Browse By Tags

  • Experience with custom 3D-printed Raspberry Pi cases?

    I want a custom Raspberry Pi case. I found this open-source case design: https://github.com/marceloeatworld/OpenPiCase Has anyone used a service or printed open-source designs themselves? Any tips for modifying designs for Pi 4 or Pi 5?

  • Researchers 3D-print Robot Upside Down that Walks

    The tiny, soft robot walks right away after being printed. (Image Credit: University of Edinburgh ) For the first time, University of Edinburgh researchers used an open-source, customized 3D printer to create soft, tiny robots that walk after being…

  • Ender 3 pro enclosure recommend

    Hi, I have an Ender-3 pro with the Sprite extruder, I want to buy an enclosure. Is there an enclosure recommended?

  • 3D Printer Filament Calibration | Multicomp Pro 3D Printer Filaments RoadTest

    Hello Element14 Community! This is a short blog post, part of my MultiComp PRO 3D Printer Filament RoadTest , in which I will show how I usually calibrate new filaments for my 3D Printer. The 3D printer filaments I got for this test are a…

  • What is the best 3D printer for under 200 USD?

    Hello, I have recently been looking into getting a 3d printer for hobby engineering projects but am unsure of which printer is the best for my needs. My budget is 200 USD (+- Qualities most important to me are: 1. Able to print strong sunlight resistant…

  • Zoom view in Cura ?

    Silly question... Is there a way to zoom into the "prepare" view in Cura? Specifically, I'm using Ultimaker Cura on a Mac. I'm printing some tiny parts for lego figures, and I would like to see things a bit closer to make sure all is set up correctly…

  • What's the important point for a 3d printer beginner

    As a beginner, when you prepare to get a new printer, what's the key point, speed? core xy? Marlin or klipper? price? I want to learn to 3D printer and to have it as a hobby I do in joy it

  • Multicomp-Pro Filament Settings for Ender 3D Pro?

    Hello, I'm still very new to 3D printing, even though I've had my printer for a while. I finally have some time to really start using it now. My printer is a Creality Ender 3D Pro, and the quality of the sample cat was really good, so the first roll…

  • Read about how Researchers 3D Print Hydrogel for Tissue Engineering for Future Soft Robotics Research

    The diagram shows how the fiber extruder embeds into the hydrogel. (Image Credit: Biohybrid and Organic Robotics Group, Carnegie Mellon University Recent hydrogel 3D printing advancements led to a hydrogel structure with complex 3D geometry, making…

  • China plans to construct a massive 590-foot-tall dam using AI and robots

    Image showing a hydroelectric dam, not the one of this story. (Image Credit: russmac/pixabay) China has ambitious plans to construct an enormous 590-foot-tall dam on the Tibetan Plateau within two years, solely relying on AI, 3D printing technology…

  • Cel Robox Unboxing

    Cel Robox Unboxing
    • https://players.brightcove.net/1362235890001/default_default/index.html?videoId=3954637914001
    • View

  • It's Alive!

    A mechanical tour and design description of Xut the Penguin
    • https://players.brightcove.net/1362235890001/default_default/index.html?videoId=6109012979001
    • View

  • Printing Maix Dock Case

    3D printing a case for Maix Dock Camera
    • https://players.brightcove.net/1362235890001/default_default/index.html?videoId=6100508174001
    • View

  • AnyCubic Mega-S 3D Printer

    First print on AnyCubic Mega-S
    • https://players.brightcove.net/1362235890001/default_default/index.html?videoId=6062038772001
    • View

  • Crown Tools Preliminary Mechanical Design

    Crown Tools helmet impact sensor mechanical base design video
    • https://players.brightcove.net/1362235890001/default_default/index.html?videoId=4075590598001
    • View

  • Heart Reactor Assembly - Counting

    Heart Reactor assembly in operation - counting on the display
    • https://players.brightcove.net/1362235890001/default_default/index.html?videoId=4038539062001
    • View

  • Heart Reactor - Counting

    Heart Reactor breadboard firmware counting
    • https://players.brightcove.net/1362235890001/default_default/index.html?videoId=3988230700001
    • View

  • Active Business Card Holder

    demo of a vibration sensor built into a business card holder
    • https://players.brightcove.net/1362235890001/default_default/index.html?videoId=3955034827001
    • View

  • form1

    form1
    • https://players.brightcove.net/1362235890001/default_default/index.html?videoId=1864882142001
    • View

  • Joseph DeSimone: What if 3D printing was 100x faster?

    What we think of as 3D printing, says Joseph DeSimone, is really just 2D printing over and over ... slowly. Onstage at TED2015, he unveils a bold new technique - inspired, yes, by Terminator 2 - that's 25 to 100 times faster, and creates smoot
    • https://youtube.com/watch?v=ihR9SX7dgRo
    • View

  • Printrbot Jr.: Print Your Own Yoda

    Printed on a Printrbot Jr., Yoda (http://www.thingiverse.com/thing:10650) at 0.3mm layer height using PLA
    • https://youtube.com/watch?v=0aFLQhSBf2Y
    • View

  • The MakerBot Replicator 2 Desktop 3D Printer - Time Lapse: Paris Building

    http://www.makerbot.com/replicator2http://www.thingiverse.com/thing:30649The MakerBot
    • https://youtube.com/watch?v=pFvozQCGvfo
    • View

  • Rostock printing Owl statue by cushwa

    Blog with more updates: http://deltabot.tumblr.comRostock printer: http://www.thingiverse.com/thing:17175Owl statue: http://www.thingiverse.com/thing:18218
    • https://youtube.com/watch?v=3UOq-CQsbNo
    • View

  • 3D Printed Record - 'Still Alive'

    A 3D printed record for the Fisher-Price record player playing 'Still Alive' from Portal - can be purchased at Shapeways: http://www.shapeways.com/model/426154/clockwork_record.html?gid=ug
    • https://youtube.com/watch?v=ElAJJnSvQtk
    • View

  • An unexpected journey

    I had a great start to 2015, I'd just been selected to Road Test a Cel Robox 3D printer at the end of December and managed to get detailed look at the inside of the printer and also do some test prints before the printer went off for an upgrade at the…