do kinda like the idea of having the ability to temporarily make a highlighted net flash to accentuate the highlight, I can see that being quite helpful at times.

     

    Joern Paschedag wrote:

     

    It might be that cadsoft has it on Radar but imho the Show command seams to be in stealth mode image

     

    They would obviously benefit from having a persistent highlight on their todo list as well image

     

    Best Regards,

     

    Rachael

     

    --

    To view any images and attachments in this post, visit:

    https://www.element14.com/community/message/201564

     

    Direct Hit image

     

    --

    Mit freundlichen Grüßen / With best regards

     

    Joern Paschedag