Navigation Widget for project14
Injecting from file: https://community.element14.com/e14/assets/main/navigation-menus/project14.html?v=bbc6f42d-ed59-4806-a4a5-848cf05b2b0f
Every Christmas Tree has small LEDs and ornaments, so I thought, why not combine these 2 into one thing? In this project, I'll show you how I made a spinning Christmas Tree ornament that lights up and changes colors!
A simple application to predict the activity based on sensor data will be done on edge and the inference result will be mapped into Santa's actions and visualized with a help of a display.
Introducing "TipsyTunes Festive Light Show"! Arduino magic meets holiday cheer with 25 LEDs in beer bottles and a buzzer belting out three Christmas tunes. Remote-controlled festive mayhem in every sip! Cheers to tipsy technology!
This is an incredible LED Christmas Tree I made by Charlieplexing 206 LEDs. For driving the LEDs I used just an Arduino Nano. No driver IC, transistors, or resistors are used in the project. So, the circuit is very straightforward. For arranging the LEDs…
I designed this hexapod robot to navigate challenging obstacles using its six legs. Smooth leg movements and balance are the primary goals of creating this hexapod during the winter holiday. I'am built with STM32 and Arduino IDE. The robot can move in…
Christmas cards are generally made of a card stock that works well to make into little boxes that are perfect for small electronic projects. The usual size of the cards also works out to a box close to the size of the well-known Altoids tins.
A breathtaking animated light show on the top of the Christmas Tree using a 3d printed Angel, rotating 60mm suncatcher crystal illuminated underneath with a NeoPixel ring projecting an Aurora like light, and 10 red lasers for the kitties amusement.
.jpg-100x100x2.jpg?sv=2016-05-31&sr=b&sig=yz7zuZ9nRTJS7T7wg0PrUR%2FSbVGMXLFauXY06H53JNo%3D&se=2024-12-05T23%3A59%3A59Z&sp=r&_=+meWcyTdl4l0Y2MIDud+EA==)
