Actions
Engagement
  • Author Author: pchan
  • Date Created: Date Created
  • Last Updated Last Updated:
  • Views 3737 views
  • Likes 8 likes
  • Comments 15 comments
Related
Recommended

Raspberry Pi 3 Model B Plus (B+) Frequently Asked Questions (FAQ)

 

If you have a question that is not answered in this FAQ, please ask it below in the comments.  If your question is specific to your order or status of delivery, please reach out to us in Feedback & Support.

 

imageWhen will the new Raspberry Pi 3 Model B+ be available for purchase?
The new Raspberry Pi 3 Model B+ is available to purchase from Wednesday 14th March 2018 onwards.  We expect that, due to the huge popularity of the product around the globe, the new board will sell out very quickly and you should still place an order to be amongst the first to receive the product when it is back in stock!

 

US Customers: We'll update you when more stock is available. For now, please back order your unit to reserve your Rasperry Pi!

 

How much does the new model cost?
RRP is $35 USD (excluding sales tax, shipping & handling fees).

 

What is the max limit on how many I can buy?
As many as you can afford! We’ll make as many as you need.

 

Are there any accessories that I can purchase for the new Raspberry Pi 3 Model B+?
Yes, there are accessories to enable users to get started with their Raspberry Pi 3 Model B+:

 

image  16GB NOOBS SD card16GB NOOBS SD card featuring all of the software you would need to get started in the easiest and quickest fashion

image  2.5A Raspberry Pi power supply2.5A Raspberry Pi power supply which will enable users to power their Pi and add-on boards all from one power source – maximizing the benefits of the improved power management capabilities on the new Pi 3 Model B+

image  Official Raspberry Pi CaseOfficial Raspberry Pi Case

image Raspberry Pi PoE HATRaspberry Pi PoE HAT

 

Where can I buy the new Pi?
The new Raspberry Pi 3 Model B+ is available to order from the 14th of March from our online stores or via the 'Buy Now' button at element14.com/RaspberryPi.

Alternatively, please try one of our preferred resellers at:

View Preferred Resellers

 

In which countries can the Raspberry Pi 3 Model B+ be purchased?
The Raspberry Pi 3 Model B+ is available through our very well established global reseller network in the majority of countries around the globe. Please visit the following to check for availability:

Click Here

 

Where can I find more information about the new Raspberry Pi 3 Model B+?
More information on the new model, including videos and an array of other content, can be found at: element14.com/raspberrypi.

 

What about projects using the old board? Can I easily swap to the Pi 3 Model B+?
The new model has the same form and factor as the previous generation of Raspberry Pi (Pi 3 Model B, Raspberry Pi 2Raspberry Pi 2), and in the majority of use cases you will be able to easily swap to the Pi 3 B+. It will depend, though, on the nature of the project that is being undertaken, due to the use of the on-board WiFi and Bluetooth which now typically uses the UART that used to be referred to by ttyAMA0 in Raspbian, which is now ttyS0 and is available via the GPIO.

 

What Raspberry Pi model is right for me?
The new Pi 3 Model B+ board is ideal for customers wishing to develop IoT applications.  It is IoT ready straight out of the box, with improved networking connectivity and thermal dissipation.

For education-based customers, who might not need the benefits of wireless connectivity but may still be seeking extra performance, we have the very popular Raspberry Pi 3 Model B.

The Raspberry Pi 2 provides an ideal solution for those customers seeking even lower power consumption based projects.

The compute module suits those customers who are looking for a small form factor to create their own bespoke embedded hardware, “design in” solutions.

 

Will the Raspberry Pi 3 Model B still be available?
Yes, the Pi 3 Model B will still be the right board for many customers' needs, hence the Pi 3 Model B will continue to be available for sale.

 

Will the Raspberry Pi Touchscreen Display work with the new Raspberry Pi 3 Model B+?
Yes, the Touchscreen DisplayTouchscreen Display will work with the new Raspberry Pi 3 Model B+Raspberry Pi 3 Model B+ board. For installation follow the connection instructions for the Touchscreen Display.

 

If the Raspberry Pi 3 Model B+ is not in stock, how long will it be before it becomes available?

All orders for the Raspberry Pi 3 Model B+ are filled on a first-come, first-served basis. Placing your order now ensures that as soon as we get more units in stock, your new Raspberry Pi 3 Model B+ will be shipped to you. You can expect to receive your Raspberry Pi 3 within the delivery time quoted on our websites as you added the product to your shopping cart.

 

When will my new Raspberry Pi 3 Model B+ arrive?

With huge global demand for the new Raspberry Pi 3 Model B+, stock is selling out fast. If we were unable to service your need with our initial stock, you can expect to receive your Raspberry Pi 3 Model B+ within the delivery time quoted on our websites. We are serving all customers on a first-come, first-serve basis, hence will do our best to deliver your Raspberry Pi 3 Model B+ earlier than the date quoted online.

 

What is the global availability of the new Raspberry Pi 3 Model B+?

There is a huge demand around the globe for the new Raspberry Pi 3 Model B+, with stock being shipped as fast as possible. The new Raspberry Pi 3 Model B+ will be available from the 14th of March onward, with thousands of Pis being delivered every week as stock arrives.

 

 

GETTING STARTED

What software will be made available and where can I download it?
New software is available for download on the Raspberry Pi Foundation’s website.  Please visit: http://www.raspberrypi.org/downloads/ for the latest Pi software.

Alternatively, you can purchase a Raspberry Pi 3 Model B+ with a 16GB NOOBS MicroSD card with the software pre-loaded to ease getting started. See our accessories listing for full details.

 

How do I ensure that the built-in wireless LAN and Bluetooth connectivity works with the Raspberry Pi 3 Model B+?
IMPORTANT: To ensure the built-in wireless LAN and Bluetooth connectivity operates, you will need to update the operating system on the card to the latest version. Ensure you are connected to the internet via wired ethernet and on first boot please click on the ‘Terminal’ icon and type:

sudo apt-get update
sudo apt-get upgrade -y

 

What versions of Bluetooth and wireless LAN are supported?
The new Raspberry Pi 3 Model B+ supports BLE (Bluetooth Low Energy 4.2) and wireless LAN IEEE standards 802.11 b/g/n/ac at 2.4Ghz and 5Ghz.

 

Is there a microSD Card available with the new model?
We recommend that customers purchase a microSD card with the operating systems pre-installed, as it’s the easiest way to get started.

A new 16GB NOOBS MicroSD card16GB NOOBS MicroSD card, including all of the software you would need to get started quickly and easily is available from element14.

 

Will the 16GB NOOBS MicroSD Card I receive work with the other models?
Yes, it will be backwards compatible.

 

Will the microSD card and Operating System from my previous model of Raspberry Pi work with the Raspberry Pi 3 Model B+?
No, if you are using Raspbian you will have to update it first. On your existing Raspberry Pi you can run the following commands from the terminal while connected to the internet:

sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade

sudo rpi-update

Alternatively, you can download the latest SD Card image from raspberrypi.org/downloads.

 

Will the Raspberry Pi 3 Model B+ support more than just the Raspbian operating system?

Yes, the Raspberry Pi already supports 7 official operating systems including:

  • Raspbian
  • Windows 10 IoT Core
  • OpenELEC
  • OSMC
  • Arch Linux
  • RISC OS
  • Pidora

 

Though there may be a delay as these operating systems are rebuilt to support the new hardware components, such as the wireless LAN chip and the on-board Ethernet and USB hub.

 

Are there wireless LAN and/or Bluetooth available on earlier models of the Raspberry Pi?
This functionality is not built-in to the previous models before the Pi 3 (Pi2, B+, etc.), but you can gain access to wireless LAN and Bluetooth by using an appropriate USB dongle (we recommend the WiPi dongleWiPi dongle).

 

Can the Pi 3 Model B+ be overclocked?
Overclocking any model of the Raspberry Pi 3 B+ is not recommended, typically not supported by raspi-config, and you may void your warranty attempting to do so.

 

Does the Raspberry Pi 3 Model B+ benefit from ARMv8 or ARMv7 architecture?

The Raspberry Pi 3 B+ uses the latest BCM2837B0 processor, containing a quad 64 bit A53 processor running at 1.4GHz.  The processor instruction set is compatible with the ARMv8-A architecture, which includes backwards compatibility with the previous ARMv7-A architecture.  The current 32bit Raspbian distribution will only support the ARMv7-A instruction set and other distributions will be able to take further advantage of the ARMv8-A instructions and 64 bit support.

 

Is there a size limit on the microSD Card with the new board?
Cards of size up to 16GB have been tested with Raspberry Pi 3 B+ models; if you choose to use a microSD card of a larger size you do so at your own risk.

 

What power supply do I need?
We recommend you use the new official 5.1V, 2.5A Raspberry Pi power supply2.5A Raspberry Pi power supply available from element14. This power supply will enable users to power their Pi and other accessories from one power source, thus maximizing the benefits of the Pi 3 B+’s improved power management capabilities. While older models of the Raspberry Pi were able to run from a 500mA USB port, this is not recommended for optimal operating conditions.

 

Where can I find schematics for the new model?
We do not issue schematics.

  • ---------------Detectar idiomaAfrikáansAlbanésAlemánAmáricoÁrabeArmenioAzerbaiyanoBengalíBielorrusoBirmanoBosnioBúlgaroCanarésCatalánCebuanoChecoChino (Simplificado)Chino (Tradicional)CingalésCoreanoCorsoCriollo haitianoCroataDanésEslovacoEslovenoEspañolEsperantoEstonioEuskeraFinésFrancésFrisón occidentalGaélico escocésGalésGallegoGeorgianoGriegoGuyaratíHausaHawaianoHebreoHindiHmongHúngaroIgboIndonesioInglésIrlandésIslandésItalianoJaponésJavanésJemerKazajoKirguísKurdoLaoLatínLetónLituanoLuxemburguésMacedonioMalayalamMalayoMalgacheMaltésMaoríMaratíMongolNeerlandésNepalíNoruegoNyanjaPanyabíPastúnPersaPolacoPortuguésRumanoRusoSamoanoSerbioShonaSindhiSomalíSotho meridionalSuajiliSuecoSundanésTagaloTailandésTamilTayikoTeluguTurcoUcranianoUrduUzbekoVietnamitaXhosaYidisYorubaZulúEspañol

     

     

    The detail that we need to solve is the compatibility of an image of an operating system that was loaded in the RAspberry Pi 3B, and when the Raspberry Pi 3B + was acquired it has become impossible to load said image.

     

  • in reply to gramsmurf

    You need to ask this of Microsoft. They are the only ones with that knowledge. My personal guess is: "you're unlikely to get an answer". And the other guess is: "Don't hold your breath".

  • I've bought the new Pi 3B+ and have been wanting to use Windows10 Iot Core as an option for further development - there are still problems with the latest Windows version - it does not support some of the crucial components, e.g. Ethernet (PoE) and others. When will an updated version of Windows10 Iot Core be available that supports the Pi 3B+ totally?

  • Will  a Samsung Evo 64GB micro SD card work in a Raspberry Pi. I've also tried a Sandisk 64GB micro SD card. Being a rookie I downloaded all the Noob installer files onto the Micro SD cards, inserted the SD cards, powered up the Raspberry Pi, but nothing happened. The Pi does not appear to recognize the SD card or the software. I was under the impression that Pi 3 B+ had a Push to load & a push to remove (click) micro SD card reader, mine does not, it's push in & pull out.  Any recommendations are highly appreciated.

  • in reply to royleith
    Both the laptop and the RPI Ethernet ports are intended to plug into an Ethernet Hub.

    Right!

    But due to requirements for 1000mbps ethernet, ALL wire-pairs on modern ethernet ports are RX capable. And TX. This is because for 1000mbps ethernet, all four pairs are RX and TX at the same time. That's the way it works.

    So ethernet ports that are 1GBPS capable will always allow a direct connection to another host like a pi. (even when the other side is oldfashioned 100mbps like the pi). So electrically the ethernetconnection will work. Now to allow communication between the laptop and the pi you will need to assign IP addresses. Either you run a DHCP server on one of them or you configure the IP addresses statically. Tricky stuff. Not easily explained in a single post. Roy's advice to simply connect both of them to a home router is not bad at all. If the laptop has WIFI you don't need to wire up the cable. Once you get the pi up and running with wifi again, you will no longer need the cable.




  • in reply to ajinkya.khaladkar

    Both the laptop and the RPI Ethernet ports are intended to plug into an Ethernet Hub. If there is any doubt over equipment safety, then connect them together via an Ethernet hub. Routers usually have an integrated, four-port Ethernet hub into which you can plug both the laptop and the RPI. In the olden days, I came across direct connection via Ethernet between PCs, but not recently.

     

    The reason is that all modern devices have wifi. Which raises the point, why are you using an Ethernet cable when both devices are already network-connected via your router's wifi? I have connected all sorts of computers together via wifi including RPIs.

     

    If you need connection when wifi is not available, you could try a serial connection. Both the laptop and the RPI work very well with cheap USB to serial port adaptors. Connect the two serial ports via a 'Null Modem'. Now, you can use a comms terminal program such as Putty (available on both Windows and Linux) to communicate. Set the speed, parity and stop bits to the same setting. I suggest 8N1. This specifies 8 data bits, no parity, 1 stop bit. The comms program will offer flow control settings of 'None', 'RTS/CTS' and XON/XOFF. I suggest 'None' (i.e., no flow control).

     

    Don't worry about the technobabble. It's all very easy. Have a look at https://en.wikipedia.org/wiki/Serial_port. If you want to make your own 'Null Modem' you just need to connect the Transmit wire of one adapter to the Receive wire of the other and then the Receive to the Transmit in the other direction. The Signal Ground is used by both circuits and must be connected between laptop and RPi. The twist in the send and receive ensures that anything sent from one serial port is received on the other serial port receive circuit. When the laptop transmits, the RPi receives and vice verse. Because you are not doing fancy flow control, all the other circuits are irrelevant. It really is just three wires.

     

    If, later, you decide you want flow control, then put a similar twist in the RTS - CTS (Ready To Send - Clear To Send) circuits so that RTS in one is connected to CTS on the other. The ready-made null modem is easier and not expensive.

     

    Anything you can do with a comms terminal program, you can do with any computer programming language including Python. Python is available for free on Linux and Windows.

     

    Serial port devices usually communicate using ASCII characters. Raw data cannot be sent, but there are standard methods to encode the data as characters. Sending raw data will fail because the serial software will react to anything it thinks is a printer or computer control character or string of characters. The XON/XOFF flow control system uses the ASCII Control Characters XON and XOFF to control the sending of data. If this appears in the raw data you are sending, communication will fail.

     

    If this sounds unnecessarily complex, it is blindingly obvious compared with simple Ethernet cable or wifi interconnections or the extreme solution; direct laptop to RPI wifi connections. The latter is possible, but challenging.

  • when i connect my RPI 3 to my laptop through Ethernet cable then RPI is going to heat. is this problem or anything else.

     

    PLEASE  HELP ME...

  • How do I change the 24 HR clock to a 12 HR clock, pi 3 b +, thx in advance

  • How do I auto turn on the num lock on startup, I have a model 3 b +

    , thx n advance KJD

  • in reply to secretweaponvfx

    I had this problem and I got a power supply that was stronger I think mine is 5v 2.1 amp