This post contains the link to my blog posts for Forget Me Not challenge. I'll keep updating this page as and when I posts new blogs. The challenge runs untill 24th Oct 2014. So you can expect atleast a new post every week till then.
Index
In this post, I discusses about the proposal for challenge, architecture of the proposed system and introduces a few tools I'm going to use.
[FMN#01] : Ubuntu, meet openHAB.
This post explains about my first experience with setting up openHAB in my Ubuntu laptop. This also has links to good posts on how to setup openHAB on raspberry Pi.
[FMN#02] : Ubuntu, meet enocean Pi
This post explains how to interface enocean Pi to a laptop running ubuntu with a USB to TTL serial converter. I uses TI Connected Launchpad instead of serial converter.
[FMN#03] : Decoding Enocean Protocol with Enocean Py
Introducing 'Enocean Py' -- a light weight application for decoding ESP3 protocol.
[FMN#04] : Setting up openHAB and enocean sensors with Raspberry Pi
Steps to setup openHAB and enocean gateway in your raspberry pi.
[FMN#05] : Why tweet when you can dweet??
Introducing dweet.io - twitter for devices
[FMN#06] : Let's dweet with raspberry pi
Wiring together Enocean-Py, Dweepy and raspberry Pi to work as a gateway for enocean devices to web.
[FMN#07] : Dweeting from openHAB
Using HTTP binding to update device status from and to dweet.io
[FMN#08] : MQTT - The language of IoT
What is MQTT and how to use it with openHAB. Includes a demo of controlling TI Connected Launchpad from openHAB using MQTT.
[FMN#09] : Designing the room contollers
Intel Galieo, Python and Eclispe Paho.
[FMN#10] : One Switch to control them all
Enocean-Py, Paho and and intelligent home network that knows where you are.
[FMN#11] : OpenHAB @ Home (Summary)
How the entire thing is wired together?
Top Comments