Actions
Forum Thread Details
  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 95 subscribers
  • Views 2858 views
  • Users 0 members are here
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Circuit Studio step file export fail

vadim007

Hello!

I have some step file export fail.

image

I have never had this issue before. What should I do now?

Parents
  • 0

    Hello

    I'm using Version 1.5.2 (Build 30) and I have the same step file exporting issues.

    Firstly after failing to export a step from CS at all, I had to go into the system\installation directory and instal TeighaX_Setup_3.9.0 which allowed me to successfully export a step, however, the step file had radius and holes removed making it useless for CAD import and analysis.

    I uninstalled then reinstalled CS and TeighaX and now it fails to even export again.

    image

    I've been able to export the project into Altium Designer and the export step is fine.

    I'm a little concern with the lack of updates and no real response to this issue over the web.

     

    If it is a faulty library or part 3d body (as suggested) then it's next to impossible to debug with no feedback from CS error logs.

     

    Any suggestions?

     

    Thanks,

    Mark

Reply
  • 0

    Hello

    I'm using Version 1.5.2 (Build 30) and I have the same step file exporting issues.

    Firstly after failing to export a step from CS at all, I had to go into the system\installation directory and instal TeighaX_Setup_3.9.0 which allowed me to successfully export a step, however, the step file had radius and holes removed making it useless for CAD import and analysis.

    I uninstalled then reinstalled CS and TeighaX and now it fails to even export again.

    image

    I've been able to export the project into Altium Designer and the export step is fine.

    I'm a little concern with the lack of updates and no real response to this issue over the web.

     

    If it is a faulty library or part 3d body (as suggested) then it's next to impossible to debug with no feedback from CS error logs.

     

    Any suggestions?

     

    Thanks,

    Mark

Children
No Data