FPGA

Blog You Can Participate in the "7 Ways to Leave Your Spartan-6" Program Even if You had Not Received a Free Board

Join FPGA to participate - click to join for free!

Group Actions

Engagement

Author Author: rscasny
Date Created: 6 Jun 2022 4:46 PM Date Created
Views 1397 views
Likes 4 likes
Comments 5 comments

Related

Recommended

You Can Participate in the "7 Ways to Leave Your Spartan-6" Program Even if You had Not Received a Free Board

rscasny

6 Jun 2022

I wanted to make sure anyone who had NOT received a free Arty S7 board from element14 still can participate in the program.

I wished I had more than 25 boards to give out, but I have budget and stocking limitations.

However, if you would like to participate, you can, but you'd have to purchase the board here

The board is important because the activities associated with it earn the most points.

The participants with the most points can win our big prizes.

If you have any questions, please leave a comment below and I'd be happy to answer your question.

Randall

--element14 Team

Parents

javagoza over 4 years ago
Thank you Randall!
I've had the board for two weeks now and I encourage anyone who wants to get started with FPGAs to get involved.
Xilinx has done an incredible job together with Digilent so that you can start without having much idea of hardware as it is in my case. I have prepared two blogs following the Digilent reference tutorials and everything has been satisfying to see things working.
- Arty S7 50 First Power Up and Hardware-Only Blinky
- Arty S7 50 First Baremetal Software Project
I had a problem with the card, a voltage regulator was burned on the first day but the FPGA works perfectly and several members of the community have helped me so that I can skip that regulator if I need it.
- Cancel
- Vote Up 0 Vote Down
- Sign in to reply
- More
- Cancel

Comment

javagoza over 4 years ago
Thank you Randall!
I've had the board for two weeks now and I encourage anyone who wants to get started with FPGAs to get involved.
Xilinx has done an incredible job together with Digilent so that you can start without having much idea of hardware as it is in my case. I have prepared two blogs following the Digilent reference tutorials and everything has been satisfying to see things working.
- Arty S7 50 First Power Up and Hardware-Only Blinky
- Arty S7 50 First Baremetal Software Project
I had a problem with the card, a voltage regulator was burned on the first day but the FPGA works perfectly and several members of the community have helped me so that I can skip that regulator if I need it.
- Cancel
- Vote Up 0 Vote Down
- Sign in to reply
- More
- Cancel

Children

No Data