FlaviaLP60-00q.zip contains data files for the FlaviaLP60 implementation of the Free Logic Array, described in Flavia: the Free Logic Array and Chapter 12 of The XXICC Anthology rev 0.0q. FlaviaLP60 is for the ValentF(x) LOGI-Pi FPGA board, rev R1.2. To reduce chances of confusion, I recommend that you only install this file if you want to synthesize Flavia logic for the LOGI-Pi.
FlaviaLP60 rev 0.0q adds four arbitrary function blocks (AFBs) connected to LOGI-Pi's SATA pins.
Unless you're using JTAG, Flavia rev 0.0q won't work with the new LOGI-Pi-2, marked R1.5.1 on the PC board. LOGI-Pi-2 has an I2C GPIO expander, so programming LOGI-Pi-2 directly from RasPi is different. I'll add LOGI-Pi-2 to a future release if there's enough demand.
Flavia is part of XXICC. For more information on XXICC, see the 'blog post XXICC (21st Century Co-design) release 0.0q and XXICC's home page: xxicc.org.
This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License. To view a copy of this license, visit creativecommons.org/licenses/by-sa/3.0/. No warranty is expressed or implied.
