I have been struggling to get the main platter printed successfully. I've had 3 prints on the machine for more than 2 days each and it still isn't where I want it.
However I just realized the design challenge is almost over and I have a huge amount of work to do.
In this update I will put together the main drive assembly.
In the next segment I will mount the platter assembly and the lifter assembly on the base plate to complete the mechanical assembly of the machine.
Then I will have to scramble to see if I can get the Raspberry Pi working....
Design Challenge Links:
Project Links:
Blog Glenn 1 - AIY Voice Kit Unboxing
Blog Doug 2 - The Block Diagram and Bill of Materials
Blog Doug 3 - Spice Jar Lift Mechanism
Blog Glenn 2 - Firmware Considerations
Blog Doug 5 - Platter Rotation Mechanism
Top Comments