A voice activated, Raspberry Pi controlled microwave that scans the cooking instructions from the bar code of your food. Oh, did I mention it TALKS too?New Zealand based developer, Nathan Broadbent was inspired by a post on Reddit which said QR codes...
Hi everyone, this is an update on the Raspberry pi development box I built to do my projects on. Firs I will start with the newest additions to the box, the wifi capability, I got this mini wifi addapter for free on ebay rhanks to a paypal frequ...
I recently had an opportunity to check out the Embedded Pi board. I had observed an advertisement when visiting Element 14 one morning and I became intrigued enough to investigate the board. While it is advertised as a “Triple Play Platform” I came a...
GoalTo create a XBMC plugin that works with the Raspberry Pi.PrerequisitesInstall XBMC on the Raspberry Pi (Raspbmc is a popular option)CodeCreating a plugin (or add on) for XBMC isn’t hard, but it does require a directory and a couple of files...
Just thought I would share this with anyone interested. It's just one small step towards my fuel cell powered UAV. Main points in this post are:Completely wireless pi running with a 4.3" screenMax voltage anywhere is 5v (improveme...
My Pi Camera and PiDock captured these outside tonight. Nice hardware! I wish the forum would allow native resolution posts, 450x600 is way too low. This is Kodi and Spidey outside enjoying the evening - yesterday was very stormy, to...
I've created a live time-lapse webcam with my Raspberry Pi Camera. It takes one photo per minute and has been running since my camera arrived on May 15. As I'm currently on the road, I've got the camera running in my camper though it's no...
This is a photo I've took for Pi Camera Board Competition - Outdoor category. To take this picture I use my Raspberry Pi which normally take a picture every 10 minuts since 26 May.
I have been putting a Pi camera and bluetooth module into my case. The BT module receive command from my iphone and do some actions for camera module.I can command the pi camera from my app and takes a snap shot or other commands what I defined.I can...
I have been using the Raspberry Pi camera board to create stunning 360 degree panoramas with the help of my Panobot.The robot is built using lego and lego RCX motors hooked up to a £3 motor controller and 6AA batteries for power.It is normally wirele...
This is a carcam I built with a RaspberryPi, a relay, GPS module and the Pi Camera Board. The project gets mounted to a car visor and takes a picture every few seconds and records it's GPS location. Once home, there's a script that pulls all the pict...
Hi everyone, this is my Raspberry pi development box that I pleced together to do all my Rpi projects.The box is a standard 5 to 24 division utility box that you can get a any home depo for 7 bucks. Put the holes for the Rpi and install th...
I've previously taken some photos of my children's bee box, but I have now had chance to put the Raspberry Pi camera module through it's paces taking some photos of my workshops. I have a room in the house which I used for my software developmen...
In my project I connect a digital picture frame (DPF with hacked firmware) to one USB connector and display the picture from the camera module with local time, date and weather information getting from an RSS weather feed. Every 30 seconds a serially...
This is my entry in to the Raspberry Pi Camera Board Photography Competition - People and Pets category. This series of photos were taken while operating my Raspberry Pi in console mode via its GPIO serial interface and show my cat "Lucky" tucking in...
This is my entry in to the "Your workshop or den" category. It is the first photo I took while running my Raspberry Pi in console mode and shows my den, which I share with my wife (who can be seen in the background). She makes bespoke greetings cards...
When I saw this competition back in May, I thought: "June 14, that's heaps of time!". Now time is nearly up. I got to work on my entry this afternoon after reading through some of the other entries. I knew that I was always going to ...
My project is to connect the Raspberry Pi Camera with my Lensman microscope. I had to do some extreme soldering to get the camera board in a suitable state. I had to move C1 so that the M2 screw head would fit in the hole. Then I moved the front...
This Thursday I was asked by element14 to test and review their new XBMC Solution and here it is! The XBMC Solution is a kit that is designed to go with the Raspberry Pi to have a quick media center out of the box solution, it includes the follo...
I attended the Sensors Expo in Chicago this afternoon. One of the interesting devices I came across was RadioBlocks from Colorado Microdevices:The Colorado Micro Devices RadioBlock is an IEEE 802.15.4 FCC and CE certified wireless modem. It has...
For my submission to the photography competition I took a photo of the clouds, demonstrating how the automatic settings on the camera are very adaptable to varying light levels and still maintain good white balance. This was taken on the first sunny ...
Hey yall, I made a very inexpensive development box for my new Raspberry pi using 5 to 24 spaces organizer box I bought on Home depo and some buttons and battery holder so now my Rpi works on batteries prety cool. Soon Ill be uploading a video o...
