Winners Announcement: Circuit Prototyping Techniques!

4 Apr 2022

Congratulations to dougw for Prototyping Techniques - In Search of the Easy Way! You are the grand prize winner and you win a $200 shopping cart.

Congratulations to jancumps for Turn a standard oscilloscope into a solder-in one, jc2048 for P14 Prototyping Techniques: Attempting to Measure Op Amp Open-Loop DC Gain , and colporteur for I'm Board...Cutting Board to Printed Circuit Board! You are the first place winners and a $100 shopping cart.

The Circuit Prototype Techniques contest was a joy to watch and it was great to see so many of our regular members share their stories and individual techniques. We've listed a a few honorable mentions but really this was a solid batch of projects from top to bottom. From crazy eyeballs to stacks of schematics to reviving the love of 80s prototyping techniques, this contest had it all. After taking a look at this announcement, we hope you'll take some time to visit some of these posts and learn something useful in the process. We knew going in this was a popular topic among community members and this didn't disappoint.

Bravo to everyone who participated!

Without further ado.... Here are your winners!

The Grand Prize:

Prototyping Techniques - In Search of the Easy Way by dougw

First Place Winners:

Turn a standard oscilloscope into a solder-in one by jancumps

P14 Prototyping Techniques: Attempting to Measure Op Amp Open-Loop DC Gain by jc2048

I'm Board...Cutting Board to Printed Circuit Board by colporteur

Honorable Mentions:

There were a lot of great projects and here are a few more highlights of stuff that caught our attention:

Prototyping experiences by strb

Proto Board Performance Enhancing Wingdings by kmikemoo

EyeBall Thingy by dubbie

Pluggable Module Prototyping for Baluns and other Components by shabaz

Old times by redcharly

Keep Being Awesome and Thank you for your continued support of Project14!

Be sure to congratulate the Winners in the Comments Below!

Top Comments

Parents

Jan Cumps over 2 years ago

The shopping cart arrived.

Pi 4 Pi 4 PSU
yellow and green probes with grabbers at the business end
SMD leds, green and red
a set of 2000 V SMD capacitors

A HDMI to mini-HDMI cable is on its way.
- Cancel
- Vote Up 0 Vote Down
- Sign in to reply
- More
- Cancel

Comment

Jan Cumps over 2 years ago

The shopping cart arrived.

Pi 4 Pi 4 PSU
yellow and green probes with grabbers at the business end
SMD leds, green and red
a set of 2000 V SMD capacitors

A HDMI to mini-HDMI cable is on its way.
- Cancel
- Vote Up 0 Vote Down
- Sign in to reply
- More
- Cancel

Children

shabaz over 2 years ago in reply to Jan Cumps

Getting quite frustrating finding a suitable PSU for the Pi 4 + MCC172 Measurement card.. the Stontronics PSU that is advertised as Pi 4 capable does work very well as a Pi 4 power supply, but has some noise. I can find (high-end) phone/tablet chargers that have a cleaner output, but they cannot sustain the demand from the Pi 4, and there are brownouts. I've yet to find any PSU that has both low noise, and can run the Pi 4 (with the measurement card). Figure-8 connector would be nice too, but that's just dreaming : )
- Cancel
- Vote Up 0 Vote Down
- Sign in to reply
- More
- Cancel
Jan Cumps over 2 years ago in reply to shabaz

I'm going to try and compare the adapter above vs a Lenovo laptop brick with the DAQ HAT from the road test.
- Cancel
- Vote Up 0 Vote Down
- Sign in to reply
- More
- Cancel
Jan Cumps over 2 years ago in reply to Jan Cumps

Done.
- Cancel
- Vote Up 0 Vote Down
- Sign in to reply
- More
- Cancel