Sci-Pi Design Challenge

Welcome to

See how the winners used an approved Raspberry Pi family product to help solve common problems that scientists might encounter during their experiments.

Sci-Pi Forum

Discussion

Are you ready for a scientific challenge?

886 views

3 replies

Latest over 1 year ago
by DAB

Blog - Post List

Any Measurement to Pi - Blog #3: Working with Raspberry Pi Camera

taifur

In this blog post I will show how to connect a camera module to Raspberry Pi, configure it and take image using a Python program. Before getting started let see what type of camera module available for Raspberry Pi and which should work better for ou...
- 6 Jun 2023
Making modules to create Voltage power Supply based on Rasberry Blog #2

GustavoMorales

In my previous blog post, I briefly introduced the concept of utilizing Raspberry Pi as a central control board for various modules. Today, I'd like to delve deeper into one of the fundamental aspects of this idea: the voltage power supply. By harnes...
- 5 Jun 2023
Portable Environmental Monitoring System: Blog#1 - Introduction

meera_hussien

In this project, we embark on a journey to create a versatile and portable solution for environmental monitoring and data collection. With the rapid advancement of technology, the integration of Raspberry Pi—a credit-card-sized computer&m...
- 5 Jun 2023
PiBCI - Post #4 - Making Soft Hydrogel Electrodes and Starting GUI

MarioDL99

Introduction As promised, I will give you updates on the making of hydrogel electrodes. I have already given an explanation on Post#2 why I want to use hydrogel electrodes. I followed the instructions on this paper to make the hydrogel. https://pubs....
- 4 Jun 2023
Measuring air quality with Raspberry Pi #3 - PCB

deimosmuc

Theoretically, you could connect the SPS30 sensor to the IO header of the Raspberry Pi without an interface board, provided that you use the UART interface and find a fully assembled cable (on my cable only the JST connector was connected, the other ...
- 3 Jun 2023
Raspberry Pi Electronic Lab #1 - Сoncept

maxpowerr

Introduction I have accumulated a lot of different devices for signal analysis, this is a USB oscilloscope, a logic analyzer, an SDR receiver, so why not connect all this to a Raspberry Pi and build a whole laboratory for measuring signals around it...
- 2 Jun 2023
Raspberry Pi Electronic Lab # 2 - Monitor

maxpowerr

Introduction For my project, I decided to use an old 17 inch Samsung Syngmaster 173p monitor as a display. The backlights on this monitor have failed, so I'll have to replace them with LED backlights. To do this, I will use the usual 12v cold gl...
- 2 Jun 2023
Measuring air quality with Raspberry Pi #2 - Sensor (Sensirion SPS30)

deimosmuc

Overview In the second part, we look at the SPS30 fine dust sensor from Sensirion. In doing so, we look at the measurement principle, the connector, and the most important sensor features and there is a digression into the WHO recommendations on fin...
- 1 Jun 2023
Pollinator Pollster, Part 3: Radios, Power System, Server

soldering.on

Pollinator Pollster (Powered by Pi) Welcome to the third blog post of this project. In the last week, all components for the first prototype have arrived (yay!), I’ve been able to bench-test the power components and radios, and there has been p...
- 31 May 2023
AI vision Reflective Telescope #2 Install OpenVINO on Raspbian

fyaocn

Install OpenVINO on Raspbian Table of Contents 1 RaspberryPi Spec 2 Raspbian OS 3 OpenVINO runtime 4 Next to do 1 RaspberryPi Spec Even known well by most electric engineers, the technical spec shall be listed below to see how powerful it is, Br...
- 31 May 2023