Actions
Forum Thread Details
  • State Not Answered
  • Replies 16 replies
  • Subscribers 497 subscribers
  • Views 2547 views
  • Users 0 members are here
Related

Spartan 6 Connectivity issue

Krishnajdl10

The spartan 6 board is not getting detected in ISE. The connection is via JTAG. The board is getting powered on but it is not getting recognized when boundary scan is carried out in select target device phase. Kindly help in resolving this issue

Parents Reply
  • 0 in reply to Krishnajdl10

    Hi,

    You could try a different programmer. Either in the VM, or outside it (by transferring your bit file to outside the VM).

    There are lots of different programmers, for example you could even use a Raspberry Pi as a programmer. You'd have to google to find a decent one. It is fairly common, because there were at one time a fair amount of plug-on boards for the Pi or BeagleBone Black that had a Xilinx FPGA for experimentation, and they needed a way to transfer the data. If you google "Raspberry Pi Xilinx Programmer" or similar, you'll come across it.

Children
No Data