Actions
Forum Thread Details
  • Replies 10 replies
  • Subscribers 241 subscribers
  • Views 1327 views
  • Users 0 members are here
Related
See a helpful answer?

Be sure to click 'more' and select 'suggest as answer'!

If you're the thread creator, be sure to click 'more' then 'Verify as Answer'!

Oscilloscope issue with MP720115

Francois

image

Dear All, 
 
I have an oscilloscope Multicomp MP720115. When I launch it it start normally but after it end with a white screen with the logo of Multicomp Pro.
 
Is somone already had this issue or could you help me ? 
 
Here is a picture of the issue. 
 
Thanks a lot for your help,
 
Simon 
Parents

  • Perhaps you can try resetting it to factory default. Some units can be reset by pressing and holding a button while powering on. See if the manual has any suggestions, otherwise, it may need to go back for repair.

    - Gough

  • in reply to Gough Lui

    The manual suggests to look on the farnell product page. I looked in UK, NZ, Netherlands, Belgium, France, and on the Sinuss reseller shops and couldn't find a download for firmware. The Software is available on several of the sites, but those contain driver, VISA runtime and manual. I could not locate firmware.

    To update your instrument firmware, do the following:
1. Push the Utility button, select Function in the bottom menu, 
select Configure inthe left menu, select About in the bottom menu. 
View the model and the currently installed firmware version.

2. From a PC, visit the Farnell product web page and check if the website offers
a newer firmware version. Download the firmware file. 
The file name must be*.update. 
The file name can be up to 15 characters long (including the suffix).


...

Reply
  • in reply to Gough Lui

    The manual suggests to look on the farnell product page. I looked in UK, NZ, Netherlands, Belgium, France, and on the Sinuss reseller shops and couldn't find a download for firmware. The Software is available on several of the sites, but those contain driver, VISA runtime and manual. I could not locate firmware.

    To update your instrument firmware, do the following:
1. Push the Utility button, select Function in the bottom menu, 
select Configure inthe left menu, select About in the bottom menu. 
View the model and the currently installed firmware version.

2. From a PC, visit the Farnell product web page and check if the website offers
a newer firmware version. Download the firmware file. 
The file name must be*.update. 
The file name can be up to 15 characters long (including the suffix).


...

Children
No Data