The DockBot is my take on a concept vision-guided robot that goes to the charger, picks up a mock charging handle, and then moves to the car and plugs it in. I will simulate this with a fixed external camera and two printed Aruco marked targets ...
EVA Guardian
Intelligent EV Battery Insight, Safety & Emergency Response System
EZ-EV CHALLENGE FINAL REPORT
Author: Sumanth M N
Design Challenge: EZ-EV Design Challenge (element14 Community)
Project Name: EVA Guardian
GitHub Repo...
Project GEPARD V5.0: Final Summary, Scope Creep, and Engineering Retrospective
After weeks of aggressive CAD modeling, 3D printing failures, strict power routing, bare-metal coding, and an absolute gauntlet of hardware troubleshooting, Project GEPARD...
shamelessly taking some extra time to complete the project as per the discussion in Challengers, Post your Projects!
TL;DR
A system for characterising salvaged lithium cells from disposable vapes — measuring capacity, internal resistance, ...
2026.08.16 · post, project
Project HALL-w-EV - Autonomous vehicle
Hi, it's Hambreros and Tamadillo. We set out to have a bit of fun creating an autonomous vehicle with not much more than an UNO Q and a few bits of wire. There wasn't much har...
1. IntroductionThe development of intelligent transportation systems is becoming increasingly important, especially in areas related to healthcare, elderly care, and assistive technologies. Autonomous mobility solutions may one day help people with l...
