Import SVG help !!!!!

Hi Ritchie,

How are you importing an SVG into EAGLE? I've looked and I have no import option for this and there are no ULP in my installation in any v7 version of EAGLE that look like they would do the job. Is this a 3rd party ULP you are using? From the error message it looks like maybe something that is just a line with a start and an end point in the SVG is being interpreted as a polygon by the imported and hence it doesn't actually have enough points to draw the polygon. Where does the SVG come from? Is it exported from a drawing tool or something?

Best Regards,

Rachael

Hi Rachael and many thanks for your prompt reply.

The ULP for SGV import is "svg2poly.ulpt" here the link enclosed :

https://github.com/cmonr/Eagle-ULPs

I tested this ULP because I have more prob. with OSH Park, when I upload my

project with a logo in bmp it seems to be not recognize !!!!!! I decided to

test with alternative SVG import but not working....I'm going to be crazy

!!!

Do you can do some tests for me please ? try to import the logo I attached

and upload the berber fiel into a zip on OSH Park and let me know ?

Here my personal mail if you want :

mailto:ritchie@ritchie.fr

Are you in UK ?

regard and thanks by advance.

Ritchie

--

Web access to CadSoft support forums at www.eaglecentral.ca.  Where the CadSoft EAGLE community meets.

Attachments:

On 10.08.2016 10:21, Ritchie Mettens wrote:

Hi all and thanks for your help.

 

I note that the ULP works only with INSKAPE output process.

 

What a pity...if someone have another solution let me know.

I used bitmap import and then drew polygons manually over it to avoid

the huge number of rectangles created by the import.

Alternatively you could look at DIY milling or lasercutter sw. They can

probably make importable milling vectors out of high dpi bitmaps to get

a smoot result. But tbh, this sounds a bit awkward.

Hi Ritchie,

Why don't you try converting the SVG to a DXF with something like this: https://cloudconvert.com/svg-to-dxf

Then you can try to import the resulting DXF into EAGLE.

As the DXF importer is supplied as part of EAGLE and integrated in the UI by CADSoft it may be a little fuller in implementation than the SVG importer you were using. I've not tried converting an SVG in this way and importing the resulting DXF so I don't know how well it will work but it might be worth a try.

Best Regards,

Rachael

Hi my friend WHY NOT !!

I didn't think about it !!!!

I will this test today and I let you know...

Thanks boy !!

Regards

Ritchie

Hi Rachael.

Doesn't works nothing happens when I import !!!!!!!!!!!! the pict is not on the board, not error.

I don't understand !!!

Thanks.

Ritchie

Hi Ritchie,

I just tried it and it worked fine with the SVG file I started with. The resulting DXF imported into layer 50 of my layout without issue. Maybe it's a scaling thing and it's there but scaled incorrectly?

Best Regards,

Rachael

Really ???? I AM STUPID !! my friend..

Layer 50 ? me 21 I will try with the same layer and I let you know.

Ritchie

Ritchie Mettens wrote:

 

Really ???? I AM STUPID !! my friend..

 

Layer 50 ? me 21 I will try with the same layer and I let you know.

 

 

 

Ritchie

Layer 21 works for me too. Just to make sure we are both doing the import in the same way here is how I did the import.

In the board editor I do:

File -> Import -> DXF....

Select my .dxf file and choose my target layer then click ok.

You then get another window with the generated script for creating the actual image in the selected layer. This has two options, Run or Cancel. Choose Run and the image should then appear.

Are you getting the script window pop up with the option to run the script?

Best Regards,

Rachael

I must to be cursed !!!

I did EXACTLY the same thing !!!! I have the script window pop up with the option "run the script" but the pict don't appear !!!! I don't have any error message.

I DON'T UNDERSTAND !!!!!!

I will do another tests and I let you now my friend

Thanks for you patience but it seems I must to be STUPID !!!

Ritchie

Attachments:

You don't have permission to edit metadata of this video. Edit media Dimensions x Small Medium Large Custom Subject (required) Brief Description Tags (separated by comma) Video visibility in search results Visible Hidden Parent content RE: Import SVG help !!!!! Poster Upload Preview Ok Cancel

If you want take a look here a screening of my process.

Tanks

So you've not taken your SVG file and converted it to DXF using the web converter I linked to?

The import process in your video seems to take a very long time and if you look at the script it generates there is nothing of note in it which explains why it draws nothing. I think the DXF output from Adobe illustrator must be generating something that the importer in EAGLE doesn't like.

So I searched google for SVG files of varying complexity to test this out, I found a simple one of some gears first, then some more intricate patterns and finally I found an SVG called "Awesome Tiger" all of which I exported to DXF using the website I linked and then imported into EAGLE. They all worked. The last one took a LONG time to draw but I now have a test board with a line drawing of an awesome tiger!

It seems that the process I described above, using the tools I suggested, does actually work. I think if you take your SVG file and convert it to DXF in the same way I did then you might find it works.

Best Regards,

Rachael

So you've not taken your SVG file and converted it to DXF using the web converter I linked to?

The import process in your video seems to take a very long time and if you look at the script it generates there is nothing of note in it which explains why it draws nothing. I think the DXF output from Adobe illustrator must be generating something that the importer in EAGLE doesn't like.

So I searched google for SVG files of varying complexity to test this out, I found a simple one of some gears first, then some more intricate patterns and finally I found an SVG called "Awesome Tiger" all of which I exported to DXF using the website I linked and then imported into EAGLE. They all worked. The last one took a LONG time to draw but I now have a test board with a line drawing of an awesome tiger!

It seems that the process I described above, using the tools I suggested, does actually work. I think if you take your SVG file and convert it to DXF in the same way I did then you might find it works.

Best Regards,

Rachael

Ok my friend I will do that.

Have you got a MSN or ICQ it will more simple isn't it ?

Thanks again for your precious help but I thing I don't have any chance at this time.

Ritchie

Hi Ritchie,

Unfortunately I don't have MSN or ICQ here I'm afraid sorry.

I've not seen your actual SVG file but I can't think why it wouldn't work with the process I have described based on my tests with arbitrarily complicated SVG files. If I can import an awesome tiger as a line drawing into a test board I am sure your logo will import ok as it's likely to be way less complicated than that.

Best Regards,

Rachael

Ok don't worry I can understand...

Do you can send me your pict for to be sure that's the same pict ?

Thanks my friend

Ritchie

That's this pict ?

If yes I tested with the same parameters from you AND THE PICT DOES NOT APPEAR !!!!!! (:(:(:(:(:(:(:(:

Ritchie

Hi Ritchie,

Yes that's the picture and it works fine for me, although it must be noted once converted to DXF it's just a line drawing not a full colour tiger. It also takes an age to draw. When you import the DXF does it take a long time importing? What does the script in the run script window look like?

Best Regards,

Rachael

Also, I notice you are using EAGLE 7.4.0 on OSX. I'm using 7.6.0 on OSX just in case that is anything to do with it.

No this is 7.6 !!

It's a big band at my home

Attachments:

You don't have permission to edit metadata of this video. Edit media Dimensions x Small Medium Large Custom Subject (required) Brief Description Tags (separated by comma) Video visibility in search results Visible Hidden Parent content RE: Import SVG help !!!!! Poster Upload Preview Ok Cancel

May be this my Illustrator export !!

Do you can send your .dxf export ? I am sur it works with you.

Thanks my friend and sorry for waste your time

Ritchie

Right ok, in your first post you had said 7.4.0.

However, I notice you've used Ghostscript to convert your SVG file to DXF? That is NOT what I did. Use the online converter I linked and it will work.

Best Regards,

Rachael

Ritchie Mettens wrote:

 

May be this my Illustrator export !!

Yes I'm pretty sure that's EXACTLY what it is! I told you many messages ago to try the online SVG to DXF converter I linked to!