I was the very pleased and honoured recipient of two $100 winners prizes for Project14 competitions that I entered recently and Element14 were kind enough to let me put these two prizes together to so I could get Marty the Robot. This is the wa...
Here's the video for my project! It's been fun working along side some very smart individuals. Lots of good projects in this mix. I hope you all enjoy! Don't forget to comment and let me know what you think. www.youtube.com/wa...
R2D2 is a monumental icon regardless of its physical size - that has meaning for a large number of people - one of the most popular characters who has no speech.
I have been planning for quite a while to build an R2D2, but every time I took a concre...
After a late night last night with a test assembly of my Tiny Mobile Robot I wasn't quite so chipper this morning as I usually am. Still, I did have time to think about how to connect everything together so it would fit inside the shell. I used a bi...
I would like to present a tree made from 15 white warm LEDs, winding wire and powered from USB. Each LED is soldered to two winding wires and protected by white heat-shrink tubing. I used this wires with LEDs it to form branches and trunk of tree. ...
Since creating the Jumbo Servo I've been thinking about what else I could make in a jumbo size. The LED seemed the obvious choice. I started by looking at pictures of LEDs up close. I then went on the hunt for different parts to help me along....
Introduction
I recently had the pleasure of Building Frank's Milliohm Meter a project by fmilburn that was a Project14 Test Instrumentation entry. I thought it would be nice to use his Project14 project, to build my Project14 project : )
 ...
