PYNQ Now Available for the Kria KV260 Vision AI Starter Kit

javagoza over 2 years ago

Great news! PYNQ is now supported on the Xilinx Kria SOM

https://github.com/Xilinx/Kria-PYNQ

Top Replies

javagoza over 2 years ago +3

Really excited. Everything working.
kevinkeryk over 2 years ago +3

I was able to get PYNQ up and running on KV260 following the tips from ralphjy , thanks everyone! -Kevin
javagoza over 2 years ago in reply to albertabeef +3

I have tried with an rpi camera v2 and it does not recognize it. I also don't see support in the repository. https://github.com/Xilinx/PYNQ/tree/master/pynq/lib/_pynq/_pcam5c

Parents

kevinkeryk over 2 years ago

I was able to get PYNQ up and running on KV260 following the tips from ralphjy, thanks everyone!

-Kevin
Cancel
Vote Up +3 Vote Down

Sign in to reply

Cancel

Reply

kevinkeryk over 2 years ago

I was able to get PYNQ up and running on KV260 following the tips from ralphjy, thanks everyone!

-Kevin
Cancel
Vote Up +3 Vote Down

Sign in to reply

Cancel

Children

albertabeef over 2 years ago in reply to kevinkeryk

Kevin,
Can you comment on if the rpi camera v2 will work with this design ?
Or does it only support the Digilent PCAM 5C ?
Regards,
Mario.
Cancel
Vote Up +1 Vote Down

Sign in to reply

Cancel
javagoza over 2 years ago in reply to albertabeef

I have tried with an rpi camera v2 and it does not recognize it. I also don't see support in the repository.

https://github.com/Xilinx/PYNQ/tree/master/pynq/lib/_pynq/_pcam5c
Cancel
Vote Up +3 Vote Down

Sign in to reply

Cancel
ralphjy over 2 years ago in reply to javagoza

Thanks, I just had a chance to try it myself (with a V2.1) and it does not init - I guess the only compatibility between these two cameras is the cable pinout. I looked on the KV260 in /usr/local/share/pynq-venv/lib/python3.8/site-packages/pynq/lib/video and libpcam5c is the only camera library.

Since you don't see other cameras in the source tree, I would assume that the AR1335 is also not supported at this point.

Unfortunately, I don't have any PCAM 5Cs - I'll just have to use the webcam with PYNQ.
Cancel
Vote Up +3 Vote Down

Sign in to reply

Cancel
albertabeef over 2 years ago in reply to ralphjy

Thanks guys for the feedback, good to know :)
Cancel
Vote Up +1 Vote Down

Sign in to reply

Cancel
kru644 over 2 years ago in reply to albertabeef

All examples are for Display Port. How to switch to HDMI output?
Cancel
Vote Up +2 Vote Down

Sign in to reply

Cancel
javagoza over 2 years ago in reply to kru644

The KV260 Vision AI Starter Kit has a built-in video splitter and the video frames are displayed via the DP splitter onto the Display Port and/or the HDMI.
Cancel
Vote Up +2 Vote Down

Sign in to reply

Cancel
kru644 over 2 years ago in reply to javagoza

Thanks. OpenCV Face Detection Webcam succefully works - I see myself on display. But another question - how to return to the previous state, to see Ubuntu desktop instead of my own freezing image?
Cancel
Vote Up +1 Vote Down

Sign in to reply

Cancel